The article analyzes the design features of existing flamethrowers of former Soviet Union, Russian and foreign manufacture. It is determined that the infantry rocket flamethrower can perform only a single action. A flamethrower consists of a disposable container - launcher with an aiming device in which a thermobaric warhead and a jet engine are mounted, which are separated during the shot. The shot is carried out using a launching machine attached to the disposable container - launcher. The selection of an analogue product that meets the requirements for an advanced domestic flamethrower in terms of tactical and technical characteristics was made. Analysis of the design of existing systems showed that the closest to the conditions of the technical - development requirements in terms of technical and weight-and-dimensional characteristics is RPO-A "Shmel", thus it was chosen as a prototype during the development of a domestic infantry flamethrower. The main features of the damage effects are analyzed. The main adverse factors of thermobaric warheads are determined. They are: maximum pressure, shock-wave velocity, action time of excess pressure. In the process of designing a new rocket flamethrower in order to increase the adverse factors indicators, the following decisions were made: to use nitrate ester with a lower oxygen balance, incapable of detonation transformation - isoamyl nitrite; to use an explosive of bursting charge with a higher detonation rate - okfol. Experimental studies have confirmed that the developed infantry rocket flamethrower does not rank below the world analogues, and in terms of particular characteristics (damage effects) even exceeds those analogues.
The article analyzes the approaches to the creation of mathematical models focused on determining the failure-free factors of unmanned aerial systems during their operation. It is noted that many economic and social processes can be narrowed down to the problem of the choice made by their participants between several alternative (mutually exclusive or competing) options. Examples include the problem of consumer behavior in a competitive market in which the consumer makes investment decisions in the context of choosing between several alternative projects; selection of possible transport systems for passenger and сargo transportation; choosing among alternative opportunities for the economic growth of territories, decision-making in speculative financial markets (using instruments to buy for a rise or sell short) and others. To ensure the possibility of determining the predicted failure-free factors at the stage of performance evaluation by methods of functional and structural analysis, a mathematical model of the process of determining failure-free factors was developed, focused on the use of dynamic Bayesian belief networks. The proposed model takes into account the Markovian character of the operation process running, in which failures of elements and subsystems are compensated by actions to restore the system. The failure rates of UAS during performance evaluation, as well as the average integral value survival rate for the period of performance evaluation, the rate of occurrence of failures and time to failure are determined as the final failure-free factors. The model is evaluated as a necessary condition for further development of specially configured software to solve the problem of determining failure-free factors of unmanned aerial systems.
Брайко В.В., Сподін О.І., Скляр В.Г. Товариство з обмеженою відповідальністю -Наукововиробнича фірма -Адрон‖ Камак Ю.О., Нікітченко В.І. Державний науково-дослідний інститут випробувань і сертифікації озброєння та військової техніки ОСОБЛИВОСТІ ФУНКЦІОНУВАННЯ ТА РОЗРОБКИ ТЕРМОБАРИЧНИХ БОЄПРИПАСІВ У статті акцентовано увагу на особливості функціонування термобаричних вибухових речовин. Показано основні переваги та недоліки термобаричних вибухових речовин різних поколінь. Проведено оцінку стадій вибух термобаричних зарядів. Проаналізовано характер навантаження при оцінці уражаючої дії термобаричних вибухових речовин. Визначено, що характер навантаження пов'язаний зі співвідношенням тривалості фази стискання в ударній хвилі та періоду власних коливань об'єкта. Ключові слова: уражаюча дія, оцінка функціонування, термобаричні вибухові речовини. Постановка проблемиЗастосування будь-яких боєприпасів при виконанні поставлених бойових завдань повністю визначається показником їх бойової ефективності, в якості якого може виступати ймовірність виконання бойового завдання або рівень нанесеного збитку.Однією з основних характеристик будь-яких боєприпасів, що безпосередньо впливають на зазначені показники, є тип бойової частини і тип вибухової речовини, яка застосовується у бойовій частині. Характеристики бойової частини і вибухових речовин є взаємозалежними величинами.За характеристиками уражаючої дії бойові частини класифікуються як кінетичні, запальні, осколкові, фугасні, кумулятивні, термобаричні, спеціального призначення, а також їх комбінації (наприклад, осколково-фугасні і т.д.) [1].Відповідно, залежно від виду уражаючої дії бойова частина споряджається певною вибуховою речовиною, що дає максимальний ефект на визначені типові цілі. З метою оцінки (уточнення) уражаючої дії боєприпасів з термобаричними вибуховими речовинами та ефективного їх застосування доцільно розглянути питання особливостей функціонування та розробки термобаричних боєприпасів.Аналіз останніх досліджень і публікацій та виклад основного матеріалу Вибухові речовини -це хімічні сполуки або суміші речовин, здатні до швидкої хімічної реакції, що супроводжується виділенням великої кількості тепла та утворенням газів. Ця реакція, яка виникла в результаті нагрівання, удару, тертя, вибуху іншої вибухової речовини або зовнішнього впливу, поширюється по заряду за рахунок передачі енергії від шару до шару за допомогою процесів тепло-і масового переносу (горіння) чи ударної хвилі (детонації).Швидкість горіння різних вибухових речовин коливається від десятих мм/с до десятків і сотень м/с, швидкість детонації може перевищувати 9000 м/с. Вибуховими речовинами можуть бути конденсовані (тверді й рідкі) речовини, гази, а також суспензії часток твердих або рідких речовин у газах [2].Реакція детонації відбувається так швидко, що газоподібні продукти з температурою у кілька тисяч градусів виявляються стислими в обсязі, близькому до вихідного обсягу заряду, до тисків у десятки Гн/м 2 (сотні тисяч кгс/см 2 ). Різко розширюючись, стиснений газ наносить по навколишньому середови...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.