An all-in-one paper-based analytical device (PAD) was successfully developed for visual fluorescence detection of carcinoembryonic antigen (CEA) on CdTe/CdSe quantum dot (QD)-enzyme-impregnated paper by coupling with a bioresponsive controlled-release system from DNA-gated mesoporous silica nanocontainers (MSNs). The assay was carried out in a centrifuge tube by using glucose-loaded MSNs with a CEA aptamer and a QD-enzyme-paper attached on the lid. Initially, single-strand complementary DNA to a CEA aptamer was covalently conjugated to the aminated MSN, and then glucose (enzyme substrate) molecules were gated into the pore with the help of the aptamer. Glucose oxidase (GOD) and CdTe/CdSe QDs were coimmobilized on paper for the visual fluorescence signal output. Upon target CEA introduction in the detection cell, the analyte specifically reacted with the immobilized aptamer on the MSN to open the pore, thereby resulting in the glucose release. The released glucose was oxidized by the immobilized GOD on paper to produce gluconic acid and hydrogen peroxide, and the latter quenched the fluorescence of CdTe/CdSe QDs, which could be determined by the naked eye on a portable smartphone and a commercial fluorospectrometer. Under optimal conditions, the PAD-based sensing system enabled sensitive discrimination of target CEA against other biomarkers or proteins in a linear range of 0.05-20 ng mL with a limit of detection of 6.7 pg mL (ppt). In addition, our strategy displayed high specificity, good reproducibility, and acceptable accuracy for analyzing human serum specimens with a commercial human CEA ELISA kit. Importantly, this methodology offers promise for simple analysis of biological samples and is suitable for use in the mass production of miniaturized devices, thus opening new opportunities for protein diagnostics and biosecurity.

Titanium dioxide (TiO; as a potential photosensitizer) has good photocurrent performance and chemical stability but often exhibits low utilization efficiency under ultraviolet (UV) region excitation. Herein, we devised a near-infrared light-to-UV light-mediated photoelectrochemical (PEC) aptasensing platform for the sensitive detection of carcinoembryonic antigen (CEA) based on core-shell NaYF:Yb,Tm@TiO upconversion microrods by coupling with target-triggered rolling circle amplification (RCA). The upconversion microrods synthesized through the hydrothermal reaction could act as a photosensing platform to convert the near-infrared (near-IR) excitation into UV emission for generation of photoinduced electrons. The target analyte was determined on a functional magnetic bead by using the corresponding aptamers with a sandwich-type assay format. Upon target CEA introduction, a complex was first formed between capture aptamer-1-conjugated magnetic bead (Apt1-MB) and aptamer-2-primer DNA (Apt2-pDNA). Thereafter, the carried primer DNA by the aptamer-2 paired with linear padlock DNA to trigger the RCA reaction. The guanine (G)-rich product by RCA reaction was cleaved by exonuclease I and exonuclease III (Exos I/III), thereby resulting in the formation of numerous individual guanine bases to enhance the photocurrent of core-shell NaYF:Yb,Tm@TiO upconversion microrods under near-IR illumination (980 nm). Under optimal conditions, the near-IR light-mediated PEC aptasensing system could exhibit good photoelectrochemical response toward target CEA and allowed for the detection of target CEA as low as 3.6 pg mL. High reproducibility and good accuracy were achieved for analysis of human serum specimens. Importantly, the near-IR-activated PEC aptasensing scheme provides a promising platform for ultrasensitive detection of other biomolecules.

