Graphene with ultrahigh intrinsic strength and excellent thermal physical properties has the potential to be used as the reinforcement of many kinds of composites. Here, we show that very high tensile strength can be obtained in the copper matrix composite reinforced by reduced graphene oxide (RGO) when micro-layered structure is achieved. RGO-Cu powder with micro-layered structure is fabricated from the reduction of the micro-layered graphene oxide (GO) and Cu(OH)2 composite sheets, and RGO-Cu composites are sintered by spark plasma sintering process. The tensile strength of the 5 vol.% RGO-Cu composite is as high as 608 MPa, which is more than three times higher than that of the Cu matrix. The apparent strengthening efficiency of RGO in the 2.5 vol.% RGO-Cu composite is as high as 110, even higher than that of carbon nanotube, multilayer graphene, carbon nano fiber and RGO in the copper matrix composites produced by conventional MLM method. The excellent tensile and compressive strengths, high hardness and good electrical conductivity are obtained simultaneously in the RGO-Cu composites. The results shown in the present study provide an effective method to design graphene based composites with layered structure and high performance.
In YBCO coils, the increased transport current density and magnetic field will induce larger electromagnetic force, and YBCO coated conductors (CCs) may suffer interlayer delamination by shear forces, which may give rise to performance degradation of the conductor. The delamination characteristics of YBCO CCs under shear stress should be well understood for better application of YBCO tapes to high-temperature superconducting equipment. This paper describes the experimental results for different delamination strength and critical current I c degradation behaviors of the YBCO CCs under shear stress at the unslit edge, center, and slit edge of the conductor. The results show that the average delaminated shear strengths of 4.9, 5.9, and 3.7 MPa are recorded for the unslit edge, center, and slit edge at room temperature, whereas 6.8, 7.2, and 5.1 MPa are recorded for the unslit edge, center, and slit edge at liquid nitrogen. The different degradation behaviors of I c under shear stress are related to the location where delamination occurs in the sample. According to the finite-element method analysis for the stress distribution of the conductor under shear stress, stress concentration leads to initial delamination of the conductor. The decrease of moment arm is suggested to reduce the effect of moment on the delamination test.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.