Droplet microfluidics generates and manipulates discrete droplets through immiscible multiphase flows inside microchannels. Due to its remarkable advantages, droplet microfluidics bears significant value in an extremely wide range of area. In this review, we provide a comprehensive and in-depth insight into droplet microfluidics, covering fundamental research from microfluidic chip fabrication and droplet generation to the applications of droplets in bio(chemical) analysis and materials generation. The purpose of this review is to convey the fundamentals of droplet microfluidics, a critical analysis on its current status and challenges, and opinions on its future development. We believe this review will promote communications among biology, chemistry, physics, and materials science.

Natural structural color materials, especially those that can undergo reversible changes, are attracting increasing interest in a wide variety of research fields. Inspired by the natural creatures, many elaborately nanostructured photonic materials with variable structural colors were developed. These materials have found important applications in switches, display devices, sensors, and so on. In this critical review, we will provide up-to-date research concerning the natural and bio-inspired photonic materials with variable structural colors. After introducing the variable structural colors in natural creatures, we will focus on the studies of artificial variable structural color photonic materials, including their bio-inspired designs, fabrications and applications. The prospects for the future development of these fantastic variable structural color materials will also be presented. We believe this review will promote the communications among biology, bionics, chemistry, optical physics, and material science (196 references).

Structural color materials from existing natural organisms have been widely studied to enable artificial manufacture. Variable iridescence has attracted particular interest because of the displays of various brilliant examples. Existing synthetic, variable, structural color materials require external stimuli to provide changing displays, despite autonomous regulation being widespread among natural organisms, and therefore suffer from inherent limitations. Inspired by the structural color regulation mechanism of chameleons, we present a conceptually different structural color material that has autonomic regulation capability by assembling engineered cardiomyocyte tissues on synthetic inverse opal hydrogel films. The cell elongation and contraction in the beating processes of the cardiomyocytes caused the inverse opal structure of the substrate film to follow the same cycle of volume or morphology changes. This was observed as the synchronous shifting of its photonic band gap and structural colors. Such biohybrid structural color hydrogels can be used to construct a variety of living materials, such as two-dimensional selfregulating structural color patterns and three-dimensional dynamic Morpho butterflies. These examples indicated that the stratagem could provide an intrinsic color-sensing feedback to modify the system behavior/action for future biohybrid robots. In addition, by integrating the biohybrid structural color hydrogels into microfluidics, we developed a "heart-on-a-chip" platform featuring microphysiological visuality for biological research and drug screening. This biohybrid, living, structural color hydrogel may be widely used in the design of a variety of intelligent actuators and soft robotic devices.

CONSPECTUS: Colloidal photonic crystals (PhCs), periodically arranged monodisperse nanoparticles, have emerged as one of the most promising materials for light manipulation because of their photonic band gaps (PBGs), which affect photons in a manner similar to the effect of semiconductor energy band gaps on electrons. The PBGs arise due to the periodic modulation of the refractive index between the building nanoparticles and the surrounding medium in space with subwavelength period. This leads to light with certain wavelengths or frequencies located in the PBG being prohibited from propagating. Because of this special property, the fabrication and application of colloidal PhCs have attracted increasing interest from researchers. The most simple and economical method for fabrication of colloidal PhCs is the bottom-up approach of nanoparticle self-assembly. Common colloidal PhCs from this approach in nature are gem opals, which are made from the ordered assembly and deposition of spherical silica nanoparticles after years of siliceous sedimentation and compression. Besides naturally occurring opals, a variety of manmade colloidal PhCs with thin film or bulk morphology have also been developed. In principle, because of the effect of Bragg diffraction, these PhC materials show different structural colors when observed from different angles, resulting in brilliant colors and important applications. However, this angle dependence is disadvantageous for the construction of some optical materials and devices in which wide viewing angles are desired. Recently, a series of colloidal PhC materials with spherical macroscopic morphology have been created. Because of their spherical symmetry, the PBGs of spherical colloidal PhCs are independent of rotation under illumination of the surface at a fixed incident angle of the light, broadening the perspective of their applications. Based on droplet templates containing colloidal nanoparticles, these spherical colloidal PhCs can be generated by evaporation-induced nanoparticle crystallization or polymerization of ordered nanoparticle crystallization arrays. In particular, because microfluidics was used for the generation of the droplet templates, the development of spherical colloidal PhCs has progressed significantly. These new strategies not only ensure monodispersity, but also increase the structural and functional diversity of the PhC beads, paving the way for the development of advanced optoelectronic devices. In this Account, we present the research progress on spherical colloidal PhCs, including their design, preparation, and potential applications. We outline various types of spherical colloidal PhCs, such as close-packed, non-close-packed, inverse opal, biphasic or multiphasic Janus structured, and core-shell structured geometries. Based on their unique optical properties, applications of the spherical colloidal PhCs for displays, sensors, barcodes, and cell culture microcarriers are presented. Future developments of the spherical colloidal PhC materials are also envisioned.

