The reaction of bis(imidoyl) chlorides of oxalic acid with monoalkyl hydrazines leads to substituted Delta(2)-1,2-diazetines, which are versatile building blocks for ring-transformation reactions. One remarkable product originating from side reactions featured by a strong orange/red fluorescence was confirmed as a novel fluorubine derivative. In continuing our studies to substituted oligoazaacenes, we developed several synthetic entries to build up novel fluorubine derivatives, in which particularly aminobridged bis(quinoxaline)s are the key products for cationic hexaazapentacenes. We would like to discuss the possible formation pathways of these fluorubine derivatives, which exhibit interesting photophysical and chemical properties. The structures of all new derivatives were confirmed by common analytical methods (NMR spectroscopy, CV, UV/Vis, mass spectrometry, elemental analysis, and X-ray structural analysis) and will be discussed on selected examples in more detail.
Polymer-derived amorphous silicon oxycarbide (SiOC) ceramics are designed for hydrogen separation at high temperatures. To form amorphous SiOC top-coating with the thickness of about 300 nm, tubular porous g-Al 2 O 3 /a-Al 2 O 3 substrates with gradient porosity are threefold coated by vinylfunctionalized polysiloxane and pyrolyzed at 700 C under argon. N 2 -physisorption measurement confirms formation of microporous material with a specific surface area of about 400 m 2 g -1 . Single gas permeance characterization of the SiOC membrane at 300 C reveals H 2 /CO 2 and H 2 /SF 6 ideal permselectivities of about 10 and 320, respectively. The experimental gas permeance data are modeled using solid-state diffusion (for He and H 2 ) and gas translational diffusion (for CO 2 and SF 6 ) mechanisms.
Conductive inkjet printing with metal nanoparticles is irreversible because the particles are sintered into a continuous metal film. The resulting structures are difficult to remove or repair and prone to cracking. Here, a hybrid ink is used to obviate the sintering step and print interconnected particle networks that become highly conductive immediately after drying. It is shown that reversible conductive printing is possible on low‐cost cardboard samples after applying standard paper industry coats that are adapted in terms of surface energy and porosity. The conductivity of the printed films approaches that of sintered standard inks on the same substrate, but the mobility of the hybrid particle film makes them less sensitive to cracks during bending and folding of the substrate. Damages that occur can be partially repaired by wetting the film such that particle mobility is increased and particles move to bridge insulating gaps in the film. It is demonstrated that the conductive material can be recovered from the cardboard at the end of its life time and be redispersed to recycle the particles and reuse them in conductive inks.
Superparamagnetic Ni nanoparticles with diameters of about 3 nm are formed in situ at room temperature in a polysilazane matrix, forming Ni/polysilazane nanocomposite, in the reaction between a polysilazane and trans-bis(aceto-kO)bis(2-aminoethanol-k(2)N,O)nickel(II). The thermolysis of the Ni/polysilazane nanocomposite at 700 °C in an argon atmosphere results in a microporous superparamagnetic Ni/silicon oxycarbonitride (Ni/SiCNO) ceramic nanocomposite. The growth of Ni nanoparticles in Ni/SiCNO ceramic nanocomposite is totally suppressed even after thermolysis at 700 °C, as confirmed by HRTEM and SQUID characterizations. The analysis of saturation magnetization of Ni nanoparticles in Ni/polysilazane and Ni/SiCNO nanocomposites indicates that the saturation magnetization of Ni nanoparticles is higher than expected values and infers that the surfaces of Ni nanoparticles are not oxidized. The microporous superparamagnetic Ni/SiCNO nanocomposite is shaped as a free-standing monolith and foam. In addition, Ni/SiCNO membranes are fabricated by the dip-coating of a tubular alumina substrate in a dispersion of Ni/polysilazane in THF followed by a thermolysis at 700 °C under an argon atmosphere. The gas separation performance of Ni/SiCNO membranes at 25 and 300 °C is assessed by the single gas permeance (pressure rise technique) using He, H2, CO2, N2, CH4, n-propene, n-propane, n-butene, n-butane, and SF6 as probe molecules. After hydrothermal treatment, the higher increase in the hydrogen permeance compared to the permeance of other gases as a function of temperature indicates that the hydrogen affinity of Ni nanoparticles influences the transport of hydrogen in the Ni/SiCNO membrane and Ni nanoparticles stabilize the structure against hydrothermal corrosion.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.