The first bionic membrane sensor based on triboelectrification is reported for self-powered physiological and behavioral measurements such as local internal body pressures for non-invasive human health assessment. The sensor can also be for self-powered anti-interference throat voice recording and recognition, as well as high-accuracy multimodal biometric authentication, thus potentially expanding the scope of applications in self-powered wearable medical/health monitoring, interactive input/control devices as well as accurate, reliable, and less intrusive biometric authentication systems.

A stretchable‐rubber‐based (SR‐based) triboelectric nanogenerator (TENG) is developed that can not only harvest energy but also serve as self‐powered multifunctional sensors. It consists of a layer of elastic rubber and a layer of aluminum film that acts as the electrode. By stretching and releasing the rubber, the changes of triboelectric charge distribution/density on the rubber surface relative to the aluminum surface induce alterations to the electrical potential of the aluminum electrode, leading to an alternating charge flow between the aluminum electrode and the ground. The unique working principle of the SR‐based TENG is verified by the coupling of numerical calculations and experimental measurements. A comprehensive study is carried out to investigate the factors that may influence the output performance of the SR‐based TENG. By integrating the devices into a sensor system, it is capable of detecting movements in different directions. Moreover, the SR‐based TENG can be attached to a human body to detect diaphragm breathing and joint motion. This work largely expands the applications of TENG not only as effective power sources but also as active sensors; and opens up a new prospect in future electronics.

Zinc oxide is potentially a useful material for ultraviolet detectors; however, a relatively long response time hinders practical implementation. Here by designing and fabricating a self-powered ZnO/perovskite-heterostructured ultraviolet photodetector, the pyroelectric effect, induced in wurtzite ZnO nanowires on ultraviolet illumination, has been utilized as an effective approach for high-performance photon sensing. The response time is improved from 5.4 s to 53 μs at the rising edge, and 8.9 s to 63 μs at the falling edge, with an enhancement of five orders in magnitudes. The specific detectivity and the responsivity are both enhanced by 322%. This work provides a novel design to achieve ultrafast ultraviolet sensing at room temperature via light-self-induced pyroelectric effect. The newly designed ultrafast self-powered ultraviolet nanosensors may find promising applications in ultrafast optics, nonlinear optics, optothermal detections, computational memories and biocompatible optoelectronic probes.

A light-self-induced pyro-phototronic effect in wurtzite ZnO nanowires is proposed as an effective approach to achieve ultrafast response ultraviolet sensing in p-Si/n-ZnO heterostructures. The relatively long response/recovery time of zinc-oxide-based ultraviolet sensors in air/vacuum has long been an obstacle to developing such detectors for practical applications. The response/recovery time and photoresponsivity are greatly improved by the pyro-phototronic effect.