No abstract

No abstract

Metal-organic framework (MOF)-derived nanoporous carbons (NPCs) and porous metal oxide nanostructures or nanocomposites have gathered considerable interest due to their potential use in supercapacitor (SCs) applications, owing to their precise control over porous architectures, pore volumes, and surface area. Bimetallic MOFs could provide rich redox reactions deriving from improved charge transfer between different metal ions, so their supercapacitor performance could be further greatly enhanced. In this study, “One-for-All” strategy is adopted to synthesize both positive and negative electrodes for hybrid asymmetric SCs (ASCs) from a single bimetallic MOF. The bimetallic Zn/Co-MOF with cuboid-like structures were synthesized by a simple method. The MOF-derived nanoporous carbons (NPC) were then obtained by post-heat treatment of the as-synthesized Zn/Co-MOF and rinsing with HCl, and bimetallic oxides (ZnCo 2 O 4 ) were achieved by sintering the Zn/Co-MOF in air. The as-prepared MOF-derived NPC and bimetallic oxides were utilized as negative and positive materials to assemble hybrid ASCs with 6 M KOH as an electrolyte. Owing to the matchable voltage window and specific capacitance between the negative (NPC) and positive (ZnCo 2 O 4 ), the as-assembled ASCs delivered high specific capacitance of 94.4 F/g (cell), excellent energy density of 28.6 Wh/kg at a power density of 100 W/kg, and high cycling stability of 87.2% after 5,000 charge-discharge cycles. This strategy is promising in producing high-energy-density electrode materials in supercapacitors.

Molybdenum (Mo) doped BiVO4 was fabricated via a simple electrospun method. Morphology, structure, chemical states and optical properties of the obtained catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), N2 adsorption–desorption isotherms (BET) and photoluminescence spectrum (PL), respectively. The photocatalytic properties indicate that doping Mo into BiVO4 can enhance the photocatalytic activity and dark adsorption ability. The photocatalytic test suggests that the 1% Mo-BiVO4 shows the best photocatalytic activity, which is about three times higher than pure BiVO4. Meanwhile, 3% Mo-BiVO4 shows stronger dark adsorption than pure BiVO4 and 1% Mo-BiVO4. The enhancement in photocatalytic property should be ascribed to that BiVO4 with small amount of Mo doping could efficiently separate the photogenerated carries and improve the electronic conductivity. The high concentration doping would lead the crystal structure transformation from monoclinic to tetragonal phase, as well as the formation of MoO3 nanoparticles on the BiVO4 surface, which could also act as recombination centers to decrease the photocatalytic activity.

No abstract

No abstract

High-performance electrocatalysts for the oxygen reduction reaction (ORR) are essential in electrochemical energy storage and conversion technologies. Fe-N-C electrocatalysts have been developed as one of the most promising alternatives to precious metal materials. Current M-N-C electrocatalysts usually are derived from high-temperature thermal treatment of a nitrogen-containing polymer or metal–organic frameworks (MOFs). Here, we developed Fe-N-C mesoporous nanofibers with low-cost urea and FeCl3 as the nitride and iron source; the electrocatalysts with abundant Fe-Nx active sites and large surface area were synthesized via electrospinning, in situ pyrolysis, and acid treatment process. The use of sealing conditions in the calcination process can effectively improve the nitrogen species content in the catalyst, which is important for improving performance. The as-prepared electrocatalyst material manifests well electrocatalytic performance for ORR in alkaline electrolyte (onset potential of 0.93 V and half-wave potential of 0.82 V); meanwhile, the electrocatalyst expresses good stability and methanol tolerance. This work may provide new thought for developing high-performance ORR electrocatalysts.Electronic supplementary materialThe online version of this article (10.1186/s11671-018-2635-x) contains supplementary material, which is available to authorized users.

No abstract