Opencast fields mining leads to land disturbance when conducting mining operations and storing of overburden rocks. The timely reclaiming of the disturbed lands according to the legislation requirements is an immediate duty of the subsoil user. The reclamation of the previously mined-out space of quarries refers to an extremely important tasks of the mining enterprise. The use of water management direction in reclamation assumes the use of previously mined-out space of a quarry to create the water reservoir through various methods of rehabilitation. There are presented various ways of designing the coastal zone of the created artificial water reservoirs in the previously mined-out space of the quarries located worldwide, which are used for the recreational purposes. The various profiles of slopes of artificial water reservoirs in a quarry with more low gradients, suitable for swimming and recreation are shown. Designing of a coastal area on the site of a quarry, intended for water reservoirs, depends on the water level position in the created body of water. The water reservoir, as the lake of artificial origin, created on the former quarry site, is shown. The purpose of the article is to substantiate the methodological approaches and engineering solutions concerning reclamation of the mined-out space after the opencast mining for the recreational purposes.

Purpose is to substantiate intensification of dozer dump reclamation in the process of open pit-mining. Methods. Analysis of methods intended to intensify reclamation activities in the context of open-pit mineral extraction under different mining and geological conditions has been applied. Innovative operation schedule of dump reclamation has been developed on the basis of critical analysis and proper analytical research. Findings. Operation schedule to form a dozer dump has been substantiated taking into consideration rock suitability for reclamation making it possible to mitigate impact of mining on the environment. Algorithm to calculate dozer dump parameters has been developed as well as a digital topographic model of selective dump formation. Originality. The developed operation schedule for selective formation of the external dump differs from the available one in the simultaneous layer dumping to intensify surface of its dumped share in the process of open-pit mining. Practical implications. Use of the method of selective surface formation in terms of a dozer dump, taking into consideration overburden suitability for reclamation, helps intensify reclamation of the soils disturbed during field development.

Purpose is to identify the basic joint systems, their characteristics, distribution within the rock mass, and determine impact of the joints on the bench stability. Methods. The risks of strain emergence in the form of blocks sliding along weakness surfaces within the local areas were determined based upon the definition of rock stability loss. The results of large-scale measurements of jointing were processed using circular and bar diagrams as well as stereographic grids. In the context of the paper, kinematic analysis was implemented through Dips Rocscience Inc. Software. Findings. Five basic joint systems have been identified; joints of 2nd and 5th systems are the most commonly encountered among them. The results of the jointing determination within the open pit boundaries have been represented as well as the open pit wall stability in terms of each site inclusive of consideration of potential strains along the sliding surface. Originality. For the first time, zoning of the open pit wall in terms of slide types has been performed. It has been identified that potential shear of a prismatic block is 33%; at the same time, 66% are bench destruction with the block toppling. The risk of wedge-shaped block shear is minimal. Practical implications. The research findings may be helpful to define and select both parameters and conditions of safe mineral extraction under the specific mining and geological conditions. In turn, the abovementioned will help reduce the risk of accidence while providing scientifically substantiated approach to select quarrying sequence, techniques, and system.