Nanopores that exhibit ionic current rectification (ICR) behave like diodes, such that they transport ions more efficiently in one direction than the other. Conical nanopores have been shown to rectify ionic current, but only those with at least 500 nm in length exhibit significant ICR. Here, through the finite element method, we show how ICR of conical nanopores with length below 200 nm can be tuned by controlling individual charged surfaces i.e. inner pore surface (surface inner), and exterior pore surfaces on the tip and base side (surface tip and surface base). The charged surface inner and surface tip can induce obvious ICR individually, while the effects of the charged surface base on ICR can be ignored. The fully charged surface inner alone could render the nanopore counterion-selective and induces significant ion concentration polarization in the tip region, which causes reverse ICR compared to nanopores with all surface charged. In addition, the direction and degree of rectification can be further tuned by the depth of the charged surface inner. When considering the exterior membrane surface only, the charged surface tip causes intra-pore ionic enrichment and depletion under opposite biases which results in significant ICR. Its effective region is within ~40 nm beyond the tip orifice. We also found that individual charged parts of the pore system contributed to ICR in an additive way due to the additive effect on the ion concentration regulation along the pore axis. With various combinations of fully/partially charged surface inner and surface tip , diverse ICR ratios from ~2 to ~170 can be achieved. Our findings shed light on the mechanism of ionic current rectification in ultra-short conical nanopores, and provide a useful guide to the design and modification of ultra-short conical nanopores in ionic circuits and nanofluidic sensors.

No abstract

Ion transport through nanopores is an important process in nature and has important engineering applications. To date, most studies of nanopore ion transport have been carried out with electrolytes of relatively low concentrations. In this paper, we report on ionic current modulation from the translocation of dsDNA through a nanopore under high ionic strength and with an electrolyte concentration gradient across the nanopore. Results show that in this case, DNA translocation can induce either negative or positive ionic current modulation, even though usually only downward peaks are expected under this high ion concentration. Through a series of experiments and numerical simulations with nanopores of different diameters and concentration gradients, it is found that the positive pulse is due to extra ions outside the electric double layer of the DNA that are brought into the nanopore by the enhanced electroosmotic flow (EOF) with the negatively charged DNA inside the nanopore.

In recent years, oil–water separation has been widely researched to reduce the influences of industrial wastewater and offshore oil spills. A filter membrane with special wettability can achieve the separation because of its opposite wettability for water phase and oil phase. In the field of filter membrane with special wettability, porous metal filter membranes have been much investigated because of the associated high efficiency, portability, high plasticity, high thermal stability, and low cost. This article provides an overview of the research progress of the porous metal filter membrane fabrication and discusses the future developments in this field.

Solid-state nanopore has captured the attention of many researchers due to its characteristic of nanoscale. Now, different fabrication methods have been reported, which can be summarized into two broad categories: “top-down” etching technology and “bottom-up” shrinkage technology. Ion track etching method, mask etching method chemical solution etching method, and high-energy particle etching and shrinkage method are exhibited in this report. Besides, we also discussed applications of solid-state nanopore fabrication technology in DNA sequencing, protein detection, and energy conversion.