Abstract. Finding an easy-to-build coils set has been a critical issue for stellarator design for decades. Conventional approaches assume a toroidal "winding" surface.We'll investigate if the existence of winding surface unnecessarily constrains the optimization, and a new method to design coils for stellarators is presented. Each discrete coil is represented as an arbitrary, closed, one-dimensional curve embedded in three-dimensional space. A target function to be minimized that covers both physical requirements and engineering constraints is constructed. The derivatives of the target function are calculated analytically. A numerical code, named FOCUS, has been developed. Applications to a simple configuration, the W7-X, and LHD plasmas are presented.

Objective: FNA is a simple, safe, cost-effective and accurate diagnostic tool for the initial screening of patients with thyroid nodules. The aims of this study were to determine the diagnostic utility of FNAC performed in our institution, assess the cytomorphologic features that contribute to diagnostic errors and propose improvement measures.Methods: A total of 2781 FNACs were included in the study, and 1122 cases were compared with their histological diagnoses. We retrospectively reexamined our discordant (both false-negative and false-positive) cases and performed a systematic review of previous studies on causes of misdiagnoses.Results: When DC V and DC VI were both considered cytologic-positive, the sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and diagnostic accuracy were 98.3, 30.9, 94.9, 58.3 and 93.5%, respectively. If DC VI was considered cytologic-positive, the sensitivity, specificity, PPV, NPV and diagnostic accuracy of FNAC were 98.0, 84.0, 99.4, 58.3, and 97.5% respectively. The main cause of false-negative diagnoses was sampling error (13/15, 86.7%), while interpretation error led to the majority of the false-positive diagnoses (38/47, 80.9%). Overlapping cytological features in adenomatous hyperplasia, thyroiditis and cystic lesions were the major factors contributing to interpretation errors, while the size and number of nodules may have led to false-negative diagnoses because of heterogeneity and unsampled areas. Conclusions:The sensitivity and PPV of thyroid FNAC in our institution were higher than those in the published data, while the specificity and NPV were lower. Regarding the FNA category DC V, a frozen section analysis during diagnostic lobectomy is necessary. Multiple passes should be performed in various parts of a large nodule or from different nodules to reduce the risk of false-negative findings. Cytopathologists should strengthen their criteria for the identification of adenomatous hyperplasia, thyroiditis and cystic lesions to avoid false-positive diagnoses. NIFTP has little effect on diagnostic accuracy and the distribution of diagnostic errors.

The Keda Torus eXperiment (KTX) is a medium-sized reversed field pinch (RFP) device under construction at the University of Science and Technology of China. The KTX has a major radius of 1.4 m and a minor radius of 0.4 m with an Ohmic discharge current up to 1 MA. The expected electron density and temperature are, respectively, 2 × 10 19 m −3 and 800 eV. A combination of a stainless steel vacuum chamber and a thin copper shell (with a penetration time of 20 ms) surrounding the plasma provides an opportunity for studying resistive wall mode instabilities. The unique double-C design of the KTX vacuum vessel allows access to the interior of the KTX for easy first-wall modifications and investigations of power and particle handling, a largely unexplored territory in RFP research leading to demonstration of the fusion potential of the RFP concept. An active feedback mode control system is designed and will be implemented in the second phase of the KTX program. The recent progress of this program will be presented, including the design of the vacuum vessel, magnet systems and power supplies.

To find the optimal coils for stellarators, nonlinear optimization algorithms are applied in existing coil design codes. However, none of these codes have used the information from the second-order derivatives. In this paper, we present a modified Newton method in the recently developed code FOCUS. The Hessian matrix is calculated with analytically derived equations. Its inverse is approximated by a modified Cholesky factorization and applied in the iterative scheme of a classical Newton method. Using this method, FOCUS is able to recover the W7-X modular coils starting from a simple initial guess. Results demonstrate significant advantages.

No abstract

Abstract. The presence of error fields has been shown to degrade plasma confinement and drive instabilities. Error fields can arise from many sources, but are predominantly attributed to deviations in the coil geometry. In this paper, we introduce a Hessian matrix approach for determining error field sensitivity to coil deviations. A primary cost function used for designing stellarator coils, the surface integral of normalized normal field errors, was adopted to evaluate the deviation of the generated magnetic field from the desired magnetic field. The FOCUS code [Zhu et al., Nucl. Fusion 58(1):016008 (2018)] is utilized to provide fast and accurate calculations of the Hessian. The sensitivities of error fields to coil displacements are then determined by the eigenvalues of the Hessian matrix. A proof-of-principle example is given on a CNT-like configuration. We anticipate that this new method could provide information to avoid dominant coil misalignments and simplify coil designs for stellarators.

No abstract

Radio frequency (RF) heating in the ion cyclotron range of frequencies (ICRF) is one of the primary auxiliary heating methods for EAST. The ICRF system provides 6 MW power in primary phase and will be capable of 10 MW later. Three 1.5 MW ICRF systems in a frequency range of 25 MHz to 70 MHz have already been in operation. The ICRF heating launchers are designed to have two current straps with each driven by a RF power source of 1.5 MW. In this paper a brief introduction of the ICRF heating system capability in EAST and the preliminary results in EAST are presented.