Analysis of concrete material through gamma ray computerized tomography

Abstract

Computerized Tomography (CT) refers to the cross sectional imaging of an object from both transmission or reflection data collected by illuminating the object from many different directions. The most important contribution of CT is to greatly improve abilities to distinguish regions with different gamma ray transmittance and to separate over-lying structures. The mathematical problem of the CT imaging is that of estimating an image from its projections. These projections can represent, for example, the linear attenuation coefficient of γ-rays along the path of the ray. In this work we will present some new results obtained by using tomographic techniques to analyze column samples of concrete to check the distribution of various materials and structural problems. These concrete samples were made using different proportions of stone, sand and cement. Another set of samples with different proportions of sand and cement were also used to verify the outcome from the CT analysis and the differences between them. Those samples were prepared at the Material Laboratory of Faculdade de Engenharia de Sorocaba, following the same procedures used in real case of concrete tests. The projections used in this work was obtained by Mini Computerized Tomograph of Uniso (MTCU), located at the Experimental Nuclear Physics Laboratory at University of Sorocaba. This tomograph operates with a gamma ray source of 241 Am (photons of 60 keV and 100 mCi of intensity) and a NaI(Tl) solid state detector. The system features translation and rotation scanning modes, a 100 mm effective field of view, and 1 mm spatial resolution. The image reconstruction problem is solved using Discrete Filtered Backprojection (FBP).

Development and applications of three-dimensional gamma ray tomography system using ray casting volume rendering techniques

“…Though two dimensional (2D) gamma ray tomography has been used in many areas [3][4][5][6] as in important tool of nondestructive evaluation, its combination with volume visualization technique [7][8][9][10], which gives a three-dimensional (3D) tomographic image, can be a very powerful tool to analyze objects without destructing it. In order to explore this technique, the 2D gamma ray computed tomography system of Sorocaba University (MTCU) [11] was modified, so that slices of an object in different positions could be acquire, allowing 3D reconstruction.…”