In this study, a new high step-up high step-down bidirectional dc-dc converter is proposed. In the proposed converter, the voltage conversion ratio is increased by using two coupled inductors and switched capacitor circuit in both boost and buck operations. The proposed bidirectional converter in comparison with other presented high-voltage gain boost converters with two coupled inductors in the literature has the highest voltage conversion ratio. In this study, the proposed topology is analysed in all operating modes and the current and voltage stresses of all switches, voltage gain and maximum and minimum current through the inductors are calculated for both boost and buck operations. Finally, the accuracy of the obtained analytical results and correct operation of the proposed converter are verified through PSCAD/EMTDC simulation and experimental results.

Summary In this paper, a new interleaved non‐isolated bidirectional dc–dc converter with capability of zero voltage switching and high voltage gain is proposed. In the proposed converter by using two coupled inductors and one capacitor, the voltage gain is extended. Moreover, by using only an auxiliary circuit that includes an inductor and two capacitors, the zero voltage switching (ZVS) of two used switches in the first phase of converter can be achieved. The ZVS operation of two used switches in the second phase is always obtained without using any extra auxiliary circuit. This converter similar to other interleaved converters has low input current ripple and low current stress on switches. In this paper, the proposed converter is analyzed in all operating modes, and also the voltage gain, required conditions for ZVS operation of switches, voltage and current stresses of all switches, and the value of input current ripple in both boost and buck operations are obtained. Finally, the accuracy performance of the proposed converter is verified through simulation results in EMTDC/PSCAD software. Copyright © 2017 John Wiley & Sons, Ltd.

No abstract

In this paper, a new multiport zero voltage switching dc-dc converter is proposed.Multiport dc-dc converters are widely applicable in hybrid energy generating systems to provide substantial power to sensitive loads. The proposed topology can operate in 3 operational modes of boost, buck, and buck-boost. Moreover, it has zero voltage switching operation for all switches and has the ability to eliminate the input current ripple; also, at low voltage side, the input sources can be extended. In addition, it has the ability of interfacing 3 different voltages only by using 3 switches. In this paper, the proposed topology is analyzed theoretically for all operating modes; besides, the voltage and current equations of all components are calculated. Furthermore, the required soft switching and zero input currents ripple conditions are analyzed. Finally, to demonstrate the accurate performance of the proposed converter, the Power System Computer Aided Design(PSCAD)/ Electro Magnetic Transient Design and Control(EMTDC) simulation and experimental results are extracted and presented. KEYWORDS input current ripple cancellation, nonisolated multiport dc-dc converter, soft switching, zero voltage switching

No abstract