Inspired by crystalline lenses in human eyes, liquid lenses have a simple yet elegant working principle, and result in compact optical systems. Recent numerical studies showed that membranes with variable thicknesses could affect the lens profile. However, fabrication and assembly of a liquid lens with an inhomogeneous membrane is difficult. There is also a lack of experimental studies about the changes of a lens profile during deformation. In this paper, we provided a new experimental approach for characterizing the performance of a liquid lens with an inhomogeneous membrane. A 2D axisymmetric lens model was built in finite element analysis software to theoretically study the non-linear deformation behavior of the inhomogeneous membrane. Then we provided a new approach to fabricate inhomogeneous membranes using a pre-machined aluminum mold. An optical coherence tomography (OCT) system was used to dynamically measure the changes of a lens profile without contact. Both simulation and the experiments indicated that the variation of the thickness of the membrane could affect the lens profile in a predictable manner. A negative conic constant was achieved when a plano-concave membrane was adopted in a liquid lens. Larger increments of the thickness of the membrane in the radial direction resulted in a larger contribution of a conic constant to the lens profile. The presented study offers guidance for image-quality analysis and optimization of a liquid-lens-based optical system.
To improve the understanding how aluminum contributes in non‐ideal explosive mixtures, cast‐cured formulations were analyzed in a series of electrical conductivity experiments. Five types of TNT‐based aluminized explosives, with aluminum mass fractions from 0 % to 20 % were considered in this study. The electrical conductivity of the detonation products in aluminized explosives was measured using an improved conductivity measurement method. The conductivity measurement results show that the detonation process of TNT‐based aluminized explosives can be divided into two stages: the first stage is the detonation reaction of TNT, and the second stage is the combustion reaction of aluminum with the detonation products. In the first stage, the duration of the TNT detonation increases with increased aluminum content; examination of the peak conductivities of the explosives with various aluminum contents indicated that a higher aluminum content is associated with a lower peak conductivity. Additionally, the ignition time of Al in the second stage is also determined. This work not only presents a means for studying the detonation process of aluminized explosives at 0–2.21 μs, but it also verified the relationship between the aluminum content and electrical conductivity in detonation products.
Here a liquid crystal polymer (LCP) was introduced into a PEEK/CF system as a new solution to simultaneously promote processing and mechanical performance of PEEK/CF and other polymer-based composites.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.