The internal structure of nanometric microgels in water has been studied as a function of temperature, crosslinker content, and level of deuteration. Small-angle neutron scattering from poly(N-isopropylmethacrylamide) (pNIPMAM, volume phase transition ≈ 44 °C) microgel particles of radius well below 100 nm in D2O has been measured. The intensities have been analyzed with a combination of polymer chain scattering and form-free radial monomer volume fraction profiles defined over spherical shells, taking polydispersity in size of the particles determined by AFM into account. A reverse Monte Carlo optimization using a limited number of parameters was developed to obtain smoothly decaying profiles in agreement with the experimentally scattered intensities. Result are compared to the swelling curve of microgel particles in the temperature range from 15 to 55 °C obtained from photon correlation spectroscopy (PCS). In addition to hydrodynamic radii measured by PCS, our analysis provides direct information about internal water content and gradients, the strongly varying steepness of the density profile at the particle-water interface, the total spatial extension of the particles, and the visibility of chains. The model has also been applied to a variation of the crosslinker content, N,N′-methylenebisacrylamide (BIS), from 5 to 15 mol%, providing insight in the impact of chain architecture and crosslinking on water uptake and on the definition of the polymer-water interface. The model can easily be generalized to arbitrary monomer contents and types, in particular mixtures of hydrogenated and deuterated species, paving the way to detailed studies of monomer distributions inside more complex microgels, in particular core-shell particles.
Colloidal aqueous microgels have attracted notable attention due to their possible applications in both polymer chemistry and the (bio)material sector. Due to their soft internal network structure and their response to different external stimuli, they are suitable as carrier systems for different kinds of molecules (e.g. nanoparticles, drugs, diagnostic agents, and enzymes), as optically active materials or even as model systems for fundamental research on soft condensed matter. Within the class of microgels, a variety of molecular structures is possible. The aim of this manuscript is to review recent progress in the domain of copolymer microgels with different architectures. Although most of the work is based on microgels with poly(N-isopropyl acrylamide) (NIPAM) as one component, non-NIPAM based copolymer systems are also presented and discussed.
Abstract:In this work, we compare the properties of smart homopolymer microgels based on N-n-propylacrylamide (NNPAM), N-isopropylacrylamide (NIPAM) and N-isopropylmethacrylamide (NIPMAM) synthesized under identical conditions. The particles are studied with respect to size, morphology, and swelling behavior using scanning electron and scanning force microscopy. In addition, light scattering techniques and fluorescent probes are employed to follow the swelling/de-swelling of the particles. Significant differences are found and discussed. Poly(N-n-propylacrylamide) (PNNPAM) microgels stand out due to their very sharp volume phase transition, whereas Poly(N-isopropylmethacrylamide) (PNIPMAM) particles are found to exhibit a more homogeneous network structure compared to the other two systems.
Stimuli responsive surface structures attract increasing attention due to a large variety of envisioned applications. The controlled organization of poly(N-isopropyl acrylamid), PNIPAM microgel particles at solid surfaces inspired numerous research activities. In this review article, we briefly discuss the swelling/deswelling properties of adsorbed microgel particles in comparison to the behavior in the bulk phase. The presence of the solid interface highly influences and changes their behavior with respect to the properties in solution. Furthermore, the confinement on a solid substrate allows the direct and in-situ investigation of the mechanical properties of the microgel particles. Additionally, we briefly review the research on microgel particles at liquid interfaces. At these interfaces new interesting effects occur. Moreover, we discuss some interesting work on potential applications. In this context, microgel particles are often used as an active component for responsive coatings of various functionality envisioning applications, e.g. in medicine, biotechnology, and nanooptics.Zusammenfassung: Responsive Oberflächenmaterialien finden aufgrund der damit verbundenen potentiellen technischen Anwendungsmöglichkeiten große Beachtung in der aktuellen Forschung. Die Möglichkeit, kolloidale Gelpartikel aus poly(N-Isopropylacrylamid), PNIPAM an festen Oberflächen kontrolliert anzuordnen, inspirierte vielfältige Forschungsakivitäten. In diesem Übersichtsartikel diskutieren wir das Quellverhalten adsorbierter Mikrogelpartikel im Vergleich zu
Vesicle shape and bilayer parameters are studied by small-angle X-ray (SAXS) and small-angle neutron (SANS) scattering in the presence of the saponin aescin. We confirm successful incorporation of aescin molecules by analysis of the radii of gyration RG and study furthermore the impact of aescin incorporation on bilayer thickness parameters from the neutron and X-ray perspective. Additionally, the bending elasticity (κ) of these 1,2-dimyristoyl-sn-glycero-3-phosphocholine vesicle bilayers is studied in the presence of aescin. Neutron spin-echo spectroscopy (NSE) allows to detect subtle changes in the dynamics and κ of lipid membranes. Changes of κ are detectable at temperatures below and above the main phase transition temperature Tm of the lipid. The impact of aescin is much more significant below Tm. It has been found that below Tm the addition of aescin to the vesicles decreases the value of κ and softens the bilayer. Above Tm the value of κ increases with increasing aescin content and the bilayer becomes more rigid. Altogether, we demonstrate by analysis of the structure and dynamics of the vesicles that the impact of aescin strongly depends on the lipid state. Below Tm the membrane becomes fluidized and softer, above Tm solidified and stiffer compared to a DMPC membrane without additive at similar conditions.
Large vesicles obtained by the extrusion method represent adequate membrane models to probe membrane dynamics with neutron radiation. Particularly, the shape fluctuations around the spherical average topology can be recorded by neutron spin echo (NSE). In this paper we report on the applicable theories describing the scattering contributions from bending-dominated shape fluctuations in diluted vesicle dispersions, with a focus on the relative relevance of the master translational mode with respect to the internal fluctuations. Different vesicle systems, including bilayer and non-bilayer membranes, have been scrutinized. We describe the practical ranges where the exact theory of bending fluctuations is applicable to obtain the values of the bending modulus from experiments, and we discuss about the possible internal modes that could be alternatively contributing to shape fluctuations.
Abstract:For the effective use of live cells in biomedicine as in vitro test systems or in biotechnology, non-invasive cell processing and characterisation are key elements. Thermoresponsive polymer coatings have been demonstrated to be highly beneficial for controlling the interaction of adherent cells through their cultivation support. However, the widespread application of these coatings is hampered by limitations in their adaptability to different cell types and because the full range of applications has not yet been fully explored. In the work presented here, we address these issues by focusing on three different aspects. With regard to the first aspect, by using well-defined laminar flow in a microchannel, a highly controllable and reproducible shear force can be applied to adherent cells. Employing this tool, we demonstrate that cells can be non-invasively detached from a support using a defined shear flow. The second aspect relates to the recent development of simple methods for patterning thermoresponsive coatings. Here, we show how such patterned coatings can be used for improving the handling and reliability of a wound-healing assay. Two pattern geometries are tested using mouse fibroblasts and CHO cells. In terms of the third aspect, the adhesiveness of cells depends on the cell type. Standard thermoresponsive coatings are not functional for all types of cells. By coadsorbing charged nanoparticles and thermoresponsive microgels, it is demonstrated that the adhesion and detachment behaviour of cells on such coatings can be modulated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.