The effect of chain architecture on the morphological and tensile properties of series of multigraft copolymers, with regularly spaced tri-, tetra-, and hexafunctional junction points, was investigated using transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and tensile testing. The materials were synthesized by coupling difunctional polyisoprene (PI) spacers and living polystyrene (PS) branches, made by anionic polymerization, with chlorosilanes of different functionalities. Since the coupling process is a step-growth polymerization, yielding polydisperse products, fractionation was utilized to separate each material into three fractions (high, middle, and low molecular weight), each of low polydispersity. All three fractions have the same chain architecture on a per junction point basis but differ in the number of junction point units per molecule. By applying the constituting block copolymer concept, the physical behavior of these molecules was compared with current theories. It was found that morphological behavior of these graft copolymers can be predicted using theoretical approaches and is independent on the number of junction points. The number of the junction points, however, greatly influences the long-range order of microphase separation. Additionally, two new parameters for adjusting mechanical properties of multigraft copolymers were found in this investigation: (1) functionality of the graft copolymerstri-, tetra-, or hexafunctionalsand (2) number of junction points per molecule. An increase in functionality causes a change in morphology, resulting in a high level of tensile strength for tetrafunctional (cylindrical) and hexafunctional (lamellae) multigraft copolymers, leading to about the twice the strength of the spherical trifunctional multigrafts of similar overall composition. Tetrafunctional multigraft copolymers show a surprisingly high strain at break, far exceeding that of commercial block copolymer thermoplastic elastomers (TPEs). Strain at break and tensile strength increase linearly with the number of junction points per molecule. Hysteresis experiments at about 300-900% deformation demonstrate that multifunctional multigraft copolymers have improved high elasticity as compared to commercial TPEs like Kraton or Styroflex.

The phase behavior of mixtures of polyisobutylene (PIB), polyethylene (PE), and a symmetric polyethylene-block-head-to-head polypropylene copolymer (PE−PP) was studied by transmission electron microscopy (TEM) and small-angle neutron and light scattering. The thermodynamic interactions between PE/PP and PE/PIB are repulsive (Flory−Huggins parameter χ > 0 and decreases with increasing temperature), while those between PP/PIB are attractive (χ < 0 and increases with increasing temperature). When the PE−PP copolymer is added to a 50/50 PE/PIB mixture, the resulting phase diagram in temperature−copolymer composition space exhibits many of the characteristics of “fish-shaped” phase diagrams found in oil/water mixtures stabilized by balanced surfactants. This is due to the interplay between the different χ parameters that characterize the system. Lamellar phases, single droplet microemulsions, and bicontinuous microemulsions were observed. The length scales of these structures and the locations of the phase transition points on the phase diagram determined by TEM and scattering are in reasonable agreement. Phase transitions from a lamellar phase to a single droplet microemulsion phase, and from a bicontinuous microemulsion to a macrophase-separated structure, have been identified.

An electric field induced sphere-to-cylinder transition in thin films of asymmetric polystyrene-b-poly(methyl methacrylate) diblock copolymers was observed. In the absence of an applied electric field, thin films of the asymmetric diblock copolymer consisted of layers of spherical microdomains with poor in-plane long-range ordering. Under a ∼40V/μm applied electric field, hexagonally packed cylindrical microdomains normal to the surface were found. Cross-sectional transmission electron microscopy images of the intermediate stages of the alignment indicated that, under an electric field, the asymmetric diblock copolymer formed spherical microdomains that were deformed into ellipsoids and, with time, interconnected into cylindrical microdomains oriented in the direction of the applied electric field. Simulations suggest that improved long-range order of the cylindrical microdomains could be achieved by cycling the electrical field.

The alignment of thin films of symmetric diblock copolymer of polystyrene and poly(methyl methacrylate), PS-b-PMMA, in an electric field was studied as a function of film thickness and interfacial energy using small-angle neutron scattering and transmission electron microscopy. There is a competition between the applied electric field, aligning the microdomains normal to the surface, and surface fields that tend to align the microdomains parallel to the surface. For films with thickness t < 10L 0, where L 0 is the equilibrium period of the copolymer in the bulk, interfacial interactions are dominant, and the lamellar microdomains orient parallel to the substrate surface regardless of the applied electric field. If t > 10L 0, interfacial interactions become less important, and lamellar microdomains in the center of the films could be oriented in the direction of the applied field, i.e., normal to the surface. Transmission electron microscopy shows that the dominant mechanism of orientation is one where the lamellae are locally disrupted and re-form with an orientation in the direction of the applied field.

