No abstract

A simple and sensitive biosensor array based on phosphorescence detection that is able to detect oxygen and glucose in human serum, respectively, has been developed. We demonstrate an electrochemical method as a fast, effective, tunable, and versatile means of growing phosphorescence sensing material. This sensing material, crystalline iridium(III)-Zn(II) coordination polymers, namely Ir-Zn(e), was grown on a stainless steel mesh and then doped in a sol-gel matrix. The emission of Ir-Zn(e) was ascribed to a metal-to-ligand charge transfer transition (MLCT). The noteworthy oxygen-sensing properties of Ir-Zn(e) were also evaluated. The optimal oxygen-sensing conditions of Ir-Zn(e) with a deduced K(SV) value of 3.55 were 5 V and 30 °C for 1 hour. Moreover, the short response time (23 s) and the recovery time (21 s) toward oxygen have been measured. The reversibility experiment was carried out for eleven cycles. The resulting >70% recovery of intensity for Ir-Zn(e) on each cycle demonstrated a high degree of reproducibility during the sensing process. The detection limit could be 0.050% for gaseous oxygen. The sensing substrate was subsequently built up under glucose oxidase encapsulated in hydrogel and then immobilized on an egg membrane by the layer-by-layer method. Once the glucose solution was injected into this array, oxygen content depleted simultaneously with a concomitant increase in the phosphorescence of coordination polymers. The linear dynamic range for the determination of glucose was 0.1-6.0 mM, the correlation coefficient (R(2)) was 0.9940 (y = 0.75 [glucose] + 0.539), and the response time was less than 120 s. The minimum detectable concentration for glucose was calculated to be 0.05 mM from three times signal to noise. The photophysical properties of the sensing material and the effects of buffer concentration, pH, interference, matrix effect, temperature, and the stability of the biosensor array have also been studied in detail. The biosensor array was successfully applied to the determination of glucose in human serum.

Some basic requirements of bone tissue engineering include cells derived from bone tissues, three-dimensional (3D) scaffold materials, and osteogenic factors. In this framework, the critical architecture of the scaffolds plays a crucial role to support and assist the adhesion of the cells, and the subsequent tissue repairs. However, numerous traditional methods suffer from certain drawbacks, such as multi-step preparation, poor reproducibility, high complexity, difficulty in controlling the porous architectures, the shape of the scaffolds, and the existence of solvent residue, which limits their applicability. In this work, we fabricated innovative poly(lactic-co-glycolic acid) (PLGA) porous scaffolds, using 3D-printing technology, to overcome the shortcomings of traditional approaches. In addition, the printing parameters were critically optimized for obtaining scaffolds with normal morphology, appropriate porous architectures, and sufficient mechanical properties, for the accommodation of the bone cells. Various evaluation studies, including the exploration of mechanical properties (compressive strength and yield stress) for different thicknesses, and change of structure (printing angle) and porosity, were performed. Particularly, the degradation rate of the 3D scaffolds, printed in the optimized conditions, in the presence of hydrolytic, as well as enzymatic conditions were investigated. Their assessments were evaluated using the thermal gravimetric analyzer (TGA), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). These porous scaffolds, with their biocompatibility, biodegradation ability, and mechanical properties, have enabled the embryonic osteoblast precursor cells (MC3T3-E1), to adhere and proliferate in the porous architectures, with increasing time. The generation of highly porous 3D scaffolds, based on 3D printing technology, and their critical evaluation, through various investigations, may undoubtedly provide a reference for further investigations and guide critical optimization of scaffold fabrication, for tissue regeneration.

Among plentiful porous nanomaterials, noble metal aerogels taken as nanozymes attract broad attention in sensing applications with their distinct enzyme mimic functions. In the catalytic field, the heteroatom doping strategy is a kind of way with great promise in improving the enzyme mimic activity of noble metal aerogels. In this experiment, we find a type of creative materials that were prepared by the fast and simple method. Due to the unique porous structure and synergetic effect from doped atoms, PdRu aerogels co-doped with boron and nitrogen (B, N-PdRu aerogels) were prepared using NH3BH3 as a reductant, which present improved peroxidase mimicking activity. With the existence of H2O2, the oxidation of 3,3′,5,5′-tetramethylbenzidine was catalyzed by B, N-PdRu aerogels fairly efficiently, whose solution would be a blue appearance at optimum absorption wavelength 652 nm. Thus, by the tandem reaction bound to the enzyme glucose oxidase, the B, N-PdRu aerogels can be used for the sensitive determination of glucose. The new method has a good linear detection effect for glucose in the range of 10 μM to 2 mM. The minimum limit of detection can reach as low as 6 μM. This work will contribute to research on the rational design of metal aerogels based on the heteroatomic doping strategy and enhance the corresponding performance for a variety of applications.

BackgroundThis study aimed to explore the factors affecting the level of hope and psychological health status of patients with cervical cancer (CC) during radiotherapy.Material/MethodsA total of 480 CC patients were recruited. Psychological distress scale, Herth hope index, functional assessment cancer therapy-cervix, and Jolowiec coping scale were used to conduct surveys on psychological distress, level of hope, quality of life (QOL), and coping style to analyze the factors affecting the level of hope and psychological health status of CC patients.ResultsThe morbidity of significant psychological distress in 480 CC patients during radiotherapy was 68%, and the main factors causing psychological distress were emotional problems and physical problems. During radiotherapy, most patients had middle and high levels of hope, and the psychological distress index of patients was negatively correlated with the level of hope. The QOL of CC patients during radiotherapy were at middle and high levels, and the QOL was positively correlated with confrontment, optimism, appeasement, and self-reliance, but it was negatively correlated with predestination and emotional expression.ConclusionsFor CC patients during radiotherapy, the morbidity of psychological distress was high, but they were at middle and high levels of hope.