Ruthenium (Ru)‐based electrocatalysts as platinum (Pt) alternatives in catalyzing hydrogen evolution reaction (HER) are promising. However, achieving efficient reaction processes on Ru catalysts is still a challenge, especially in alkaline media. Here, the well‐dispersed Ru nanoparticles with adjacent Ru single atoms on carbon substrate (Ru1,n‐NC) is demonstrated to be a superb electrocatalyst for alkaline HER. The obtained Ru1,n‐NC exhibits ultralow overpotential (14.8 mV) and high turnover frequency (1.25 H2 s‐1 at −0.025 V vs reversible hydrogen electrode), much better than the commercial 40 wt.% Pt/C. The analyses reveal that Ru nanoparticles and single sites can promote each other to deliver electrons to the carbon substrate. Eventually, the electronic regulations bring accelerated water dissociation and reduced energy barriers of hydroxide/hydrogen desorption on adjacent Ru sites, then an optimized reaction kinetics for Ru1,n‐NC is obtained to achieve superb hydrogen generation in alkaline media. This work provides a new insight into the catalyst design in simultaneous optimizations of the elementary steps to obtain ideal HER performance in alkaline media.

Plasmonic materials possessing dense hot spots with high field enhancement over a large area are highly desirable for ultrasensitive biochemical sensing and efficient solar energy conversion; particularly those based on low‐cost noncoinage metals with high natural abundance are of considerable practical significance. Here, 3D aluminum hybrid nanostructures (3D‐Al‐HNSs) with high density of plasmonic hot spots across a large scale are fabricated via a highly efficient and scalable nonlithographic method, i.e., millisecond‐laser‐direct‐writing in liquid nitrogen. The nanosized alumina interlayer induces intense and dual plasmonic resonance couplings between adjacent Al nanoparticles with bimodal size distribution within each of the hybrid assemblies, leading to remarkably elevated localized electric fields (or hot spots) accessible to the analytes or reactants. The 3D‐stacked nanostructure substantially raises the hot spot density, giving rise to plasmon‐enhanced light harvesting from deep UV to the visible, strong enhancement of Raman signals, and a very low limit of detection outperforming reported Al nanostructures, and even comparable to the noble metals. Combined with the long‐term stability and good reproducibility, the 3D‐Al‐HNSs hold promise as a robust low‐cost plasmonic material for applications in plasmon‐enhanced spectroscopic sensing and light harvesting.

Surficial defects in semiconductor can induce high density of carriers and cause localized surface plasmon resonance which is prone to light harvesting and energy conversion, while internal defects may cause serious recombination of electrons and holes. Thus, it is significant to precisely control the distribution of defects, although there are few successful examples. Herein, an effective strategy to confine abundant defects within the surface layer of Cu S nanoflake arrays (NFAs) is reported, leaving a perfect internal structure. The Cu S NFAs are then applied in photoelectrochemical (PEC) water splitting. As expected, the surficial defects give rise to strong LSPR effect and quick charge separation near the surface; meanwhile, they provide active sites for catalyzing hydrogen evolution. As a result, the NFAs achieve the top PEC properties ever reported for Cu S-based photocathodes.

We present a scalable route for the preparation of single crystalline Cu2ZnSnS4 nanosheet arrays on conductive glass substrate, and demonstrate this architecture as an effective photocathode for solar hydrogen production.

Enhancing activity and stability of iridium-(Ir-) based oxygen evolution reaction (OER) catalysts is of great significance in practice. Here, we report a vacancy-rich nickel hydroxide stabilized Ir single-atom catalyst (Ir 1 −Ni(OH) 2 ), which achieves longterm OER stability over 260 h and much higher mass activity than commercial IrO 2 in alkaline media. In situ X-ray absorption spectroscopy analysis certifies the obvious structure reconstruction of catalyst in OER. As a result, an active structure in which highvalence and peripheral oxygen ligands-rich Ir sites are confined onto the nickel oxyhydroxide surface is formed. In addition, the precise introduction of atomized Ir not only surmounts the large-range dissolution and agglomeration of Ir but also suppresses the dissolution of substrate in OER. Theoretical calculations further account for the activation of Ir single atoms and the promotion of oxygen generation by high-valence Ir, and they reveal that the deprotonation process of adsorbed OH is rate-determining.

Developing highly efficient, selective and low-overpotential electrocatalysts for carbon dioxide (CO2) reduction is crucial. This study reports an efficient Ni single-atom catalyst coordinated with pyrrolic nitrogen and pyridinic nitrogen for CO2 reduction to carbon monoxide (CO). In flow cell experiments, the catalyst achieves a CO partial current density of 20.1 mA cmgeo−2 at −0.15 V vs. reversible hydrogen electrode (VRHE). It exhibits a high turnover frequency of over 274,000 site−1 h−1 at −1.0 VRHE and maintains high Faradaic efficiency of CO (FECO) exceeding 90% within −0.15 to −0.9 VRHE. Operando synchrotron-based infrared and X-ray absorption spectra, and theoretical calculations reveal that mono CO-adsorbed Ni single sites formed during electrochemical processes contribute to the balance between key intermediates formation and CO desorption, providing insights into the catalyst’s origin of catalytic activity. Overall, this work presents a Ni single-atom catalyst with good selectivity and activity for CO2 reduction while shedding light on its underlying mechanism.

Single-atom catalysts (SACs) that can achieve maximum atom utilization and provide well-defined active sites in energy conversion reactions have attracted much attention in the past decade. In general, the local...

No abstract