The present study reports a new three-dimensional (3D) microfluidic platform capable of rapid isolation and detection of cancer cells from a large sample volume (e.g. ~1 mL) by utilizing magnetic microbead-based technologies. Several modules, including a 3D microfluidic incubator for the magnetic beads to capture cancer cells, a microfluidic control module for sample transportation and a nucleic acid amplification module for genetic identification, are integrated into this microsystem. With the incorporation of surface-modified magnetic beads, target cancer cells can be specifically recognized and conjugated onto the surface of the antibody-coated magnetic microbeads by utilizing a swirling effect generated by the new 3D microfluidic incubator, followed by isolating and purifying the magnetic complexes via the incorporation of an external magnet and a microfluidic control module, which washes away any unbound waste solution. Experimental results show that over 90% of the target cancer cells can be isolated from a large volume of bio-samples within 10 min in the 3D microfluidic incubator. In addition, the expressed genes associated with ovarian and lung cancer cells can also be successfully amplified by using the on-chip nucleic acid amplification module. More importantly, the detection limit of the developed system is found to be 5 × 10(1) cells mL(-1) for the target cancer cells, indicating that this proposed microfluidic system may be adapted for clinical use for the early detection of cancer cells. Consequently, the proposed 3D microfluidic system incorporated with immunomagnetic beads may provide a promising automated platform for the rapid isolation and detection of cancer cells with a high sensitivity.

Ovarian cancer is the second most common of the gynecological cancers in Taiwan. It is challenging to diagnose at an early stage when proper treatment is the most effective. It is well recognized that the detection of tumor cells (TCs) is critical for determining cancer growth stages and may provide important information for accurate diagnosis and even prognosis. In this study, a new microfluidic platform integrated with a moving-wall micro-incubator, a micro flow cytometer and a molecular diagnosis module performed automated identification of ovarian cancer cells. By efficiently mixing the cells and immunomagnetic beads coated with specific antibodies, the target TCs were successfully isolated from the clinical samples. Then counting of the target cells was achieved by a combination of the micro flow cytometer and an optical detection module and showed a counting accuracy as high as 92.5 %. Finally, cancer-associated genes were amplified and detected by the downstream molecular diagnosis module. The fluorescence intensity of specific genes (CD24 and HE4) associated with ovarian cancer was amplified by the molecular diagnosis module and the results were comparable to traditional slab-gel electrophoresis analysis, with a limit of detection around 10 TCs. This integrated microfluidic platform realized the concept of a "lab-on-a-chip" and had advantages which included automation, disposability, lower cost and rapid diagnosis and, therefore, may provide a promising approach for the fast and accurate detection of cancer cells.

No abstract