No abstract

No abstract

Purpose – This paper aims to disclose the evolution of pendulum hardness of two-component acrylic polyurethane coatings during the cure process and attempts to describe the quantitative relationship between pendulum hardness and curing time. These findings are helpful for the study of fast curing acrylic polyurethane coatings. Design/methodology/approach – The pendulum hardness method was used to monitor the hardness of two-component acrylic polyurethane coatings during curing. The quantitative relationship between pendulum hardness and curing time can be obtained with Avrami equation. Findings – The evolution of coating pendulum hardness can be divided into three stages. By using the Avrami equation that explained the influence of both the acid value and the curing temperature on the drying speed of hydroxyl acrylic resin, the evolution of coating pendulum hardness during curing can also be accurately described. Research limitations/implications – It should be noted that the physical meaning of the Avrami exponent, n, is not yet clear. Practical implications – The results are of great significance for the development of fast-curing hydroxyl-functional acrylic resins, with the potential to improve the drying speed of the coatings used in automotive refinish. Originality/value – It is novel to divide the pendulum hardness into three stages, and, for the first time, the Avrami equation is utilized to describe the evolution of coating pendulum hardness during curing.

No abstract

U-type tubes are widely used in military and civilian fields and the quality of the internal surface of their channel often determines the merits and performance of a machine in which they are incorporated. Abrasive flow polishing is an effective method for improving the channel surface quality of a U-type tube. Using the results of a numerical analysis of the thermodynamic energy balance equation of a two-phase solid-liquid flow, we carried out numerical simulations of the heat transfer and surface processing characteristics of a two-phase solid-liquid abrasive flow polishing of a U-type tube. The distribution cloud of the changes in the inlet turbulent kinetic energy, turbulence intensity, turbulent viscosity, and dynamic pressure near the wall of the tube were obtained. The relationships between the temperature and the turbulent kinetic energy, between the turbulent kinetic energy and the velocity, and between the temperature and the processing velocity were also determined to develop a theoretical basis for controlling the quality of abrasive flow polishing.