Particle-stabilized W/O/W emulsion gels were fabricated using a two-step procedure: ( i) a W/O emulsion was formed containing saccharose (for osmotic stress balance) and gelatin (as a gelling agent) in the aqueous phase and polyglycerol polyricinoleate (a lipophilic surfactant) in the oil phase; ( ii) this W/O emulsion was then homogenized with another water phase (W) containing wheat gliadin nanoparticles (hydrophilic emulsifier). The gliadin nanoparticles in the external aqueous phase aggregated at pH 5.5, which led to the formation of particle-stabilized W/O/W emulsion gels with good stability to phase separation. These emulsion gels were then used to coencapsulate a hydrophilic bioactive (epigallocatechin-3-gallate, EGCG) in the internal aqueous phase (encapsulation efficiency = 65.5%) and a hydrophobic bioactive (quercetin) in the oil phase (encapsulation efficiency = 97.2%). The emulsion gels improved EGCG chemical stability and quercetin solubility under simulated gastrointestinal conditions, which led to a 2- and 4-fold increase in their effective bioaccessibility, respectively.

A series of five cyclic block copolymers of styrene and butadiene, having essentially the same molecular weight (52 ( 5 kg/mol) and PS volume fraction varying from 11 to 70%, were synthesized by cyclization of R,ω-dilithium polystyrene-polybutadiene-polystyrene triblock copolymers with bis-(dimethylchlorosilyl)ethane. The cyclic block copolymers thus obtained have practically the same molecular weight and composition as their corresponding linear triblock copolymers. All materials were investigated via transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) techniques. In three cases where the cyclic and the corresponding linear block copolymer had the same morphology, the domain spacings of the cyclic block copolymers are found to be 84%-89% of those of their respective linear triblock copolymers. In the other two cases different morphologies are found in the cyclic and its corresponding triblock copolymer. Compared to their linear triblocks, the interfaces are curved away from the connected end blocks.

Summary: PS-PI multigraft copolymers with tri-tetra-and hexafunctional polystyrene branch points have been studied to investigate the influence of molecular architecture on morphological and tensile properties and to find novel material concepts. It was found that the morphological behaviour of these grafted copolymers can be predicted using theoretical approaches. The number of branch points, however, greatly influences the long-range order of microphase separation. Additionally, two new parameters for adjusting mechanical properties of multigraft copolymers are found in our investigations: 1) functionality of the graft copolymer: tri-, tetra-or hexafunctional and 2) number of branch points per molecule. Tetrafunctional multigraft copolymers show surprising high strain at break values up to 1550 %. With increasing number of branch points strain at break and tensile strength increase, where a linear dependence of mechanical properties on the number of branch points is obvious. Excellent elasticity of tetra and hexafunctional multigraft copolymers at high deformation was proved in hysteresis experiments.

To probe the effect of junction point functionality in miktoarm star block copolymer architecture on chain conformation and morphology, a series of A n B n miktoarm star copolymers where A arms are PS blocks and B arms are PI blocks were investigated. The overall series including a diblock and the star block copolymers can be represented by A n B n , where n = 1, 2, 4, and 16. These materials were produced by synthesizing a single batch of living PS arms and a single batch of living PI arms and then linking them together with chlorosilane coupling agents of different functionality. Thus, all PS arms are identical and all PI arms are identical across the entire series of materials. All stars in the series have equal numbers of PS and PI arms, and the volume fractions of all the samples in the series (nearly 0.50 PS by volume) are identical within experimental error. All the materials were found, via small-angle X-ray scattering and transmission electron microscopy, to form lamellar morphologies. A significant increase in lamellar spacing with increasing junction point functionality (n) was found in this series of materials and can be attributed to molecular crowding near the junction point.