Three-dimensional (3D) laser nanoprinting allows maskless manufacturing of diverse nanostructures with nanoscale resolution. However, 3D manufacturing of inorganic nanostructures typically requires nanomaterial-polymer composites and is limited by a photopolymerization mechanism, resulting in a reduction of material purity and degradation of intrinsic properties. We developed a polymerization-independent, laser direct writing technique called photoexcitation-induced chemical bonding. Without any additives, the holes excited inside semiconductor quantum dots are transferred to the nanocrystal surface and improve their chemical reactivity, leading to interparticle chemical bonding. As a proof of concept, we printed arbitrary 3D quantum dot architectures at a resolution beyond the diffraction limit. Our strategy will enable the manufacturing of free-form quantum dot optoelectronic devices such as light-emitting devices or photodetectors.

Abstract3D laser nanoprinting represents a revolutionary manufacturing approach as it allows maskless fabrication of 3D nanostructures at a resolution beyond the optical diffraction limit. Specifically, it endows the printed structures novel physical, chemical, or mechanical properties not observed at macroscopic scale. However, 3D laser nanoprinting typically relies on the photopolymerization process, indicating its limitation on the printable materials and functionalities. The capability to print diverse functional materials beyond polymer will enable a lot of new device applications in nanophotonics, microelectronics, and so on. One of the strategies is to use the 3D‐printed polymer structures as skeletons for functional material deposition, while another is to mix the functional components with the photocurable molecules and print the nanocomposites. More recently, several laser nanoprinting techniques beyond photopolymerization are also developed. In this review, the cutting‐edge technical innovation is summarized and a couple of examples are highlighted showing exciting applications of the printed structures in magnetic microrobots, photonics, and optoelectronics. Finally, the vision for existing challenges and future development in this field is shared.