Green CdSe@ZnS quantum dots (QDs) of 9.5 nm size with a composition gradient shell are first prepared by a single-step synthetic approach, and then 12.7 nm CdSe@ZnS/ZnS QDs, the largest among ZnS-shelled visible-emitting QDs available to date, are obtained through the overcoating of an additional 1.6 nm thick ZnS shell. Two QDs of CdSe@ZnS and CdSe@ZnS/ZnS are incorporated into the solution-processed hybrid QD-based light-emitting diode (QLED) structure, where the QD emissive layer (EML) is sandwiched by poly(9-vinlycarbazole) and ZnO nanoparticles as hole and electron-transport layers, respectively. We find that the presence of an additional ZnS shell makes a profound impact on device performances such as luminance and efficiencies. Compared to CdSe@ZnS QD-based devices the efficiencies of CdSe@ZnS/ZnS QD-based devices are overwhelmingly higher, specifically showing unprecedented values of peak current efficiency of 46.4 cd/A and external quantum efficiency of 12.6%. Such excellent results are likely attributable to a unique structure in CdSe@ZnS/ZnS QDs with a relatively thick ZnS outer shell as well as a well-positioned intermediate alloyed shell, enabling the effective suppression of nonradiative energy transfer between closely packed EML QDs and Auger recombination at charged QDs.

Direct methane conversion into value-added products has become increasingly important. Because of inertness of methane, cleaving the first C-H bond has been very difficult, requiring high reaction temperature on the heterogeneous catalysts. Once the first C-H bond becomes activated, the remaining C-H bonds are successively dissociated on the metal surface, hindering the direct methane conversion into chemicals. Here, a single-atom Rh catalyst dispersed on ZrO surface has been synthesized and used for selective activation of methane. The Rh single atomic nature was confirmed by extended X-ray fine structure analysis, electron microscopy images, and diffuse reflectance infrared Fourier transform spectroscopy. A model of the single-atom Rh/ZrO catalyst was constructed by density functional theory calculations, and it was shown that CH intermediates can be energetically stabilized on the single-atom catalyst. The direct conversion of methane was performed using HO in the aqueous solution or using O in gas phase as oxidants. Whereas Rh nanoparticles produced CO only, the single-atom Rh catalyst produced methanol in aqueous phase or ethane in gas phase.

It was demonstrated that organolead halide perovskites (OHPs) show a resistive switching behavior with an ultralow electric field of a few kilovolts per centimeter. However, a slow switching time and relatively short endurance remain major obstacles for the realization of the next-generation memory. Here, we report a performance-enhanced OHP resistive switching device. To fabricate topologically and electronically improved OHP thin films, we added hydroiodic acid solution (for an additive) in the precursor solution of the OHP. With drastically improved morphology such as small grain size, low peak-to-valley depth, and precise thickness, the OHP thin films showed an excellent performance as insulating layers in Ag/CHNHPbI/Pt cells, with an endurance of over 10 cycles, a high on/off ratio of 10, and an operation speed of 640 μs and without electroforming. We suggest plausible resistive switching and conduction mechanisms with current-voltage characteristics measured at various temperatures and with different top electrodes and device structures. Beyond the extended endurance, highly flexible resistive switching devices with a minimum bending radius of 5 mm create opportunities for use in flexible and wearable electronic devices.

The stability of different shapes of cuprous oxides was tested in deionized water with or without light irradiation. The morphology was degraded by the formation of CuO at the surface differently with each shape. TiIrOx-coated Cu2O particles presented improved stability for overall water splitting producing hydrogen and oxygen.

Thick biological tissues give rise to not only the multiple scattering of incoming light waves, but also the aberrations of remaining signal waves. The challenge for existing optical microscopy methods to overcome both problems simultaneously has limited sub-micron spatial resolution imaging to shallow depths. Here we present an optical coherence imaging method that can identify aberrations of waves incident to and reflected from the samples separately, and eliminate such aberrations even in the presence of multiple light scattering. The proposed method records the time-gated complex-field maps of backscattered waves over various illumination channels, and performs a closed-loop optimization of signal waves for both forward and phase-conjugation processes. We demonstrated the enhancement of the Strehl ratio by more than 500 times, an order of magnitude or more improvement over conventional adaptive optics, and achieved a spatial resolution of 600 nm up to an imaging depth of seven scattering mean free paths.