Башкирский государственный аграрный университет, г. Уфа, Российская Федерация Реферат. Современные почвообрабатывающие машины и технологии возделывания сельскохозяйственных культур существенно влияют на механическую эрозию почвы на склоновых агроландшафтах. Под действием рабочих органов почвообрабатывающих и посевных машин почва систематически смещается под склон. (Цель исследования) Определить пути снижения механической эрозии почвы на склонах при возделывании зерновых и пропашных культур путем совершенствования технологии и технических средств. (Материалы и методы) Установили, что механическая эрозия почвы, возникающая при обработке склонов рабочими органами машин в виде трехгранного клина зависит от параметров рабочего органа, крутизны склона и направления движения агрегата относительно горизонтали поля. Механическая эрозия почвы на одном поле за сезон изменяется в зависимости от технологии возделывания культур, прежде всего от количества и глубины обработок. (Результаты и обсуждение) Показали, что переход от традиционных технологий возделывания зерновых и пропашных культур к почвозащитной, энергосберегающей технологии Strip-till снижает эрозию почвы, а при нулевой технологии возникновение механической эрозии исключено. Определили, что при возделывании зерновых культур на склонах 6 градусов механическая эрозия за сезон по нулевой технологии отсутствует, по энергосберегающей технологии не превышает 15 миллиметров, по почвозащитной технологии -35 миллиметров, а по традиционной -достигает 145 миллиметров. Отметили, что при возделывании кукурузы по традиционной технологии на склонах 6 градусов механическая эрозия почвы доходит до 87 миллиметров за сезон. Поэтому для сохранения почвы при возделывании кукурузы рассмотрели переход к технологии Strip-till. (Выводы) Для снижения механической эрозии почвы предложили переходить от традиционных технологий возделывания сельхозкультур на почвозащитные, энергосберегающие, нулевые технологии и технологии Strip-till. Ключевые слова: механическая эрозия почвы, крутизна склона, параметры рабочего органа, технология возделывания культур, направление движения.
The article is devoted to the development of a mathematical model of cultivation technological process on the slopes through the use of a deformable model of continuous Newtonian medium. We cited some results of numerical implementation of the model for the duckfoot cultivator, plow body and disk working unit.
The work is devoted to the mathematical description of the process of occurrence and flow of mechanical soil erosion on slope fields and ways to reduce it. The dependences of mechanical erosion on the steepness of the slope, the type and parameters of the working unit, the direction of movement of the unit relative to the horizontal field are given. The obtained mathematical dependences allow us to calculate the displacement of the soil down the slope, depending on the type and parameters of the working unit and on the technology of tillage used. Purpose of the study. Reduction of mechanical soil erosion in slope fields by improving technologies and structural and technological parameters of tillage and seeding machines. Calculations showed that when the unit moves at an angle θ = 45 ÷ 70° to the horizontal of the field, the maximum displacement of the soil occurs by the lower wing of the working body (Δ1). Minimal mechanical soil erosion is provided for lancet working bodies when the unit moves relative to the horizontal of the field at an angle of 90 ± 35°, for unilateral working bodies - 120 ± 40°. It is desirable to avoid the direction of movement of the unit θ ≈ 0 ... 70°, when maximum mechanical erosion is observed when processing by one-sided working bodies (plow bodies) exceeding mechanical erosion when moving along the field horizontals 1.5 times.
The article describes the process of destruction of soil lumps on sifting separators of potato harvesters, based on the theory of low-cycle fatigue strength, based on the position that the destruction occurs as a result of the presence of initial defects and consists in the nucleation and development of cracks present in the body. A probabilistic model of reducing to “pass-through” sizes of large soil particles is considered, considering not only their destructive, but also hardening effect of cyclic loads of sifting separators, as well as the effect of areas of load application to the lump on the intensity of the destruction process and the purity of the heap. The conclusion was obtained that it is possible to increase the efficiency of the process of destruction of soil particles when using vibration effects. A design is proposed and the optimal parameters of a vibration separator with a reflector are determined.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.