By the utilization of new fine particles, steels refining the heat affected zone (HAZ) structure have been developed. This has made possible the mass-production of offshore structural steels which have high-strength of 460–500N/mm2 in yield strength (YS) and excellent crack-tip opening displacement (CTOD) properties. These newly developed steels for offshore structures have been mass-production to over 45,000 tons. The new particles are dispersed finely in the developed steels and show a strong pinning effect. The newly developed steels also use the intragranular ferrite (IGF) like titanium oxide bearing steel (TiO steel). In mass-production heats, γ grain size is restricted below 200 μm under conditions of 1400°C for 60 seconds. The improvement of HAZ toughness and the utilization of the thermo-mechanical control process (TMCP) has restrained the increase in carbon equivalent (Ceq,PCM) far as possible. By application of these technologies, it has been possible to mass-produce steels with high-strength, excellent CTOD properties and good weldability. As for steel plates of YS500N/mm2, the production of steel plates up to 70mm in thickness was carried out. The properties of welded joints for the 70mm-thick plates of YS500N/mm2 steel have been evaluated under heat input in 0.7kJ/mm of flux-cored are welding (FCAW) and 3.5kJ/mm of sub-merged arc welding (SAW). They have shown excellent CTOD and Charpy impact properties at welded joints; and have moreover indicated good weldability when PCM has been restricted to 0.22% or lower.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.