Field decay rate is the key characteristic of superconducting magnets based on closed-loop coils. However, in Maglev trains or rotating machines, closed-loop magnets work in external AC fields and will exhibit an evidently accelerated field decay resulting from dynamic resistances, which are usually much larger than joint resistance. Nevertheless, there has not been a numerical model capable of systematically studying this behaviour, which is the main topic of this work. The field decay curves of a closed-loop high-temperature-superconducting (HTS) coil in various AC fields are simulated based on H-formulation. A non-uniform external field generated by armature coils is considered. Reasonable consistence is found between experimental and simulation results. In our numerical model, the impact of current relaxation, which is a historical challenge, is analysed and subsequently eliminated with acceptable precision. Our simulation results suggest that most proportion of the field decay rate is from the innermost and outermost turns. Based on this observation, a magnetic shielding pattern is designed to reduce the field decay rate efficiently. This work has provided magnet designers with an effective method to predict the field decay rate of closed-loop HTS coils in external AC fields, and explore various shielding designs.

No abstract

Dynamic resistance leads to the demagnetization of high-T c superconducting (HTS) permanent magnets (such as closed-loop coils and tape stacks) when exposed to AC fields. This letter reports on the systematic study of an unexpected dynamic resistance occurring in first cycle AC field, which can be induced by any weak AC field-even below the threshold value 'conventionally' defined for generating dynamic resistance. This resistance is predicted by a critical-state analytical calculation, and its physical origin is shown to be from the asymmetrical flux penetration. Numerically, this resistance is verified, and simulated for a closed-loop HTS coil, showing a non-negligible demagnetization effect. Experimentally, the current decay (i.e. demagnetization) characteristics of a closed-loop HTS coil in a sufficient range of AC fields are measured. This resistance manifests itself in the closed-loop coil as a relatively sharp current decay in the first cycle of the applied field; this observation is in qualitative agreement with the simulation. A comparative experiment is performed to eliminate the contribution from the index loss or 'conventional' dynamic resistance that also possibly results in a greater demagnetization in the first cycle owing to the larger coil current. As the result, this unexpected dynamic resistance is verified. The unexpected, sharp demagnetization caused by this resistance might need to be considered when designing HTS closed-loop coil applications.

This work focuses on the coupling effect of molecular chain displacement and trap characteristics on direct current (DC) breakdown properties of high density/low density polyethylene (HDPE/LDPE) blend insulation. Frequency domain spectroscopy (FDS) and isothermal discharge current (IDC) are used to characterize the dielectric relaxation and trap characteristics of HDPE/LDPE blends. A DC breakdown model is proposed to reveal the mechanisms of the molecular chain displacement and carrier trap on the DC breakdown strength. The dielectric relaxation α and δ present segmental motions and thermal ion polarization behaviours of HDPE/LDPE blends, respectively. α dielectric relaxation strength (Δεα) increases as the amount of HDPE increases from 0 to 5 wt%, and then declines with a further increase of HDPE content to 20 wt%. According to the velocity equation, the increase of Δεα will increase the molecular chain displacement, resulting in a larger free volume, which will provide electrons with larger free path λ to form hot electrons. A positive correlation exists between the activation energy of the dielectric relaxation process δ and trap density, and the increase of δ dielectric relaxation strength (Δεδ) will adversely affect the breakdown strength of the specimen. HDPE/LDPE blends with 15 wt% HDPE content have lower Δεα and lowest Δεδ, which decreases the mean free path λ of molecular chain and thermal ion polarization. At the same time, it has the highest deep trap density, thus increasing the probability of hot electrons being captured and improving the DC breakdown strength. It is concluded the breakdown of the dielectric is synergistically affected by the molecular chain displacement and carrier trap.

Insulation coating is a sought after technique for REBa2Cu3O6+x (REBCO) based high temperature superconducting tapes in practical applications. In this work, we developed a novel technique for preparing ultra-thin and fully surrounded insulation coatings on REBCO tapes. This technique completely eliminates the risk of critical current degradation in REBCO tapes induced by high temperature curing, without sacrificing the mechanical performance and the engineering current density. We adopted CRC-PLASTICOTE-70 as insulation precursor and verified its performance as insulation coating at 77 K. Thickness effect of the insulation coating in liquid nitrogen was investigated in details. Ultra-thin coating (below 5 μm) on REBCO tapes exhibited excellent strength during thermal shock test, while good adhesion of Classification 1 was achieved (according to ISO2409-1992). A charge-discharge test was carried out on a test coil wound from as-coated tapes to assess the turn-to-turn insulation performance. The results show that a high turn-to-turn resistivity of 1060 μΩ•cm2 is achieved by the insulation coating, which is about two orders of magnitude higher than that of its un-coated counterpart, indicating excellent insulation properties. This work provides a new idea for the development of novel insulation technology for REBCO tapes in practical applications.

No abstract

No abstract

A high-temperature superconducting no-insulation (NI) coil, with its self-protection property, high engineering current density and unique demagnetization property, becomes a potential candidate for an electrodynamic suspension (EDS) system. Compared with the applications in high field magnets, the NI coil used in the EDS system is considered as working in a dynamic state, the magnetization loss generated in the NI coil is essential for the design of a cryogenic system. This paper presents the study on AC magnetization loss of NI coils by both numerical and experimental methods. Firstly, a 3D finite element numerical model representing the full geometry of the NI coil is built to analyse the effect of field frequency, field magnitude, as well as the radial characteristic resistance. Then, systematic discussions are conducted to figure out the working mechanism of NI coils. Finally, a calibration-free method testing platform is installed to validate the numerical model, and a modified model is proposed to represent the non-uniform radial characteristic resistance caused by stress distribution. The conclusions of this paper will be used in the future optimization of NI coils and the cryogenic design of the EDS system.