No abstract

In the present investigation, thermo-reversible bonds formed between maleimide and furan groups (Diels–Alder (DA)-based bis-maleimides (BMI)) have been generated to enable high-performance unidirectional (UD) carbon fiber-reinforced plastics (CFRPs) with self-healing (SH) functionality. The incorporation of the SH agent (SHA) was performed locally, only in areas of interest, with the solution electrospinning process (SEP) technique. More precisely, reference and modified CFRPs with (a) pure SHA, (b) SHA modified with multi-walled carbon nano-tubes (MWCNTs) and (c) SHA modified with graphene nano-platelets (GNPs) were fabricated and further tested under Mode I loading conditions. According to experimental results, it was shown that the interlaminar fracture toughness properties of modified CFRPs were considerably enhanced, with GNP-modified ones to exhibit the best toughening performance. After the first fracture and the activation of the healing process, C-scan inspections revealed, macroscopically, a healing efficiency (H.E.) of 100%; however, after repeating the tests, a low recovery of mechanical properties was achieved. Finally, optical microscopy (OM) examinations not only showed that the epoxy matrix at the interface was partly infiltrated by the DA resin, but it also revealed the presence of pulled-out fibers at the fractured surfaces, indicating extended fiber bridging between crack flanks due to the presence of the SHA.

The objective of the present study is the assessment of the impact performance and the concluded thermal conductivity of epoxy resin reinforced by layered Graphene Nano-Platelets (GNPs). The two types of used GNPs have different average thicknesses, <4 nm for Type 1 and 9–12 nm for Type 2. Graphene-based polymers containing different GNP loading contents (0.5, 1, 5, 10, 15 wt.%) were developed by using the three-roll mill technique. Thermo-mechanical (Tg), impact tests and thermal conductivity measurements were performed to evaluate the effect of GNPs content and type on the final properties of nano-reinforced polymers. According to the results, thinner GNPs were proven to be more promising in all studied properties when compared to thicker GNPs of the same weight content. More specifically, the glass transition temperature of nano-reinforced polymers remained almost unaffected by the GNPs inclusion. Regarding the impact tests, it was found that the impact resistance of the doped materials increased up to 50% when 0.5 wt.% Type 1 GNPs were incorporated within the polymer. Finally, the thermal conductivity of doped polymers with 15 wt.% GNPs showed a 130% enhancement over the reference material.

In the current study, a novel approach in terms of the incorporation of self-healing agent (SHA) into unidirectional (UD) carbon fiber reinforced plastics (CFRPs) has been demonstrated. More precisely, Diels–Alder (DA) mechanism-based resin (Bis-maleimide type) containing or not four layered graphene nanoplatelets (GNPs) at the amount of 1 wt% was integrated locally in the mid-thickness area of CFRPs by melt electro-writing process (MEP). Based on that, CFRPs containing or not SHA were fabricated and further tested under Mode I interlaminar fracture toughness experiments. According to experimental results, modified CFRPs exhibited a considerable enhancement in the interlaminar fracture toughness properties (peak load (Pmax) and fracture toughness energy I (GIC) values). After Mode I interlaminar fracture toughness testing, the damaged samples followed the healing process and then were tested again under identical experimental conditions. The repeating of the tests revealed moderate healing efficiency (H.E.) since part of the interlaminar fracture toughness properties were restored. Furthermore, three-point bending (3PB) experiments were conducted, with the aim of assessing the effect of the incorporated SHA on the in-plane mechanical properties of the final CFRPs. Finally, optical microscopy (OM) examinations were performed to investigate the activated/involved damage mechanisms.

No abstract