4H-SiC wafers are more likely to sustain a lower material removal rate (MRR) and severe subsurface damage in conventional chemical mechanical polishing (CMP) methods. To overcome the material removal bottleneck imposed by aqueous chemistry, a high-efficiency polishing of 4H-SiC wafers method by applying reactive nonaqueous fluids to self-sharpening fixed abrasive pads has been proposed in our former research works. Furthermore, to improve the material removal rate and reduce the surface roughness Sa value of 4H-SiC substrates of the Si face, the effect of organic acid, H2O2, and Triton X-100 in nonaqueous slurry on 4H-SiC polishing was investigated. The MRR of 12.83 μm/h and the Sa of 1.45 nm can be obtained by the orthogonally optimized slurry consisting of 3 wt% H2O2, 0.5 wt% Triton X-100 at pH = 3. It is also found that the addition of different levels of oxidant H2O2 and surfactant Triton X-100 components not only increased the MRR of the 4H-SiC substrates of the Si face but also achieved a lower Sa value; in that, the polishing efficiency of the Si side of the 4H-SiC wafers and the surface quality of the 4H-SiC wafers could be effectively improved by the optimization of the polishing slurry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.