Characterization of Thermal Sprayed Coatings with Lock-In Thermography

Abstract

Lock-in thermography is a nondestructive inspection method based on modulated heat transport in combination with infrared imaging. Measurement times are relatively short, about 3 or 4 minutes, and the method is amenable to inspecting a wide range of large and small parts. This paper describes the basic principle behind the method and its application to different thermal sprayed coatings (e.g., Cr-steel, Al2O3). It explains how the test samples were prepared with artificial defects simulating delaminations, inclusions, and other types of imperfections and how the method performed in each case.