An all-in-one paper-based analytical device (PAD) was successfully developed for visual fluorescence detection of carcinoembryonic antigen (CEA) on CdTe/CdSe quantum dot (QD)-enzyme-impregnated paper by coupling with a bioresponsive controlled-release system from DNA-gated mesoporous silica nanocontainers (MSNs). The assay was carried out in a centrifuge tube by using glucose-loaded MSNs with a CEA aptamer and a QD-enzyme-paper attached on the lid. Initially, single-strand complementary DNA to a CEA aptamer was covalently conjugated to the aminated MSN, and then glucose (enzyme substrate) molecules were gated into the pore with the help of the aptamer. Glucose oxidase (GOD) and CdTe/CdSe QDs were coimmobilized on paper for the visual fluorescence signal output. Upon target CEA introduction in the detection cell, the analyte specifically reacted with the immobilized aptamer on the MSN to open the pore, thereby resulting in the glucose release. The released glucose was oxidized by the immobilized GOD on paper to produce gluconic acid and hydrogen peroxide, and the latter quenched the fluorescence of CdTe/CdSe QDs, which could be determined by the naked eye on a portable smartphone and a commercial fluorospectrometer. Under optimal conditions, the PAD-based sensing system enabled sensitive discrimination of target CEA against other biomarkers or proteins in a linear range of 0.05-20 ng mL with a limit of detection of 6.7 pg mL (ppt). In addition, our strategy displayed high specificity, good reproducibility, and acceptable accuracy for analyzing human serum specimens with a commercial human CEA ELISA kit. Importantly, this methodology offers promise for simple analysis of biological samples and is suitable for use in the mass production of miniaturized devices, thus opening new opportunities for protein diagnostics and biosecurity.
Titanium dioxide (TiO; as a potential photosensitizer) has good photocurrent performance and chemical stability but often exhibits low utilization efficiency under ultraviolet (UV) region excitation. Herein, we devised a near-infrared light-to-UV light-mediated photoelectrochemical (PEC) aptasensing platform for the sensitive detection of carcinoembryonic antigen (CEA) based on core-shell NaYF:Yb,Tm@TiO upconversion microrods by coupling with target-triggered rolling circle amplification (RCA). The upconversion microrods synthesized through the hydrothermal reaction could act as a photosensing platform to convert the near-infrared (near-IR) excitation into UV emission for generation of photoinduced electrons. The target analyte was determined on a functional magnetic bead by using the corresponding aptamers with a sandwich-type assay format. Upon target CEA introduction, a complex was first formed between capture aptamer-1-conjugated magnetic bead (Apt1-MB) and aptamer-2-primer DNA (Apt2-pDNA). Thereafter, the carried primer DNA by the aptamer-2 paired with linear padlock DNA to trigger the RCA reaction. The guanine (G)-rich product by RCA reaction was cleaved by exonuclease I and exonuclease III (Exos I/III), thereby resulting in the formation of numerous individual guanine bases to enhance the photocurrent of core-shell NaYF:Yb,Tm@TiO upconversion microrods under near-IR illumination (980 nm). Under optimal conditions, the near-IR light-mediated PEC aptasensing system could exhibit good photoelectrochemical response toward target CEA and allowed for the detection of target CEA as low as 3.6 pg mL. High reproducibility and good accuracy were achieved for analysis of human serum specimens. Importantly, the near-IR-activated PEC aptasensing scheme provides a promising platform for ultrasensitive detection of other biomolecules.
Abnormal microenvironments (viscosity, polarity, pH, etc.) have been verified to be closely associated with numerous pathophysiological processes such as inflammation, neurodegenerative diseases, and cancer.