A near-infrared light-activated ratiometric photoelectrochemical aptasensor was fabricated for detection of carcinoembryonic antigen (CEA) coupling with upconversion nanoparticles (UCNPs)-semiconductor nanocrystals-based spatial-resolved technique on a homemade 3D printing device in which a self-regulating integrated electrode was designed for dual signal readout. The as-prepared NaYF4:Yb,Er UCNPs@CdTe nanocrystals were initially assembled on two adjacent photoelectrodes, then CEA aptamer 1 (A1) and capture DNA (CA) were modified onto two working photoelectrodes (WP1 and WP2) through covalent binding, respectively, and then gold nanoparticle-labeled CEA aptamer 2 (Au NP-A2) was immobilized on the surface of functional WP2 for the formation of double-stranded DNA. Upon target CEA introduction, the various concentrations of CEA were captured on the WP1, whereas the binding of the CEA with Au NP-A2 could be released from the WP2 thanks to the highly affinity of CEA toward A2. The dual signal readout with the “signal-off” of WP1 and “signal-on” of WP2 were employed for the spatial-resolved PEC (SR-PEC) strategy to detect CEA as an analytical model. Combining NaYF4:Yb,Er UCNPs@CdTe nanocrystals with spatial-resolved model on 3D printing device, the PEC ratiometric aptasensor based on steric hindrance effect and exciton–plasmon interactions (EPI) exhibited a linear range from 10.0 pg mL–1 to 5.0 ng mL–1 with a limit of detection of 4.8 pg mL–1 under 980 nm illumination. The SR-PEC ratiometric strategy showed acceptable stability and reproducibility with a superior anti-interference ability. This approach can provide the guidance for the design of ratiometric, multiplexed, and point-of-care biosensors.

This work demonstrates that the photoelectric response of defect-engineered TiO modified with Au nanoparticles can be modulated by oxygen vacancy concentration and excitation wavelength. When strongly plasmonic Au nanoparticles are anchored to defect-engineered TiO by DNA hybridization, several times plasmonic enhancement of photocurrent occurs under 585 nm excitation, and it is employed as a novel signaling mode for developing an improved photoelectrochemical sensing platform. This signaling mode combined with exonuclease III-assisted target recycling amplification exhibits excellent analytical performance, which provides a novel photoelectrochemical detection protocol.

Herein a novel split-type photoelectrochemical (PEC) immunosensing platform was designed for sensitive detection of low-abundance biomarkers (prostate-specific antigen, PSA, used in this case) by coupling a peroxyoxalate chemiluminescence (PO-CL) self-illuminated system with digital multimeter (DMM) readout. The PEC detection device consisted of a capacitor/DMM-joined electronic circuit and a PO-CL-based self-illuminated cell. Initially, reduced graphene oxide-doped BiVO4 (BiVO4-rGO) photovoltaic materials with good photoelectric properties was integrated into the capacitor/DMM-joined circuit for photocurrent generation in the presence of hydrogen peroxide (H2O2, as the hole-trapping reagent). A sandwich-type immunoreaction with target PSA was carried out in capture antibody-coated microplates by using glucose oxidase/detection antibody-conjugating gold nanoparticle (pAb2-AuNP-GOx). Accompanying the sandwiched immunocomplex, the labeled GOx could oxidize glucose to produce H2O2. The as-generated H2O2 could act as the coreaction reagent to trigger the chemiluminescence of the peroxyoxalate system and the PEC reaction of the BiVO4-rGO. Meanwhile, the self-illuminated light could induce photovoltaic material (BiVO4-rGO) to produce a voltage that was utilized to charge an external capacitor. With the switch closed, the capacitor could discharge through the DMM and provide an instantaneous current. Different from conventional PEC immunoassays, the as-generated photoelectron was stored in the capacitor and released instantaneously to amplify the photocurrent. Under the optimal conditions, the transient current increased with the increasing target PSA concentration in the dynamic working range from 10 pg mL(-1) to 80 ng mL(-1) with a detection limit (LOD) of 3 pg mL(-1). This work demonstrated for the first time that the peroxyoxalate CL system could be used as a suitable substitute of physical light source to apply in PEC immunoassay. In addition, this methodology afforded good reproducibility, precision, and high specificity, and the method accuracy matched well with the commercial PSA ELISA kit. Importantly, the developed split-type photoelectrochemical immunoassay could not only avoid the interfering of the biomolecules relative to the photovoltaic materials but also eliminate the need of an exciting light source and expensive instrumentation, thus representing a user-friendly and low-cost assay protocol for practical utilization in quantitative low-abundance proteins.