The 2016 Kumamoto earthquake sequence started with a M J (Japan Meteorological Agency magnitude) 6.5 event on April 14, and culminated in a M J 7.3 event on April 16. Associated with the sequence, approximately 34-km-long surface ruptures appeared along the eastern part of the Futagawa fault zone and the northernmost part of the Hinagu fault zone. We carried out an urgent field investigation soon after the earthquake to map the extent and displacement of surface ruptures with the following results. (1) The rupture zone generally consisted of a series of left-stepping en echelon arrays of discontinuous fault traces of various lengths. (2) Slip exceeding 100 cm occurred on previously unrecognized fault traces in the alluvial lowland of the Kiyama plain and on the western rim of the Aso volcano caldera. (3) Large slip with maximum dextral slip of 220 cm was measured throughout the central section of the rupture zone along the Futagawa segment, and the slip gradually decreased bilaterally on the adjoining northeastern and southwestern sections. (4) The surface rupture mostly occurred along fault traces mapped in previous active fault investigations. (5) Most of the surface ruptures were produced by the mainshock, and significant postseismic slip occurred after the mainshock.

No abstract

The occurrence of mylonite and cataclasite, mineral assemblages of cataclasite, and the K-Ar ages of surrounding granitic rocks and dikes were studied to examine the possibility that the Hatagawa Fault Zone (HFZ), NE Japan was experienced under the conditions of the brittle-plastic transition. The Hatagawa Fault Zone is divided into three structural settings: mylonite zones with a sinistral sense of shear and a maximum thickness of 1 km, a cataclasite zone with a maximum thickness of about 100 m, and locally and sporadically developed small-scale shear zones. Occurrence of epidote and chlorite, lack of montmorillonite in cataclasite, and the coexistence of cataclasite and limestone mylonite suggest that the cataclasite was deformed at temperatures higher than 220• C. Crush zones in the mylonite near the cataclasite zone were recognized in one outcrop; they have a structure concordant with the surrounding mylonite and some fragments in them are dragged plastically. Granodiorite porphyry dikes near the HFZ intruding into cataclasite and mylonite with a sinistral sense of shear exhibit no deformational features. K-Ar ages of hornblende from host granitic rocks and from one granodiorite porphyry dike are 126 ± 6 to 95.7 ± 4.8 and 98.1 ± 2.5 Ma, respectively. These indicate that the fault activity gradually changed from mylonitization to cataclasis within 28 m.y., and suggest that the HFZ underwent a brittle-plastic transition during its activity.

No abstract

No abstract

Rock alteration and geochemistry of the fault rocks are examined to infer the characteristics of the fluid phase related to the ancient fault activity. The Hatagawa Fault Zone, northeast Japan, is an exhumed seismogenic zone which is characterized by close association of brittlely and plastically deformed fault rocks mostly derived from Cretaceous granitoids. Epidote and chlorite are dominant alteration minerals in both rocks. However, calcite is characteristically developed in the cataclastic part only. Decrease in oxygen isotope ratio and existence of epidote and chlorite, even in weakly deformed granodiorite, is evidence of water-rock interaction. The water/rock ratio is interpreted to be relatively small and fluid chemistry is buffered by host rock chemistry in the mylonite. The occurrence of calcite in brittle structures is explained by changes in water chemistry during shear zone evolution. CO 2 -rich fluid was probably introduced during cataclastic deformation and increased CO 2 concentration resulted in precipitation of calcite.

A new model for growth of plastic shear zone is proposed based on the basis of a theory of fluid dynamics coupled with a rheological constitutive function, and is applied to a natural shear zone. Mylonite, ultramylonite and other ductile fault rocks are well known to deform in a plastic flow regime. The rheological behavior of these kinds of rocks has been well documented as a non-linear viscous body, which is empirically described aṡ γ = Aτ n exp(−Q/RT ), whereγ : strain rate, τ : shear stress, Q: activation energy, R: universal gas constant, T : absolute temperature, and A and n are constants. Strain rate-and temperature-dependent viscosity is obtained by differentiating the equation, and simplified by substituting n = 1. Then, substitution of the equation into a diffusion1/2 , where δ: thickness of active layer of viscous deformation, ν: kinematic viscosity, and ρ: density. The duration of creep deformation along the ancient plastic shear zone (thickness: 0.076 m) is estimated to be around 760 s, in a temperature range from 300 to 500• C. This estimation is rather good agreement with intermittent creep during inter-seismic period, than steady state creep or co-seismic slip.

Chemical species of iron and sulfur were measured using 57 Fe Mössbauer spectroscopy and X-ray near edge structure, respectively, for the fault gouge samples collected from two sites along the ENE-WSW trending Ushikubi fault zone in central Japan. These gouge samples have distinguishable variations in their physical properties such as surface color and structure and these features are also reflected by the chemical speciation of iron and sulfur. Newly formed minerals, including calcite, dolomite, siderite, iron sulfide and pyrite, have close relation to the colors of fault gouge and respective to the geochemical environment within the fault zone. In addition, the variations in iron and sulfur species may have significance to evaluate G. Zheng et al. the redox conditions in the fractures and furthermore to estimate the history and activity of the faults. Generally there is observacious enrichment of reducing species of iron and sulfur as well as chlorite in the relatively younger fracture, indicating favorable connection pathway with deep position and the fault zone is active. On the other hand, the stable fracture with a longer history is relatively enriched in ferric iron species and almost no sulfur in the gouge. These results from iron and sulfur speciation have a good agreement with evidence indicated by 14 C dating from this fault zone.