Conventional modular multilevel converters (MMCs) are widely used in high power applications due to their various astonishing advantages; however, they fail to achieve balanced capacitor voltage in DC operation. In this paper, a hybrid two-stage modular DC-DC converter is proposed to solve the issue of unbalanced capacitor voltages. The proposed converter consists of a singlephase half-bridge MMC with half-bridge submodules followed by a medium voltage valves-based H-bridge rectifier. The proposed converter is used in medium-voltage applications such as feeding a DC-load or interconnection between two DC grids of different voltage levels. The proposed configuration achieves successful DC-DC conversion with a low number of switches, a high conversion ratio with bidirectional power flow, low current stresses, soft switching across the second stage, and low switching losses. The operational concept and the control algorithm have been illustrated in detail. Finally, the effectiveness of the proposed DC-DC converter is evaluated based on simulation studies of MATLAB SIMULINK and a scaled-down laboratory experimental test rig.
Multi-terminal high voltage DC transmission currently represents a leading technology in longdistance power transmission systems. Among the main technical challenges facing such technology, DC fault isolation, permitting different grounding schemes, providing interoperability, and high DC voltage stepping between different HVDC networks, and allowing high-speed power reversal without power interruption especially when connecting the pre-existing voltage source converters (VSC) and line commutated converters (LCC)-based HVDC networks. This paper introduces a new modular multilevel converter (MMC) based front-to-front DC-DC converter to interconnect two different types (LCC/VSC) of HVDC networks. The proposed topology comprises a voltage source MMC (VS-MMC) and a current source MMC (CS-MMC), while both are coupled via an AC link including the isolating transformer. The proposed topology can successfully provide an uninterruptible bi-directional power flow, high DC voltage stepping with a DC fault blocking capability, and low number of semiconductors due to the usage of only half-bridge SMs. The system design is provided with a detailed mathematical analysis. Furthermore, two active power control methodologies are proposed and compared. The first control technique is simpler and entails lower passive elements, while the second technique ensures a zero reactive power over the full range of active power flow. Furthermore, Losses analysis and comparison are provided between the two proposed control techniques. Finally, Control-Hardware-in-the-Loop (CHiL) test validation is employed to confirm the validity of the proposed system under healthy as well as different fault scenarios.INDEX TERMS Modular multilevel converter, DC-DC power converters, HVDC, Power control, Bidirectional power flow, Control-Hardware-in-the-Loop (CHiL).
This paper proposes a multiport DC-DC converter for EV fast-charging stations. The proposed converter is comprised of Ring-Connected Dual Active Bridge (RCDAB) DC-DC converters, where the connection point between every two adjacent DABs provides a DC port. Bypass switches are added to each DAB to eliminate unnecessary power processing stages in the event of idle ports (no EVs) (open circuit ports). The nature of the ring connection of the RCDAB theoretically allows infinite internal power flow solutions within the ring to satisfy a certain power flow scenario at the DC ports, hence, the optimal power flow solution can be selected to minimize total RMS current and losses. Single-phase shift control is applied to this optimization problem to make it simple. A novel closed-loop control scheme using Bisection optimization is developed to minimize the total RMS current. A control-hardware-in-the-loop (CHiL) validation is carried out for a 5-port network of the proposed topology to investigate the converter efficiency and fault tolerance/availability characteristics. Also, an experimental hardware validation is implemented for a 3-port network where different scenarios for power flow and faults are performed. Finally, a comparative discussion between the proposed topology and other multiport topologies in literature is presented revealing the superior performance of the RCDAB topology.INDEX TERMS Dual active bridge (DAB), DC-DC multiport converter, electric vehicle (EV), fast charging, ring-connected DAB (RCDAB), single phase shift (SPS) control.
Nowadays, most of the converters used in high-power high-voltage (HV) applications are the conventional modular multilevel converters (MMC). However, in the case of DC-DC conversion, an imbalance of the capacitor voltages occurs and the conventional MMC fails to operate correctly. This paper introduces an arm current reversal-based modular multilevel DC-DC converter, which successfully provides balance among the capacitor voltages while operating in DC-DC conversion. The proposed configuration is used in medium voltage DC grids to feed DC loads or to interconnect between two DC grids of different voltage levels. The proposed converter is a two-stage DC-DC modular converter, which consists of a single-phase half-bridge MMC with half-bridge submodules (HBMMC) followed by a single-phase H-bridge MMC with half-bridge submodules (SMs). The operational concept of the proposed converter is based on reversing the arm current direction and reversing the output terminals with the help of the H-bridge MMC stage, which ensures the same direction of the voltage at the load terminals. The proposed converter provides a high conversion ratio, bidirectional power flow, simple architecture, and a simple control scheme. Detailed illustrations, analysis, and design of the proposed converter are presented. Besides, MATLAB-based and Opal RT-based simulation results and experimental results are presented to validate the proposed configuration claims. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.