2,7-Difluo-carbazole and 2,4,5,7-tetrafluoro-carbazole were synthesized as new building blocks of wide-energy-gap host material for phosphorescent organic light-emitting diodes (PHOLEDs). These fluorinated positions in the carbazole ring were determined on the basis of density functional theory calculation results. Spectroscopic analyses supported the hypothesis that poly(Nvinyl-2,7-difluoro-carbazole) (2,7-F-PVK) with the fluorinated pendant group possessed a wide energy gap, leading to the exciton energy confinement on the blue phosphorescent dopant as well as nonsubstituted poly(N-vinyl-carbazole) (PVK). 2,7-F-PVK was used in solution-processed blue PHOLED to achieve 27 cd/A at 760 cd/m 2 , which is 1.8 times higher than that of nonsubstituted PVK. We assumed that the replacement of nonsubstituted PVK with 2,7-F-PVK improved the charge balance in the emission layer, while keeping the exciton confinement effect. The fluorination of the carbazole ring is a useful molecular design strategy for wide-energy-gap host material.
We demonstrated high-brightness large-area, white organic lightemitting diode (OLED) consisting of printing-processed organic semiconductor layers. Meniscus printing process was applied to the substrate with 2 μm-high stripe-shape auxiliary electrodes. The OLED panel showed white emission all over the whole emitting area of 58 mm × 52 mm, high average luminance of 10,000 cd/m 2 , luminance uniformity of 40 %, and high luminous flux of 95 lm.
Highly transparent Cu2O thin films on transparent conducting oxide on a glass substrate were fabricated using reactive sputtering by carefully controlling the O2 flow. The impurity dependence of transmittance was thoroughly investigated, and the transmittance was found heavily depending on impurities in Cu2O thin films as confirmed by x-ray diffraction analysis. A highly transparent Cu2O thin film was fabricated using precisely impurity-controlled Cu2O thin films. The effects of impurities in a Cu2O thin film on photovoltaic properties were studied. A maximum efficiency of 8.4% was observed in the lowest-impurity Cu2O thin film.
We have developed an electrochemical reaction display (ECRD) that can be operated in dual reflective and emissive modes in an entire pixel area of a single device. The ECRD utilizes electrochromic (EC) and electrogenerated chemiluminescence (ECL) reactions. These two electrochemical reactions can be controlled independently by adding a luminescent molecule to a liquid electrolyte of an EC cell with three electrodes. In the reflective mode, the ECRD cell exhibits high reflectance (47%) and high contrast ratio (6:1). In the emissive mode, the cell can show luminescent moving images because of the fast response time (10 ms).
Host materials for phosphorescence organic light-emitting diodes (OLEDs) are required to have wide energy gap to prevent back energy transfer and confine triplet exciton on guest molecules. Carbazole (Cz) has been widely used as a building block for host materials because of its relatively high energy gap. We found that the energy gap of Cz can be widened by fluorination at specific positions. A characteristic of the energy gap widening by fluorination is its controllability by the number and position of fluorine substituents.We synthesized 2,7-difluorocarbazole (F-Cz) and estimated the energy gap of Cz and F-Cz from absorption spectra to be 3.59 eV and 3.71 eV, respectively. To confirm the wide-gap effect of F-Cz on OLED device, we synthesized a solution-processable polymer host, poly(N-vinyl-2,7-difluorocarbazole) (F-PVK), which has F-Cz as pendant groups, and compared it with poly(N-vinylcarbazole) (PVK). The OLED devices investigated consisted of an ITO/PEDOT:PSS/EML/CsF/Al multilayered structure. The poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) layer was spin-coated onto an indium tin oxide (ITO) coated glass substrate. Subsequently, the emission layer (EML) composed of PVK or F-PVK, 1,3-bis[(4-tertbutylphenyl)-1,3,4-oxidiazolyl]phenylene (OXD-7), and a blue phosphorescent dopant, iridium(III)bis [(4,6-difluorophenyl)-pyridinato-N,C2'] picolinate (FIrpic) was spin-coated, and the CsF and Al layers were vapor-deposited. The OLED device with F-PVK showed 1.8 times higher maximum current efficiency (27 cd/A) than that with PVK (15 cd/A). The improved efficiency of F-PVK device can be rationalized by the enhanced triplet confinement effect of polymer host composed of fluorinated carbazole.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.