Functionally graded materials (FGMs) enable applications in fields such as biomedicine and architecture, but their fabrication suffers from shortcomings in gradient continuity, interfacial bonding, and directional freedom. In addition, most commercial design software fail to incorporate property gradient data, hindering explorations of the design space of FGMs. Here, we leveraged a combined approach of materials engineering and digital processing to enable extrusion-based multimaterial additive manufacturing of cellulose-based tunable viscoelastic materials with continuous, high-contrast, and multidirectional stiffness gradients. A method to engineer sets of cellulosebased materials with similar compositions, yet distinct mechanical and rheological properties, was established. In parallel, a digital workflow was developed to embed gradient information into design models with integrated fabrication path planning. The payoff of integrating these physical and digital tools is the ability to achieve the same stiffness gradient in multiple ways, opening design possibilities previously limited by the rigid coupling of material and geometry.
The growing timber manufacturing industry faces challenges due to increasing geometric complexity of architectural designs. Complex and structurally efficient curved geometries are nowadays easily designed but still involve intensive manufacturing and excessive machining. We propose an efficient form-giving mechanism for large-scale curved mass timber by using bilayered wood structures capable of self-shaping by moisture content changes. The challenge lies in the requirement of profound material knowledge for analysis and prediction of the deformation in function of setup and boundary conditions. Using time- and moisture-dependent mechanical simulations, we demonstrate the contributions of different wood-specific deformation mechanisms on the self-shaping of large-scale elements. Our results outline how to address problems such as shape prediction, sharp moisture gradients, and natural variability in material parameters in light of an efficient industrial manufacturing.
Through their anisotropic cellular mesostructure and differential swelling and shrinking properties, hygroscopic plant structures move in response to changes in the environment without consuming metabolic energy. When the movement is choreographed in sequential time steps, either in individual structures or with a coordinated interplay of various structural elements, complex functionalities such as dispersal and protection of seeds are achieved. Inspired by the multi-phase motion in plant structures, this paper presents a method to physically program the timescale and the sequences of shape-change in 4D-printed hygromorphic structures. Using the FDM 3D-printing method, we have developed multi-layered, multi-material functional bilayers that combine highly hygroscopic active layers (printed with hygroscopic bio-composite materials) with hydrophobic restrictive and blocking layers (printed with PLA and TPC materials). The timescale of motion is programmed through the design of the mesostructured layers and 3D-printing process parameters, including thickness (number of printed active layers), porosity (filling ratio of the active layer), and water permeability (filling ratio of the blocking layer). Through a series of experiments, it is shown that the timescale of motion can be extended by increasing the thickness of the active layer, decreasing the porosity of the active layer, or increasing the filling ratio of the hydrophobic restrictive and blocking layers. Similarly, a lower thickness of the active layer and lower filling ratio of all layers result in a faster motion. As a proof of concept, we demonstrate several prototypes that exhibit sequential motion, including an aperture with overlapping elements where each completes its movement sequentially to avoid collision, and a self-locking mechanism where defined areas of the structure are choreographed to achieve a multi-step self-shaping and locking function. The presented method extends the programmability and the functional capabilities of hygromorphic 4D-printing, allowing for novel applications across fields such as robotics, smart actuators, and adaptive architecture.
The implementation of active and responsive materials in architecture and construction allows for the replacement of digitally controlled mechanisms with material-based systems that can be designed and programmed with the capacity to compute and execute a behavioral response. The programming of such systems with increasingly specific response requires a material-driven computational design and fabrication strategy. This research presents techniques and technologies for significantly upscaling hygroscopically actuated timber-based systems for use as self-constructing building surfaces. The timber’s integrated hygroscopic characteristics combined with computational design techniques and existing digital fabrication methods allow for a designed processing and reassembly of discrete wood elements into large-scale multi element bilayer surfaces. This material assembly methodology enables the design and control of the encoded direction and magnitude of humidity-actuated responsive curvature at an expanded scale. Design, simulation, and material assembly tests are presented together with formal and functional configurations that incorporate self-constructing and self-rigidizing surface strategies. The presented research and prototypes initiate a shift toward a large-scale, self-construction methodology.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.