A near-infrared light-activated ratiometric photoelectrochemical aptasensor was fabricated for detection of carcinoembryonic antigen (CEA) coupling with upconversion nanoparticles (UCNPs)-semiconductor nanocrystals-based spatial-resolved technique on a homemade 3D printing device in which a self-regulating integrated electrode was designed for dual signal readout. The as-prepared NaYF4:Yb,Er UCNPs@CdTe nanocrystals were initially assembled on two adjacent photoelectrodes, then CEA aptamer 1 (A1) and capture DNA (CA) were modified onto two working photoelectrodes (WP1 and WP2) through covalent binding, respectively, and then gold nanoparticle-labeled CEA aptamer 2 (Au NP-A2) was immobilized on the surface of functional WP2 for the formation of double-stranded DNA. Upon target CEA introduction, the various concentrations of CEA were captured on the WP1, whereas the binding of the CEA with Au NP-A2 could be released from the WP2 thanks to the highly affinity of CEA toward A2. The dual signal readout with the “signal-off” of WP1 and “signal-on” of WP2 were employed for the spatial-resolved PEC (SR-PEC) strategy to detect CEA as an analytical model. Combining NaYF4:Yb,Er UCNPs@CdTe nanocrystals with spatial-resolved model on 3D printing device, the PEC ratiometric aptasensor based on steric hindrance effect and exciton–plasmon interactions (EPI) exhibited a linear range from 10.0 pg mL–1 to 5.0 ng mL–1 with a limit of detection of 4.8 pg mL–1 under 980 nm illumination. The SR-PEC ratiometric strategy showed acceptable stability and reproducibility with a superior anti-interference ability. This approach can provide the guidance for the design of ratiometric, multiplexed, and point-of-care biosensors.
Artificial muscles possess a vast potential in accelerating the development of robotics, exoskeletons, and prosthetics. Although a variety of emerging actuator technologies are reported, they suffer from several issues, such as high driving voltages, large hysteresis, and water intolerance. Here, a liquid metal artificial muscle (LMAM) is demonstrated, based on the electrochemically tunable interfacial tension of liquid metal to mimic the contraction and extension of muscles. The LMAM can work in different solutions with a wide range of pH (0–14), generating actuation strains of up to 87% at a maximum extension speed of 15 mm s−1. More importantly, the LMAM only needs a very low driving voltage of 0.5 V. The actuating components of the LMAM are completely built from liquids, which avoids mechanical fatigue and provides actuator linkages without mechanical constraints to movement. The LMAM is used for developing several proof‐of‐concept applications, including controlled displays, cargo deliveries, and reconfigurable optical reflectors. The simplicity, versatility, and efficiency of the LMAM are further demonstrated by using it to actuate the caudal fin of an untethered bionic robotic fish. The presented LMAM has the potential to extend the performance space of soft actuators for applications from engineering fields to biomedical applications.
As a newly developed technique, photoelectrochemical (PEC) immunoassays have attracted great attention in recent years because of their low cost and desirable sensitivity. Because the detection signal originates from the photoelectric conversion of photoelectric materials, the appearance and application of quantum dots (QDs), which possess unique photophysical properties and regulated optoelectronic characteristics, has taken the development of PEC immunoassays to new heights. This review concisely introduces the general mechanism of QDs-based photoelectric conversion for immunoassays and summarizes the current advances in QD applications in immunoassays. Given that signal strategies and photoactive materials are the key elements in PEC biosensor systems, we comprehensively highlight the state-of-the-art signaling strategies and various applications of QDs in PEC immunoassays to introduce advances in QDs-based PEC immunoassays. Finally, challenges and future developmental trends are briefly discussed.
This work demonstrates that the photoelectric response of defect-engineered TiO modified with Au nanoparticles can be modulated by oxygen vacancy concentration and excitation wavelength. When strongly plasmonic Au nanoparticles are anchored to defect-engineered TiO by DNA hybridization, several times plasmonic enhancement of photocurrent occurs under 585 nm excitation, and it is employed as a novel signaling mode for developing an improved photoelectrochemical sensing platform. This signaling mode combined with exonuclease III-assisted target recycling amplification exhibits excellent analytical performance, which provides a novel photoelectrochemical detection protocol.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.