Cellulose is synthesized at the plasma membrane by cellulose synthase complexes (CSCs) containing cellulose synthases (CESAs). Genetic analysis and CESA isoform quantification indicate that cellulose in the secondary cell walls of Arabidopsis () is synthesized by isoforms CESA4, CESA7, and CESA8 in equimolar amounts. Here, we used quantitative proteomics to investigate whether the CSC model based on Arabidopsis secondary cell wall CESA stoichiometry can be applied to the angiosperm tree aspen () and the gymnosperm tree Norway spruce (). In the developing xylem of aspen, the secondary cell wall CESA stoichiometry was 3:2:1 for PtCESA8a/b:PtCESA4:PtCESA7a/b, while in Norway spruce, the stoichiometry was 1:1:1, as observed previously in Arabidopsis. Furthermore, in aspen tension wood, the secondary cell wall CESA stoichiometry changed to 8:3:1 for PtCESA8a/b:PtCESA4:PtCESA7a/b. PtCESA8b represented 73% of the total secondary cell wall CESA pool, and quantitative polymerase chain reaction analysis of CESA transcripts in cryosectioned tension wood revealed increased expression during the formation of the cellulose-enriched gelatinous layer, while the transcripts of, , and decreased. A wide-angle x-ray scattering analysis showed that the shift in CESA stoichiometry in tension wood coincided with an increase in crystalline cellulose microfibril diameter, suggesting that the CSC CESA composition influences microfibril properties. The aspen CESA stoichiometry results raise the possibility of alternative CSC models and suggest that homomeric PtCESA8b complexes are responsible for cellulose biosynthesis in the gelatinous layer in tension wood.
SummaryThe conformational dynamism and aggregate state of small heat shock proteins (sHSPs) may be crucial for their functions in thermoprotection of plant cells from the detrimental effects of heat stress. Ectopic expression of single chain fragment variable (scFv) antibodies against cytosolic sHSPs was used as new tool to generate sHSP loss-of-function mutants by antibody-mediated prevention of the sHSP assembly in vivo. Anti-sHSP scFv antibodies transiently expressed in heat-stressed tobacco protoplasts were not only able to recognize the endogenous sHSPs but also prevented their assembly into heat stress granula (HSGs). Constitutive expression of the same scFv antibodies in transgenic plants did not alter their phenotype at normal growth temperatures, but their leaves turned yellow and died after prolonged stress at sublethal temperatures. Structural analysis revealed a regular cytosolic distribution of stress-induced sHSPs in mesophyll cells of stress-treated transgenic plants, whereas extensive formation of HSGs was observed in control cells. After prolonged stress at sublethal temperatures, mesophyll cells of transgenic plants suffered destruction of all cellular membranes and finally underwent cell death. In contrast, mesophyll cells of the stressed controls showed HSG disintegration accompanied by appearance of polysomes, dictyosomes and rough endoplasmic reticulum indicating normalization of cell functions. Apparently, the ability of sHSPs to assemble into HSGs as well as the HSG disintegration is a prerequisite for survival of plant cells under continuous stress conditions at sublethal temperatures.
Эксплуатация месторождений нефти – это контроль путем перемещения нефти в ее целиках к скважинам добычи благодаря правильной постановке и пошаговой активации всех скважин, добывающих нефть, и водогазонагревательных, для того чтобы получить определенный порядок их труда при одинаковой и экономичной эксплуатации энергии пласта. Чтобы система разработки нефтяных месторождений была рациональной, следует выполнить такие действия. Выделить используемые предметы на месте нахождения нефти с большим количеством пластов и определить, в какой последовательности их вводить в использование. Объектом эксплуатации может быть либо один продуктивный пласт, либо несколько пластов, что разрабатываются специальной сетью скважин во время проверки и упорядочивания в ходе их использования. Эти объекты в целиках с большим количеством пластов можно поделить на 2 вида. Первыми из них являются основные используемые объекты. Они лучше изучены, имеют высокую степень производства и большие залежи нефти. Вторые же называются возвратными. Они не так продуктивны, как основные, и содержат меньше сырья. Их использование осуществляется через возвращение скважины с основного объекта. Нужно определить сети скважин, как они распределены по используемому объекту, в том числе в какой последовательности. Ставить скважины на объектах можно равномерно на целиках, границы которых не изменяются, и если есть вода под залежами или если нет пластовых вод. На месте образования нефти с передвигающимися границами переноса нефти скважины на объектах устанавливаются по одной параллели с границами нефтеносности. С целью оптимизации системы разработки неразбуренной части одного из объектов месторождения были рассмотрены несколько вариантов сеток скважин с вариацией расстоянием между ними. Представлено обоснование оптимального значения забойного давления для различных гидродинамических условий процесса разработки залежи. Получена зависимость оптимального забойного давления от значения гидропроводности пластовой системы.
Для эффективной эксплуатации месторождений нефти необходима оптимизация технологических параметров. Нормативно не определены оптимальные параметры забойного давления скважин для эксплуатации боковых горизонтальных стволов. В статье оценивается, при каком оптимальном забойном давлении целесообразно эксплуатировать боковой горизонтальный ствол месторождения с максимально «безводным» дебитом. По результатам расчетов и на основе графиков зависимости дополнительной добычи нефти и жидкости от забойного давления, графиков динамики добычи и обводненности выделены 3 группы бурения (зарезки) боковых стволов (ЗБС): с высокой прогнозной стартовой обводненностью (>90 %), средней стартовой обводненностью (около 80 %) и низкой стартовой обводненностью (около 20–50 %) и определены оптимальные параметры забойного давления для каждой из групп.
The problem of optimization of technological parameters as a way to improve the efficiency of oil deposit exploitation is considered in the paper. There are no standards for parameters of well bottom-hole pressure for exploitation of lateral horizontal holes. The paper presents the evaluation of optimum bottom-hole pressure at which it is advisable to exploit the deposit lateral horizontal hole with maximum “water-free” production rate. Following the calculations carried out and analysis of the graphs of additional oil and liquid production dependence on bottom-hole pressure, graphs of production dynamics and water encroachment, it was concluded that 3 groups of drilling (kickoff) of lateral holes (KLH) should be distinguished: with high forecasted starting water encroachment (>90%), average starting water encroachment (about 80%), and low starting water encroachment (about 20-50%). The distinguished 3 groups allow applying the differentiation of parameters, for which optimum bottom-hole pressure parameters for each drilling group were found.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.