A freestanding, binder-free flexible polypyrrole: polystyrene sulfonate/cellulose nanopaper (PPy:PSS/CNP) electrode is successfully fabricated by a low-cost, simple, and fast vacuum filtration method for the first time. The hierarchical structure of CNP with high surface area and good mechanical strength not only provides a high electroactive region and shortens the diffusion distance of electrolyte ions, but also mitigates the volumetric expansion/shrinkage of the PPy during the charging/discharging process. The optimized PPy:PSS/CNP exhibits a high areal specific capacitance of 3.8 F cm −2 (corresponding to 475 F cm −3 and 240 F g −1 ) at 10 mV s −1 and good cycling stability (80.9% capacitance retention after 5000 cycles). The cyclic voltammetry curves of PPy:PSS/CNP at different bending angles indicate prominent flexibility and electrochemical stability of the electrode. Moreover, a symmetric supercapacitor device is assembled and delivers a high areal energy density of 122 μW h cm −2 (15 W h cm −3 ) at a power density of 4.4 mW cm −2 (550 mW cm −3 ), which is superior to other cellulose-based materials. The combination of high supercapacitive performance, flexibility, easy fabrication, and cheapness of the PPy: PSS/CNP electrodes offers great potential for developing the next generation of green and economical portable and wearable consumer electronics.

No abstract

Ionic polymer–metal composites (IPMC)—constructed using an ionic polymer sandwiched between metal electrodes—have shown great potential for the fabrication of soft actuators. IPMC architectures have many advantages including low actuation voltage, fast response, basic control, and relatively light weight. Poly(acrylic acid) (PAA)‐based ion exchange membranes are of particular interest for IPMC devices due to their large ion exchange capacity and ease of preparation; however, they suffer from relatively weak mechanical strength. Here, PAA‐based soft actuators are synthesized with enhanced mechanical properties and proton conductivity through the incorporation of hydrogen bonding interactions with imidazolium groups via copolymerization with 1‐vinylimidazole. In addition to examining the impact of composition on physiochemical (swelling, glass transition, decomposition, Young's modulus, etc.) and electrochemical (specific capacitance) properties, an additive manufacturing process, digital light projection (DLP), is utilized to fabricate complex geometries demonstrating the potential for the fabrication of IPMC devices with complex actuation modalities. Planar DLP 3D‐printed IPMC actuators of varied polymer compositions are fabricated with activated carbon and copper electrodes, and their actuation performance is evaluated in air, where large bending deformation is observed (14°–37°).

Background Rice-fish symbiosis, as an ecological and green aquaculture model, is an effective measure to relieve the environmental stress from intensive aquaculture. Compared with traditional aquaculture, the altered rearing pattern and environment will make differences in muscle nutrient and quality, intestinal microbiota, body metabolism, and even disease resistance in fish. Results To investigate this, we explored the differences between rice-tilapia (aRT and bRT) and tank-tilapia (aTT and bTT) models at the periods before and after rice flowering using 16S rRNA sequencing and untargeted metabolomics. The results showed that compared with tilapia reared in the tank model, the fish body length and weight, the muscle total umami amino acid, and monounsaturated fatty acid content were obviously higher in the rice-fish model, especially after rice flowering. Compared with other groups, the intestinal microbiota diversity of fish in the bRT group was significantly higher; the dominant microbiota was Bacteroidetes and Firmicutes at the phylum level, Bacteroides and Turicibacter at the genus level, and the relative abundances of Gram-negative, potentially pathogenic, and stress-tolerant bacteria were the highest, lowest, and highest, respectively. Besides, the differential metabolite analysis indicated that rice-fish symbiosis improved the metabolic profiles and modulated the metabolic pathways in tilapia. Moreover, the correlation analysis of 16S sequencing and metabolomics showed that Bacteroides showed a positive correlation with many metabolites related to amino acid, fatty acid, and lipid metabolism. Conclusions In summary, rice flowering improves the tilapia muscle nutrient, intestinal microbiota diversity, and disease resistance and modulates the host metabolism to acclimatize the comprehensive environment in rice-fish symbiosis. Specifically, rice flowering alters the microbiota abundance involved in amino acid, fatty acid, and lipid metabolism, resulting in improving the muscle nutrient and quality through the crosstalk of gut microbial and host metabolism. Our study will provide not only new insight into the gut microbiota-metabolism-phenotype axis, but also strong support for the promotion and application of rice-fish symbiosis in aquaculture.

Recently, the strategy of combining carbon-based materials with metal oxides to enhance the electrochemical performance of electrodes has been a topic of great interest, but research focusing on the growth and charge storage mechanisms of such hybrid electrodes has rarely been conducted. In this work, a simple, reproducible, low-cost, and fast microwave heating method was used to synthesize NiOx@graphene nanocomposites. NiOx@graphene nanocomposites were used as a model system for exploring the growth and charge storage mechanisms of the hybrid electrode materials due to their simple preparation process, good stability, low cost, and high specific capacitance. The effects of reaction conditions (the type of metal precursor and feeding ratio between the nickel precursor and graphene) on the formation mechanism of the electrodes were examined, and it was demonstrated that the microstructure and morphology of the electrode materials were metal precursor-dependent, which was directly related to the electrochemical performance of the electrodes. Our work provides a new affordable approach to the synthesis of, and experimental support for designing, hybrid electrode architectures with a high electrochemical performance for next-generation energy storage devices.