No abstract

Paper mill sludge is a solid waste material composed of pulp residues and ash generated from pulping and paper making processes. The carbohydrate portion of the sludge has chemical and physical characteristics similar to pulp. Because of its high carbohydrate content and well-dispersed structure, the sludges can be biologically converted to value-added products without pretreatment. In this study, two different types of paper mill sludges, primary sludge and recycle sludge, were evaluated as a feedstock for bioconversion to ethanol. The sludges were first subjected to enzymatic conversion to sugars by commercial cellulase enzymes. The enzymatic conversion was inefficient because of interference by ash in the sludges with the enzymatic reaction. The main cause was that the pH level is dictated by CaCO3 in ash, which is two units higher than the pH optimum of cellulase. To alleviate this problem, simultaneous saccharification and cofermentation (SSCF) using cellulase (Spezyme CP) and recombinant Escherichia coli (ATCC-55124), and simultaneous saccharification and fermentation (SSF) using cellulase and Saccharomyces cerevisiae (ATCC-200062) were applied to the sludges without any pretreatment. Ethanol yields of 75-81% of the theoretical maximum were obtained from the SSCF on the basis of total carbohydrates. The yield from the SSF was also found to be in the range of 74-80% on the basis of glucan. The SSCF and SSF proceeded under stable condition with the pH staying near 5.0, close to the optimum for cellulase. Decrease of pH occurred due to carbonic acid and other organic acids formed during fermentation. The ash was partially neutralized by the acids produced from the SSCF and SSF and acted as a buffer to stabilize the pH during fermentation. When the SSF and SSCF were operated in fed-batch mode, the ethanol concentration in the broth increased from 25.5 and 32.6 g/L (single feed) to 45 and 42 g/L, respectively. The ethanol concentration was limited by the tolerance of the microorganism in the case of SSCF. The ethanol yield in fed-batch operation decreased to 68% for SSCF and 70% for SSF. The high-solids condition in the bioreactor appears to create adverse effects on the cellulase reaction.

Paper mill sludge (PS), a solid waste from pulp and paper industry, was investigated as a feedstock for acetone-butanol-ethanol (ABE) production by simultaneous saccharification and fermentation (SSF). ABE fermentation of paper sludge by Clostridium acetobutylicum required partial removal of ash in PS to enhance its enzymatic digestibility. Enzymatic hydrolysis was found to be a rate-limiting step in the SSF. A total of 16.4-18.0g/L of ABE solvents were produced in the SSF of de-ashed PS with solid loading of 6.3-7.4% and enzyme loading of 10-15FPU/g-glucan, and the final solvent yield reached 0.27g/g sugars. No pretreatment and pH control were needed in ABE fermentation of paper sludge, which makes it an attractive feedstock for butanol production. The results suggested utilization of paper sludge should not only consider the benefits of buffering effect of CaCO3 in fermentation, but also take into account its inhibitory effect on enzymatic hydrolysis.

A pretreatment method using aqueous ammonia was investigated with the intent of minimizing the liquid throughput. This process uses a flowthrough packed column reactor (or percolation reactor). In comparison to the ammonia recycle percolation (ARP) process developed previously in our laboratory, this process significantly reduces the liquid throughput to one reactor void volume in packed bed (2.0-4.7 mL of liquid/g of corn stover) and, thus, is termed low-liquid ARP (LLARP). In addition to attaining short residence time and reduced energy input, this process achieves 59-70% of lignin removal and 48-57% of xylan retention. With optimum operation of the LLARP to corn stover, enzymatic digestibilities of 95, 90, and 86% were achieved with 60, 15, and 7.5 filter paper units/g of glucan, respectively. In the simultaneous saccharification and fermentation test of the LLARP samples using Saccharomyces cerevisiae (NREL-D5A), an ethanol yield of 84% of the theoretical maximum was achieved with 6% (w/v) glucan loading. In the simultaneous saccharification and cofermentation (SSCF) test using recombinant Escherichia coli (KO11), both the glucan and xylan in the solid were effectively utilized, giving an overall ethanol yield of 109% of the theoretical maximum based on glucan, a clear indication that the xylan content was converted into ethanol. The xylooligomers existing in the LLARP effluent were not effectively hydrolyzed by cellulase enzyme, achieving only 60% of digestibility. SSCF of the treated corn stover was severely hampered when the substrate was supplemented with the LLARP effluent, giving only 56% the overall yield of ethanol. The effluent appears to significantly inhibit cellulase and microbial activities.

No abstract

No abstract

Levulinic acid (LA) is a versatile specialty chemical usable as a building-block for synthesis of various chemicals. In this study, a series of solid Lewis acid catalysts were prepared and tested for glucose to fructose isomerization. We also tested Amberlyst-15, primarily a Bronsted solid acid with limited -sites of Lewis acid, to investigate conversion of fructose to LA. Among the Lewis solid acid catalysts tested, tin imbedded on large-pore zeolite (SnBeta) has shown the highest specific activity in isomerization of glucose to fructose in aqueous media. The concurrent use of the dual-catalysts of Sn-beta and Amberlyst-15 was further investigated. The dual-acid catalyst has improved the yield of LA over that of Amberlyst-15 alone, from 37 to 45% of the theoretical maximum. The improvement was due to enhanced isomerization of glucose to fructose by Sn-Beta. Stability tests have shown that the Sn-beta zeolite catalyst loses 20% of its activity after five consecutive batch-cycles. The activity of this catalyst, however, was fully regenerated by calcination. Ambelyst-15 also suffers from deactivation, which is lower than that of Sn-Beta. The deactivation is primarily due to humin deposit on the surface of the catalyst.

No abstract