Facile, fast, and cost-effective technology for patterning of responsive colloidal photonic crystals (CPCs) is of great importance for their practical applications. In this report, we develop a kind of responsive CPC patterns with multicolor shifting properties by inkjet printing mesoporous colloidal nanoparticle ink on both rigid and soft substrates. By adjusting the size and mesopores' proportion of nanoparticles, we can precisely control the original color and vapor-responsive color shift extent of mesoporous CPC. As a consequence, multicolor mesoporous CPCs patterns with complex vapor responsive color shifts or vapor-revealed implicit images are subsequently achieved. The complicated and reversible multicolor shifts of mesoporous CPC patterns are favorable for immediate recognition by naked eyes but hard to copy. This approach is favorable for integration of responsive CPCs with controllable responsive optical properties. Therefore, it is of great promise for developing advanced responsive CPC devices such as anticounterfeiting devices, multifunctional microchips, sensor arrays, or dynamic displays.

Inspired by the coordinated multiple healing mechanism of the organism, a four‐armed benzaldehyde‐terminated polyethylene glycol and dodecyl‐modified chitosan hybrid hydrogel with vascular endothelial growth factor (VEGF) encapsulation are presented for efficient and versatile wound healing. The hybrid hydrogel is formed through the reversible Schiff base and possesses self‐healing capability. As the dodecyl tails can insert themselves into and be anchored onto the lipid bilayer of the cell membrane, the hybrid hydrogel has outstanding tissue adhesion, blood cell coagulation and hemostasis, anti‐infection, and cell recruitment functions. Moreover, by loading in and controllably releasing VEGF from the hybrid hydrogel, the processes of cell proliferation and tissue remodeling in the wound bed can be significantly improved. Based on an in vivo study of the multifunctional hybrid hydrogel, it is demonstrated that acute tissue injuries such as vessel bleeding and liver bleeding can be repaired immediately because of the outstanding adhesion and hemostasis features of the hydrogel. Moreover, the chronic wound‐healing process of an infectious full‐thickness skin defect model can also be significantly enhanced by promoting angiogenesis, collagen deposition, macrophage polarization, and granulation tissue formation. Thus, this multifunctional hybrid hydrogel is potentially valuable for clinical applications.

Bioinspired multicompartmental microfibers are generated by novel capillary microfluidics. The resultant microfibers possess multicompartment body-and-shell compositions with specifically designed geometries. Potential use of these microfibers for tissue-engineering applications is demonstrated by creating multifunctional fibers with a spatially controlled encapsulation of cells.

Versatile chambers: A microfluidic technique is used to generate polymersomes with multiple compartments using double emulsions with different morphology as templates (see scheme). The polymersomes could be utilized for encapsulation of multiple substances and as reaction vessels that enable triggered reaction with controlled stoichometry of the reactants.