Comprehensive Study on Elastic Moduli Prediction and Correlation of Glass and Glass Ceramic Derived from Waste Rice Husk

Lee, Chee Sun; Матори, Хамирул Амин; Sidek, H.A.A.; Kamari, Halimah Mohamed; Ismail, Ismayadi; Zaid, Mohd Hafiz Mohd

doi:10.1155/2017/8962986

Cited by 6 publications

(4 citation statements)

References 46 publications

(46 reference statements)

Supporting

Mentioning

Contrasting

Order By: Relevance

“…This may be due to the breakage of the P–O–P bonds in the phosphate network resulting in terminal oxygen formation. At high mole percentage of calcium fluoride and one mole percentage of titanium oxide content in the bioglasses it leads to ionic crosslink bridges between the nonbridging oxygen of phosphate network 15–17 …”

Section: Resultsmentioning

confidence: 99%

“…At high mole percentage of calcium fluoride and one mole percentage of titanium oxide content in the bioglasses it leads to ionic crosslink bridges between the nonbridging oxygen of phosphate network. [15][16][17] Followed by density study, pulse echo method was used to measure various elastic moduli (Young's, Shear, Bulk, and Longitudinal), which provides an idea regarding the strength and interatomic potential of the biomaterial. The load bearing capacity of the prepared materials used for bone implants is assessed by their elastic properties.…”

Section: Physical and Thermal Characterizationmentioning

confidence: 99%

See 1 more Smart Citation

Preparation and physical‐biological characterization on titanium doped fluorophosphate nanobioglass: Bone implants

Sankaralingam¹,

Sakthivel²,

Subbiah³

et al. 2021

Int J Ceramic Engine & Sci

View full text Add to dashboard Cite

Metals, ceramics, natural or synthetic polymers, and their composites are used as biomaterials aiding the clinician in the repair. Among these, biomaterials in orthopedics have very many demanding characteristics like tunable density, elasticity, and strength near to that of bone, bioresorbability and the ability to bond to live bone and not being toxic to the cells. Hench and Clark paved the way for preparing bioglasses and it is named as 45S5 bioglass. The 45S5 bioglass promotes osteogenesis by

show abstract

Section: Resultsmentioning

confidence: 99%

Section: Physical and Thermal Characterizationmentioning

confidence: 99%

Preparation and physical‐biological characterization on titanium doped fluorophosphate nanobioglass: Bone implants

Sankaralingam¹,

Sakthivel²,

Subbiah³

et al. 2021

Int J Ceramic Engine & Sci

View full text Add to dashboard Cite

show abstract

“…In the literature, the value of Poisson's ratio for similar bismuth zinc borosilicate glass frits range between 0.25 and 0.33. 24,25 The value of the Young's modulus of the enamel n°2 measured by curvature technique is approximately 40 GPa, by using a Poisson's ratio of 0.27. In the literature, the average Young's modulus of the enamel n°2, measured by nanoindentation technique, has been reported to be 96.4 ± 27.1 GPa.…”

Section: Discussionmentioning

confidence: 99%

Simultaneous measurement of coefficient of thermal expansion and biaxial modulus of enamel thick films deposited on glass substrates by curvature technique

Walch

Benedetto

Bacharouche

et al. 2020

Int J of Appl Glass Sci

View full text Add to dashboard Cite

The measurement of the thermoelastic properties of enamel thick films deposited onto soda‐lime silicate glass is challenging. The film properties can be modified by the interdiffusion between the glass substrate and the enamel and by the crystallization that occur during the sintering. The average biaxial modulus and coefficient of thermal expansion of several enamel thick films deposited onto 700 µm glass substrates have been simultaneously measured using the curvature method. The value of the coefficient of thermal expansion measured with a dilatometer on enamel bulk samples is significantly higher, associated with the absence of diffusion and a different enamel structure. The interdiffusion of elements between the enamel film and the glass substrate has been demonstrated with Time‐of‐Flight Secondary Ion Mass Spectrometry (TOF‐SIMS). The amount of porosity ratio presents in the enamel film, evaluated via Scanning electron microscopy(SEM), has a great influence on the biaxial modulus. The amount of compressive stress in the enamel, calculated from the film thermoelastic properties, is strongly correlated with the mechanical performance of enameled glasses, investigated by Ring On Ring methods. Therefore, a high Young's modulus for the enamel and a mismatch of the coefficient of thermal expansion between the enamel film and substrate, the film having the lowest value, has been found to increase significantly the mechanical performance of the stack.

show abstract

“…Using the values obtained for both V t and G , t the elastic moduli could be calculated [49,52,54], the results are presented in table 2.…”

Section: G B O N Gmentioning

confidence: 99%

Physical, optical, thermal, structural and mechanical properties of alkaline earth borate glasses

Elkholy,

Atif,

Aslam

et al. 2024

Phys. Scr.

View full text Add to dashboard Cite

Binary alkaline earth borate glasses were synthesized via the melt quenching technique. The density and molar volume of the resultant glasses were determined experimentally. The glass optical basicity has been found to increase with the glass polarizability. The optical properties of the glasses were comprehensively analyzed, revealing a shift in the cutoff wavelength towards longer wavelengths with increasing glass optical basicity. Additionally, the optical band gap (Eg) was estimated. Structural investigations unveiled an increase in the abundance of BO4 units as the glass optical basicity increased. Furthermore, the glass transition temperature was observed to decrease with decreasing cation field strength. Glass packing density and B2O3 packing factor were calculated to assess structural variations. The longitudinal and shear velocities were determined using the pulse echo technique, providing insights into the elastic moduli of the glasses. The Makishima and Mackenzie approach was employed to predict the elastic moduli, yielding results in good agreement with experimental data. This comprehensive analysis sheds light on the relationship between composition, structure, and mechanical properties of binary alkaline earth borate glasses, offering valuable insights for potential applications.

show abstract

Comprehensive Study on Elastic Moduli Prediction and Correlation of Glass and Glass Ceramic Derived from Waste Rice Husk

Cited by 6 publications

References 46 publications

Preparation and physical‐biological characterization on titanium doped fluorophosphate nanobioglass: Bone implants

Preparation and physical‐biological characterization on titanium doped fluorophosphate nanobioglass: Bone implants

Simultaneous measurement of coefficient of thermal expansion and biaxial modulus of enamel thick films deposited on glass substrates by curvature technique

Physical, optical, thermal, structural and mechanical properties of alkaline earth borate glasses

Contact Info

Product

Resources

About