Recent achievements in semiconductor surface‐enhanced Raman scattering (SERS) substrates have greatly expanded the application of SERS technique in various fields. However, exploring novel ultra‐sensitive semiconductor SERS materials is a high‐priority task. Here, a new semiconductor SERS‐active substrate, Ta 2 O 5 , is developed and an important strategy, the “coupled resonance” effect, is presented, to optimize the SERS performance of semiconductor materials by energy band engineering. The optimized Mo‐doped Ta 2 O 5 substrate exhibits a remarkable SERS sensitivity with an enhancement factor of 2.2 × 10 7 and a very low detection limit of 9 × 10 −9 m for methyl violet (MV) molecules, demonstrating one of the highest sensitivities among those reported for semiconductor SERS substrates. This remarkable enhancement can be attributed to the synergistic resonance enhancement of three components under 532 nm laser excitation: i) MV molecular resonance, ii) photoinduced charge transfer resonance between MV molecules and Ta 2 O 5 nanorods, and iii) electromagnetic enhancement around the “gap” and “tip” of anisotropic Ta 2 O 5 nanorods. Furthermore, it is discovered that the concomitant photoinduced degradation of the probed molecules in the time‐scale of SERS detection is a non‐negligible factor that limits the SERS performance of semiconductors with photocatalytic activity.

The current COVID-19 pandemic urges the extremely sensitive and prompt detection of SARS-CoV-2 virus. Here, we present a Human Angiotensin-converting-enzyme 2 (ACE2)-functionalized gold “virus traps” nanostructure as an extremely sensitive SERS biosensor, to selectively capture and rapidly detect S-protein expressed coronavirus, such as the current SARS-CoV-2 in the contaminated water, down to the single-virus level. Such a SERS sensor features extraordinary 106-fold virus enrichment originating from high-affinity of ACE2 with S protein as well as “virus-traps” composed of oblique gold nanoneedles, and 109-fold enhancement of Raman signals originating from multi-component SERS effects. Furthermore, the identification standard of virus signals is established by machine-learning and identification techniques, resulting in an especially low detection limit of 80 copies mL−1 for the simulated contaminated water by SARS-CoV-2 virus with complex circumstance as short as 5 min, which is of great significance for achieving real-time monitoring and early warning of coronavirus. Moreover, here-developed method can be used to establish the identification standard for future unknown coronavirus, and immediately enable extremely sensitive and rapid detection of novel virus.

Al2O3–YAG:Ce phosphor ceramic shows excellent luminescence, thermal performance, and thus great suitability for use in solid-state laser lighting.

Ultra‐high‐temperature ceramic composites of ZrB2 20 wt%SiC were pressureless sintered under an argon atmosphere. The starting ZrB2 powder was synthesized via the sol–gel method with a small crystallite size and a large specific surface area. Dry‐pressed compacts using 4 wt% Mo as a sintering aid can be pressureless sintered to ∼97.7% theoretical density at 2250°C for 2 h. Vickers hardness and fracture toughness of the sintered ceramic composites were 14.82±0.25 GPa and 5.39±0.13 MPa·m1/2, respectively. In addition to the good sinterability of the ZrB2 powders, X‐ray diffraction and scanning electron microscopy results showed that Mo formed a solid solution with ZrB2, which was believed to be beneficial for the densification process.

The current COVID-19 pandemic urges us to develop ultra-sensitive surface-enhanced Raman scattering (SERS) substrates to identify the infectiousness of SARS-CoV-2 virions in actual environments. Here, a micrometer-sized spherical SnS 2 structure with the hierarchical nanostructure of "nano-canyon” morphology was developed as semiconductor-based SERS substrate, and it exhibited an extremely low limit of detection of 10 −13 M for methylene blue, which is one of the highest sensitivities among the reported pure semiconductor-based SERS substrates. Such ultra-high SERS sensitivity originated from the synergistic enhancements of the molecular enrichment caused by capillary effect and the charge transfer chemical enhancement boosted by the lattice strain and sulfur vacancies. The novel two-step SERS diagnostic route based on the ultra-sensitive SnS 2 substrate was presented to diagnose the infectiousness of SARS-CoV-2 through the identification standard of SERS signals for SARS-CoV-2 S protein and RNA, which could accurately identify non-infectious lysed SARS-CoV-2 virions in actual environments, whereas the current PCR methods cannot.

No abstract

Hierarchical branched nanoparticles are one promising nanostructure with three-dimensional open porous structure composed of integrated branches for superior catalysis. We have successfully synthesized Pt-Cu hierarchical branched nanoparticles (HBNDs) with small size of about 30 nm and composed of integrated ultrathin branches by using a modified polyol process with introduction of poly(vinylpyrrolidone) and HCl. This strategy is expected to be a general strategy to prepare various metallic nanostructures for catalysis. Because of the special open porous structure, the as-prepared Pt-Cu HBNDs exhibit greatly enhanced specific activity toward the methanol oxidation reaction as much as 2.5 and 1.7 times compared with that of the commercial Pt-Ru and Pt-Ru/C catalysts, respectively. Therefore, they are potentially applicable as electrocatalysts for direct methanol fuel cells.

Surface-enhanced Raman scattering (SERS) has attracted great interest due to its remarkable enhancement, excellent sensitivity, and the "fingerprinting" ability to produce distinct spectra for detecting various molecules. Noble metal nanomaterials have usually been employed as SERS-active substrates because of their strong SERS enhancement originated from their unique surface plasmon resonance (SPR) properties. Because the SPR property depends on metal material's size, shape, morphology, arrangement, and dielectric environment around metal nanostructures, the key to wider applications of SERS technique is to develop plasmon-resonant structures with novel geometries to enhance Raman signals and to control the periodic ordering of these structures over a large area to obtain reproducible Raman enhancement. This review presents a general view on the theory background of SERS effect and several basic concepts and focuses on recent progress in engineering metallic nanostructures with various morphologies using versatile methods for improving SERS properties. Their potential applications in the field of chemical detection and biological sensing are overviewed.