Automatic Chili Plant Watering Based On Internet Of Things (IoT)

Abstract

Watering plants that are carried out by farmers on the land of thieves is still manual using human power, manual watering what is often used is to water with water through a water hose then the end of the hose is fitted with a water rotating device that is useful to rotate water so that it can reach many plants. To facilitate the watering of plants when farmers leave the city on agricultural land and know the level of soil moisture periodically, an automatic watering device based on IoT notification is made using the arduino Uno mikrocontroler. The whole tool is divided into several parts which consist of smartphone, esp, arduino uno revision three microcontroler, soil moisture,relay module, and pump. This tool works when the esp module connects to the internet, from esp then to siol moisture sensor if the level of moisture in the soil is detected below 70%, then provide information to the arduiono microcontroler to provide information on the humidity level to the LCD and the website www.pemuri.unaux.com as well as watering orders for plants. From the microcontroler then to the relay module to turn on the water pump. After the pump is running, the automation of the soil mositure sensor re-detects the soil moisture level, if it is above 70% then gives it again to the arduino microcontroler to give the command to turn off the pump. The results of the research show that esp can communicate well with arduino uno when it’s connected to the internet.

Realtime Monitoring and Analysis Based on Cloud Computing Internet of Things (CC-IoT) Technology in Detecting Forest and Land Fires in Riau Province

“…On the other hand, the application of the DHT22 Sensor is used as a monitoring of air quality and humidity in measuring the level of air quality that useful during air conditions caused by fires [20]. Meanwhile, to determine the location of the forest or land fire, the researcher uses the Neo 6m GPS module [21] and to measure soil moisture levels by applying the soil sensors [22], [23]. In measuring the condition of smoke levels in the air, an MQ2 sensor is required [24].…”

Expert System For Diagnosing Diseases in Toddlers Using The Certainty Factor Method

“…However, with the convenience of having a doctor or midwife, sometimes there are also weaknesses, such as limited working hours (practice) and the number of patients who have to wait in long queues at no small cost or because of long distances (Ramadhanti & Eviyanti, 2021) (Gozzal & Indarti, 2017). In this case, parents need an expert who can make it easier to diagnose the disease early so that they can take early prevention (Yanto et al, 2017;Irawan et al, 2022;Putra et al, 2022).…”

LTE Optimization Using The Electrical Tilt Method At The Mandau Site

“…The development of telecommunications technology is very rapid, so it is very important for users to obtain communication and information quickly and easily (Arin Anjani, 2015;Ulfah & Sri Irtawaty, 2018;Yuliana et al, 2021) Long Term Evolution (LTE) is the name of the Third Generation Partnership Project (3GPP) Project to raise the bar for 3rd generation (4G) mobile phones (Hardiyanto, 2020;Panjaitan et al, 2018;Ulfah et al, 2018;Yuliana et al, 2019) provides data rates of up to 100 Mbps on the downlink side and up to 50 Mbps on the Uplink side (Kusumo et al, 2015;Rahmania, 2020;Warsika et al, 2019). LTE networks are advanced communications for accessing GSM/EDGE and UMTS/HSPA based wireless data and LTE technology can provide 300 Mbps downloads and 75 Mbps uploads (Gemiharto, 2015;Rahmat & Chandra, 2022;Sahala & Sirait, 2018;Suparyanto, 2020;Irawan et al, 2022) .…”