Combustion synthesis of TiN–Ti silicide and TiN–Si3N4 composites from Ti–Si3N4 powder compacts in Ar and N2

Data on the influence of TiN on wear and corrosion behavior of Ti–6Al–4V alloy fabricated through spark plasma sintering

“…Ideal operational parameters were used. Sintering temperature was 1000 °C, pressure 50 MPa and the holding time 6 min under argon atmosphere [3].…”

Fabrication and characterization of TiN nanocomposite powders fabricated by DC arc-plasma method

“…Recently, one of those TiN nanocomposites, TiN-Ti-silicides composite, has intensively been investigated, as they exhibited superior mechanical properties and significantly improved hightemperature oxidation resistance in comparison to the monolithic TiN coating [10][11][12][13][14]. Llauro et al introduced Ti 5 Si 3 into a TiN matrix by in situ chemical vapor deposition (CVD) and confirmed the improvement of oxidation resistance in the temperature range of 800-1150 • C [10].…”

“…Cho et al prepared TiN/Ti-silicides (Ti 5 Si 3 and TiSi 2 ) with different molar ratio of Ti and Si 3 N 4 and studied the silicide component of the products [12]. Yeh and Chen chose solid-state and solid-gas combustion of the Ti-Si 3 N 4 powder compacts for synthesis of TiN and Ti-silicide [13]. Yeh and Teng used Si 3 N 4 as a reactant in preparation of TiN-Ti 5 Si 3 composites by solid-state self-propagating high-temperature synthesis reactions [14].…”