We propose and demonstrate a novel and compact optical-fiber temperature sensor with a high sensitivity and high figure of merit (FOM) based on surface plasmon resonance (SPR). The sensor is fabricated by employing a single-mode twin-core fiber (TCF), which is polished as a circular truncated cone and coated with a layer of gold film and a layer of polydimethylsiloxane (PDMS). Owing to the high refractive index sensitivity of SPR sensors and high thermo-optic coefficient of PDMS, the sensor realizes a high temperature sensitivity of -4.13 nm/°C to -2.07 nm/°C in the range from 20°C to 70°C, transcending most other types of optical-fiber temperature sensors. Owing to the fundamental mode beam transmitting in the TCF, the sensor realizes a high FOM of up to 0.034/°C, more than twice that of SPR sensors based on multimode fiber. The proposed temperature sensor is meaningful and will have potential applications in many fields, such as biomedical and biomaterial.
We propose and demonstrate a novel surface plasmon resonance (SPR)-sensing approach by using the fundamental mode beam based on a twin-core fiber (TCF). Although normally in a fiber SPR sensor, a multimode fiber (MMF) has often been used to improve the coupling efficiency; for improving fiber SPR sensor sensitivity, single-mode beam is optimal. We provide a novel method to employ the single (fundamental)-mode beam to SPR sense based on the TCF. We grind the TCF tip to be a frustum wedge shape, and plate a 50-nm sensing gold film on the end face, and two 500-nm reflected gold films on the side faces of the wedge tip. By using this new configuration, we reduce the mode noise effectively and get a high testing sensitivity (the testing highest sensitivity reaches to 6463 nm/RIU). This SPR probe can be applied in a microfluidic chip and monitors the refractive index (RI) charges of the flow liquid in the microfluidic channel in real-time. The probe successfully monitors the refractive index of liquid ranged from 1.3333 to 1.3706, and the average sensitivity reaches to 5213 nm/RIU in the solution, which is much higher than most multimode SPR systems.
We propose and demonstrate a hybrid fiber-based sensor combining a multimode interference (MMI) structure and a surface plasmon resonance (SPR) structure for simultaneous measurement of temperature and refractive index (RI) of a liquid sample. We configure the MMI structure by connecting a single-mode fiber, a no-core fiber, and a single-mode fiber sequentially. We set up the SPR structure by coating a gold film with a thickness of 50 nm on the surface of the no-core fiber. We measure the sensitivity of RI and the temperature of the MMI and SPR structure, respectively. Then we obtain the coefficient matrix to simultaneously measure the temperature and RI of a liquid sample and obtain the highest RI sensitivity of 2061.6 nm/RIU and temperature sensitivity of 37.9 pm/°C. We verify the feasibility of the sensor in liquid alcohol. The testing results indicate that the proposed sensor and testing method are feasible, accurate, and convenient.
We demonstrate trapped yeast cell axial-position adjustment without moving the optical fiber in a single-fiber optical trapping system. The dynamic axial-position adjustment is realized by controlling the power ratio of the fundamental mode beam (LP01) and the low-order mode beam (LP11) generated in a normal single-core fiber. In order to separate the trapping positions produced by the two mode beams, we fabricate a special fiber tapered tip with a selective two-step method. A yeast cell of 6 μm diameter is moved along the optical axis direction for a distance of ~3 μm. To the best of our knowledge, this is the first demonstration of the trapping position adjustment without moving the fiber for single-fiber optical tweezers. The excitation and utilization of multimode beams in a single fiber constitutes a new development for single-fiber optical trapping and makes possible more practical applications in biomedical research fields.
We propose and demonstrate a distributed surface plasmon resonance (SPR) fiber sensor based on a novel, simple, and effective incident angle adjusting method. For normal fiber SPR sensors, it is hard to realize distributed sensing because it is hard to produce two dynamic ranges (resonance wavebands) with a great difference. The dynamic range depends on the incident angle, and therefore, we propose an incident angle adjusting method that is implemented by grinding an eccentric-core fiber to different angles, which helps to produce different SPR wavebands with great difference, thus realizing distributed sensing. In our two cascaded distributed configuration, with the refractive index range of 1.333-1.385, the fiber grind angles are 9° and 17°, the testing wavelength ranges are 613-760 nm and 745-944 nm, and the average testing sensitivities are 2826 nm/RIU and 4738 nm/RIU, respectively. Larger resonance wavelengths are associated with larger testing sensitivities. This distributed fiber sensor has important significance in the fields of multichannel liquid refractive indices and temperature self-reference measurements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.