No abstract

In this paper, a new multiport zero voltage switching dc-dc converter is proposed.Multiport dc-dc converters are widely applicable in hybrid energy generating systems to provide substantial power to sensitive loads. The proposed topology can operate in 3 operational modes of boost, buck, and buck-boost. Moreover, it has zero voltage switching operation for all switches and has the ability to eliminate the input current ripple; also, at low voltage side, the input sources can be extended. In addition, it has the ability of interfacing 3 different voltages only by using 3 switches. In this paper, the proposed topology is analyzed theoretically for all operating modes; besides, the voltage and current equations of all components are calculated. Furthermore, the required soft switching and zero input currents ripple conditions are analyzed. Finally, to demonstrate the accurate performance of the proposed converter, the Power System Computer Aided Design(PSCAD)/ Electro Magnetic Transient Design and Control(EMTDC) simulation and experimental results are extracted and presented. KEYWORDS input current ripple cancellation, nonisolated multiport dc-dc converter, soft switching, zero voltage switching

No abstract

Summary In this paper, a new nonisolated free ripple input current bidirectional dc‐dc converter with capability of zero voltage switching (ZVS) is proposed. The free ripple input current condition at low voltage side is achieved by using third winding of a coupled inductor and a capacitor for the whole range of duty cycles. In the proposed structure, the voltage conversion ratio can be more increased by adding the turn ratio of the second winding of the coupled inductor for the whole range of duty cycles. By adjusting the value of an auxiliary inductor in the topology of the converter, according to the power, the ZVS operation of the implemented 2 switches can be achieved throughout the whole power range. The mentioned features of proposed converter are validated theoretically for both boost and buck operations. In this paper, the proposed converter is analyzed for all operating modes. Moreover, all equations of the voltages and currents of all components, voltage conversion ratio, the required conditions for ZVS operation of switches, and also required conditions for canceling input current ripple at low voltage side are obtained. Finally, the performance of the proposed converter is reconfirmed through experimental and EMTDC/PSCAD simulation results.

In this paper, an interleaved DC-DC step-up boost converter with high voltage conversion ratio and low voltage stresses on switches and diodes is proposed.The proposed converter has low average current passing through the diodes and switches and low input current ripple as a feature of interleaved converters. The voltage gain of the proposed converter can be increased by adding more diode-capacitor modules; therefore, the proposed converter has expandable structure. In addition, by implementing more diode-capacitor modules, the switching stresses would be more decreased. Also, to evaluate the performance of the proposed converter, it is compared with other similar presented circuits in the literature. The proposed converter is not only able to provide higher voltage gain but also has lower voltage stresses on switches and diodes.Consequently, switches and diodes with low voltage ratings can be selected.Theoretical analysis is provided in this study for each operation mode and the average current through the switches, diodes and inductors, voltage stresses on switches and diodes, voltage gain, and input current ripple are calculated. Finally, to demonstrate the accuracy performance of the proposed converter, a 450-W prototype is implemented practically.KEYWORDS diode-capacitor, high voltage gain, interleaved DC-DC converter, low input current ripple, low voltage stresses on switches