Soft ionic conductors, such as hydrogels and ionogels, have enabled stretchable and transparent ionotronics, but they suffer from key limitations inherent to the liquid components, which may leak and evaporate. Here, novel liquid‐free ionic conductive elastomers (ICE) that are copolymer networks hosting lithium cations and associated anions via lithium bonds and hydrogen bonds are demonstrated, such that they are intrinsically immune from leakage and evaporation. The ICEs show extraordinary mechanical versatility including excellent stretchability, high strength and toughness, self‐healing, quick self‐recovery, and 3D‐printability. More intriguingly, the ICEs can defeat the conflict of strength versus toughness—a compromise well recognized in mechanics and material science—and simultaneously overcome the conflict between ionic conductivity and mechanical properties, which is common for ionogels. Several liquid‐free ionotronics based on the ICE are further developed, including resistive force sensors, multifunctional ionic skins, and triboelectric nanogenerators (TENGs), which are not subject to limitations of previous gel‐based devices, such as leakage, evaporation, and weak hydrogel–elastomer interfaces. Also, the 3D printability of the ICEs is demonstrated by printing a series of structures with fine features. The findings offer promise for a variety of ionotronics requiring environmental stability and durability.

As one of the most promising drug delivery carriers, hydrogels have received considerable attention in recent years. Many previous efforts have focused on diffusion-controlled release, which allows hydrogels to load and release drugs in vitro and/or in vivo. However, it hardly applies to lipophilic drug delivery due to their poor compatibility with hydrogels. Herein, we propose a novel method for lipophilic drug release based on a dual pH-responsive hydrogel actuator. Specifically, the drug is encapsulated and can be released by a dual pH-controlled capsule switch. Inspired by the deformation mechanism of Drosera leaves, we fabricate the capsule switch with a double-layer structure that is made of two kinds of pH-responsive hydrogels. Two layers are covalently bonded together through silane coupling agents. They can bend collaboratively in a basic or acidic environment to achieve the “turn on” motion of the capsule switch. By incorporating an array of parallel elastomer stripes on one side of the hydrogel bilayer, various motions (e.g., bending, twisting, and rolling) of the hydrogel bilayer actuator were achieved. We conducted an in vitro lipophilic drug release test. The feasibility of this new drug release method is verified. We believe this dual pH-responsive actuator-controlled drug release method may shed light on the possibilities of various drug delivery systems.

Stretchable ionic conductors such as hydrogels and ionic‐liquid‐based gels (aka ionogels) have garnered great attention as they enable the development of soft ionotronics. Notably, soft ionotronic devices inevitably operate in humid environments or under mechanical loads. However, many previously reported hydrogels and ionogels, however, are unstable in environments with varying humidity levels owing to hydrophilicity, and their liquid components (i.e., ionic liquid, water) may leak easily from polymer matrices under mechanical loads, causing deterioration of device performance. This work presents novel hydrophobic ionogels with strong ionic liquid retention capability. The ionogels are ambiently and mechanically stable, capable of not absorbing moisture in environments with high relative humidity and almost not losing liquid components during long periods of mechanical loading. Moreover, the ionogels exhibit desirable conductivity (10−4–10−5 S cm−1), large rupturing strain (>2000%), moderate fractocohesive length (0.51–1.03 mm), and wide working temperature range (−60 to 200 °C). An ionic skin is further designed by integrating the concept of sensory artificial skins and triboelectric nanogenerators, which can convert multiple stimuli into various types of signals, including resistance, capacitance, short‐circuit current, and open‐circuit voltage. This work may open new avenues for the development of soft ionotronics with stable performance.

Hydrogen bond engineering is widely exploited to impart stretchability, toughness, and self-healing capability to hydrogels. However, the enhancement effect of conventional hydrogen bonds is severely limited by their weak interaction strength. In nature, some organisms tolerate extreme conditions due to the strong hydrogen bond interactions induced by trehalose. Here, we report a trehalose network–repairing strategy achieved by the covalent-like hydrogen bonding interactions to improve the hydrogels’ mechanical properties while simultaneously enabling them to tolerate extreme environmental conditions and retain synthetic simplicity, which proves to be useful for various kinds of hydrogels. The mechanical properties of trehalose-modified hydrogels including strength, stretchability, and fracture toughness are substantially enhanced under a wide range of temperatures. After dehydration, the modified hydrogels maintain their hyperelasticity and functions, while the unmodified hydrogels collapse. This strategy provides a versatile methodology for synthesizing extremotolerant, highly stretchable, and tough hydrogels, which expand their potential applications to various conditions.

Soft display has been intensively studied in recent years in the wake of rapid development of a variety of soft materials. The currently existing solutions for translating the traditional hard display into the more convenient soft display mainly include light-emitting diodes, liquid crystals, quantum dots, and phosphors. The desired soft display should take the advantages of facile fabrication processes and cheap raw materials. Besides, the device should be colorful, nontoxic, and not only flexible but also stretchable. However, the foregoing devices may not own all of the desired features. Here, a new type of soft display, which consists of dielectric elastomer and photonic crystals that cover all of the features mentioned above and can achieve the color change dynamically and in situ, is reported. In addition to the above features, the angle-dependent characteristic and the excellent mechanical reliability make it a great candidate for the next generation of soft display. Finally, the vast applications of the present concept in a variety of fields are also prospected.