In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.

Fast, simple, cost-efficient, eco-friendly, and design-flexible patterning of highquality graphene from abundant natural resources is of immense interest for the mass production of next-generation graphene-based green electronics. Most electronic components have been manufactured by repetitive photolithography processes involving a large number of masks, photoresists, and toxic etchants; resulting in slow, complex, expensive, less-flexible, and often corrosive electronics manufacturing processes to date. Here, a one-step formation and patterning of highly conductive graphene on natural woods and leaves by programmable irradiation of ultrafast high-photon-energy laser pulses in ambient air is presented. Direct photoconversion of woods and leaves into graphene is realized at a low temperature by intense ultrafast light pulses with controlled fluences. Green graphene electronic components of electrical interconnects, flexible temperature sensors, and energy-storing pseudocapacitors are fabricated from woods and leaves. This direct graphene synthesis is a breakthrough toward biocompatible, biodegradable, and ecofriendlily manufactured green electronics for the sustainable earth.

Noncontact electronic skin (e-skin), which possesses superior long-range and high-spatial-resolution sensory properties, is becoming indispensable in fulfilling the emulation of human sensation via prosthetics. Here, we present an advanced design and fabrication of all-graphene-based highly flexible noncontact e-skins by virtue of femtosecond laser direct writing (FsLDW). The photoreduced graphene oxide patterns function as the conductive electrodes, whereas the pristine graphene oxide thin film serves as the sensing layer. The as-fabricated e-skins exhibit high sensitivity, fast response-recovery behavior, good long-term stability, and excellent mechanical robustness. In-depth analysis reveals that the sensing mechanism is attributed to proton and ionic conductivity in the low and high humidity conditions, respectively. By taking the merits of the FsLDW, a 4 × 4 sensing matrix is facilely integrated in a single-step, eco-friendly, and green process. The light-weight and in-plane matrix shows high-spatial-resolution sensing capabilities over a long detection range in a noncontact mode. This study will open up an avenue to innovations in the noncontact e-skins and hold a promise for applications in wearable human-machine interfaces, robotics, and bioelectronics.

No abstract

Flexible and stretchable strain sensors are in great demand for many applications like wearables and home health. This work reports a strain sensor fabricated using aerosol jet printing technology on a commercially available bandage to be used as a low-cost wearable. Laser light is explored to sinter the silver nanoparticle ink on low-temperature bandage substrate. The laser parameters, their effects on the microstructure of the film, and the resulting sensor performance are systematically investigated. The results showed that the sensor is stretchable, has good sensitivity, and stability for 700 cycles of repeated bending.