The first bionic membrane sensor based on triboelectrification is reported for self-powered physiological and behavioral measurements such as local internal body pressures for non-invasive human health assessment. The sensor can also be for self-powered anti-interference throat voice recording and recognition, as well as high-accuracy multimodal biometric authentication, thus potentially expanding the scope of applications in self-powered wearable medical/health monitoring, interactive input/control devices as well as accurate, reliable, and less intrusive biometric authentication systems.
With 70% of the earth's surface covered with water, wave energy is abundant and has the potential to be one of the most environmentally benign forms of electric energy. However, owing to lack of effective technology, water wave energy harvesting is almost unexplored as an energy source. Here, we report a network design made of triboelectric nanogenerators (TENGs) for large-scale harvesting of kinetic water energy. Relying on surface charging effect between the conventional polymers and very thin layer of metal as electrodes for each TENG, the TENG networks (TENG-NW) that naturally float on the water surface convert the slow, random, and high-force oscillatory wave energy into electricity. On the basis of the measured output of a single TENG, the TENG-NW is expected to give an average power output of 1.15 MW from 1 km(2) surface area. Given the compelling features, such as being lightweight, extremely cost-effective, environmentally friendly, easily implemented, and capable of floating on the water surface, the TENG-NW renders an innovative and effective approach toward large-scale blue energy harvesting from the ocean.
A 125 μm thickness, rollable, paper-based triboelectric nanogenerator (TENG) has been developed for harvesting sound wave energy, which is capable of delivering a maximum power density of 121 mW/m(2) and 968 W/m(3) under a sound pressure of 117 dBSPL. The TENG is designed in the contact-separation mode using membranes that have rationally designed holes at one side. The TENG can be implemented onto a commercial cell phone for acoustic energy harvesting from human talking; the electricity generated can be used to charge a capacitor at a rate of 0.144 V/s. Additionally, owing to the superior advantages of a broad working bandwidth, thin structure, and flexibility, a self-powered microphone for sound recording with rolled structure is demonstrated for all-sound recording without an angular dependence. The concept and design presented in this work can be extensively applied to a variety of other circumstances for either energy-harvesting or sensing purposes, for example, wearable and flexible electronics, military surveillance, jet engine noise reduction, low-cost implantable human ear, and wireless technology applications.
A flexible self-charging power system is built by integrating a fiber-based supercapacitor with a fiber-based triboelectric nanogenerator for harvesting mechanical energy from human motion. The fiber-based supercapacitor exhibits outstanding electrochemical properties, owing to the excellent pseudocapacitance of well-prepared RuO2 ·xH2 O by a vapor-phase hydrothermal method as the active material. The approach is a step forward toward self-powered wearable electronics.
Zinc oxide is potentially a useful material for ultraviolet detectors; however, a relatively long response time hinders practical implementation. Here by designing and fabricating a self-powered ZnO/perovskite-heterostructured ultraviolet photodetector, the pyroelectric effect, induced in wurtzite ZnO nanowires on ultraviolet illumination, has been utilized as an effective approach for high-performance photon sensing. The response time is improved from 5.4 s to 53 μs at the rising edge, and 8.9 s to 63 μs at the falling edge, with an enhancement of five orders in magnitudes. The specific detectivity and the responsivity are both enhanced by 322%. This work provides a novel design to achieve ultrafast ultraviolet sensing at room temperature via light-self-induced pyroelectric effect. The newly designed ultrafast self-powered ultraviolet nanosensors may find promising applications in ultrafast optics, nonlinear optics, optothermal detections, computational memories and biocompatible optoelectronic probes.
With the rapid advancement in artificial intelligence, wearable electronic skins have attracted substantial attention. However, the fabrication of such devices with high elasticity and breathability is still a challenge and highly desired. Here, a route to develop an all-fiber structured electronic skin with a scalable electrospinning fabrication technique is reported. The fabricated electronic skin is demonstrated to exhibit high pressure sensing with a sensitivity of 0.18 V kPa −1 in the detection range of 0-175 kPa. This wearable device could maintain prominent sensing performance and mechanical stability in the presence of large deformation, even when the elastic deformation is up to 50%. The electronic skin is easily conformable on different desired objects for real-time spatial mapping and long-term tactile sensing. Besides, it possesses high gas permeability with a water vapor transmittance rate of 10.26 kg m −2 d −1 . More importantly, the electronic skin is capable of working in a self-powered manner and even serves as a reliable power source to effectively drive small electronics. Possessing several compelling features, such as high sensitivity, high elasticity, high breathability as well as being self-powered and scalable in fabrication, the presented device paves a pathway for smart electronic skins.
Highly conductive and stretchy fibers are crucial components for smart fabrics and wearable electronics. However, most of the existing fiber conductors are strain sensitive with deteriorated conductance upon stretching, and thus, a compromised strategy via introducing merely geometric distortion of conductive path is often used for stable conductance. Here, we report a coaxial wet-spinning process for continuously fabricating intrinsically stretchable, highly conductive yet conductance-stable, liquid metal sheath-core microfibers. The microfiber can be stretched up to 1170%, and upon fully activating the conductive path, a very high conductivity of 4.35 × 104 S/m and resistance change of only 4% at 200% strain are realized, arising from both stretch-induced channel opening and stretching out of tortuous serpentine conductive path of the percolating liquid metal network. Moreover, the microfibers can be easily woven into an everyday glove or fabric, acting as excellent joule heaters, electrothermochromic displays, and self-powered wearable sensors to monitor human activities.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.