Various fundamental-physics experiments such as measurement of the birefringence of the vacuum, searches for ultralight dark matter (e.g., axions), and precision spectroscopy of complex systems (including exotic atoms containing antimatter constituents) are enabled by high-field magnets. We give an overview of current and future experiments and discuss the state-of-the-art DCand pulsed-magnet technologies and prospects for future developments. * Electronic address: budker@uni-mainz.de †

We demonstrate quantum Hall resistance measurements with metrological accuracy in a small cryogen-free system operating at a temperature of around 3.8 K and magnetic fields below 5 T. Operating this system requires little experimental knowledge or laboratory infrastructure, thereby greatly advancing the proliferation of primary quantum standards for precision electrical metrology. This significant advance in technology has come about as a result of the unique properties of epitaxial graphene on SiC.

Mouse oviducts synthesized maximal PGI2 during day 2-3 p.c., coinciding with the transformation of 2-cell embryos to morulae. The results suggest that oviduct-derived PGI2 may enhance embryo development in a paracrine fashion.

Index Terms-Bi-2212, high field magnet, high temperature superconductor, quench.

No abstract

The superconducting proximity effect in graphene can be used to create Josephson junctions with critical currents that can be tuned using local field-effect gates. These junctions have the potential to add functionality to existing technologies; for example, superconducting quantum interference device (SQUID) magnetometers with adaptive dynamic range and superconducting qubits with fast electrical control. Here, we present measurements of graphene-based superconducting quantum interference devices incorporating ballistic Josephson junctions that can be controlled individually. We investigate the magnetic field response of the SQUIDs as the junctions are gated and as the device is tuned between symmetric and asymmetric configurations. We find a highest transfer function ≈ 300 μV/Φ0, which compares favorably with conventional, low temperature DC SQUIDs. With low noise readout electronics and optimised geometries, devices based on ballistic graphene Josephson junctions have the potential to match the sensitivity of traditional SQUIDs while also providing additional functionality.

Advances in high field magnets are driven primarily by the availability of high current density conductors. The restack rod process (RRP), internal Sn superconductors have achieved engineering current densities nearly five times that of bronze route Nb 3 Sn conductors at high fields. Careful utilization of this low temperature superconductor (LTS) enables the production of magnets beyond the previous benchmark of 21 Tesla without an associated increase in magnet and cryostat volume. Steps to realize extremely compact high field magnets for a variety of applications are described. The next significant challenge is to produce magnetic fields beyond 25 Tesla solely using superconducting solenoids. High temperature superconductors (HTS) will be required and, to this end, Bi-2212/Ag matrix wires are at an advanced stage of development. The tangible objective is a new generation of compact, ultra-high field magnets.Index Terms-Rod process wire, superconducting magnet.

No abstract