Animals living in the extremely cold environment, such as polar bears, have shown amazing capability to keep warm, benefiting from their hollow hairs. Mimicking such a strategy in synthetic fibers would stimulate smart textiles for efficient personal thermal management, which plays an important role in preventing heat loss and improving efficiency in house warming energy consumption. Here, a "freeze-spinning" technique is used to realize continuous and large-scale fabrication of fibers with aligned porous structure, mimicking polar bear hairs, which is difficult to achieve by other methods. A textile woven with such biomimetic fibers shows an excellent thermal insulation property as well as good breathability and wearability. In addition to passively insulating heat loss, the textile can also function as a wearable heater, when doped with electroheating materials such as carbon nanotubes, to induce fast thermal response and uniform electroheating while maintaining its soft and porous nature for comfortable wearing.

Materials combining lightweight, robust mechanical performances, and multifunctionality are highly desirable for engineering applications. Graphene aerogels have emerged as attractive candidates. Despite recent progresses, the bottleneck remains how to simultaneously achieve both strength and resilience. While multiscale architecture designs may offer a possible route, the difficulty lies in the lack of design guidelines and how to experimentally achieve the necessary structure control over multiple length scales. The latter is even more challenging when manufacturing scalability is taken into account. The Thalia dealbata stem is a naturally porous material that is lightweight, strong, and resilient, owing to its architecture with three-dimensional (3D) interconnected lamellar layers. Inspired by such, we assemble graphene oxide (GO) sheets into a similar architecture using a bidirectional freezing technique. Subsequent freeze-drying and thermal reduction results in graphene aerogels with highly tunable 3D architectures, consequently an unusual combination of strength and resilience. With their additional electrical conductivity, these graphene aerogels are potentially useful for mechanically switchable electronics. Beyond such, our study establishes bidirectional freezing as a general method to achieve multiscale architectural control in a scalable manner that can be extended to many other material systems.

A nature-inspired water-cycling system, akin to trees, to perform effective water and solar energy management for photosynthesis and transpiration is considered to be a promising strategy to solve water scarcity issues globally. However, challenges remain in terms of the relatively low transport rate, short transport distance, and unsatisfactory extraction efficiency. Herein, enlightened by conifer tracheid construction, an efficient water transport and evaporation system composed of a hierarchical structured aerogel is reported. This architecture with radially aligned channels, micron pores, and molecular meshes is realized by applying a radial ice-template method and in situ cryopolymerization technique. This nature-inspired design benefits the aerogel excellent capillary rise performance, realizing a long-distance (>28 cm at 190 min) and quick (>1 cm at 1 s, >9 cm at 300 s) antigravity water transport on a macroscopic scale, regardless of clean water, seawater, sandy groundwater, or dye-including effluent. Furthermore, an efficient water transpiration and collection is performed by the bilayer-structured aerogel with a carbon heat collector on an aerogel top, demonstrating a solar steam generation rate of 2.0 kg m–2 h–1 with the energy conversion efficiency up to 85.7% under one solar illumination. This biomimetic design with the advantage of water transport and evaporation provides a potential approach to realize water purification, regeneration, and desalination.

Liquid absorption and recycling play a crucial role in many industrial and environmental applications, such as oil spill cleanup and recovery, hemostasis, astronauts' urine recycling, and so on. Although many liquid absorbing materials have been developed, it still remains a grand challenge to achieve both fast absorption and efficient recycling in a cost‐effective and energy‐saving manner, especially for viscous liquids such as crude oil. A smart polyurethane‐based porous sponge with aligned channel structure is prepared by directional freezing. Compared to common sponges with random porous structure, the as‐prepared smart sponge has larger liquid absorption speed due to its lower tortuosity and stronger capillary (“tortuosity effect”). More importantly, the absorbed liquid can be remotely squeezed out due to a thermally responsive shape memory effect when the sponge is heated up. Such smart sponges with well‐defined porous structure and thermal responsive self‐squeezing capability have great potential in efficient liquid absorption and recycling.

No abstract

Thermal management is the most critical technology challenge for modern electronics. Recent key materials innovation focuses on developing advanced thermal interface of electronic packaging for achieving efficient heat dissipation. Here, for the first time we report a record-high performance thermal interface beyond the current state of the art, based on self-assembled manufacturing of cubic boron arsenide (s-BAs). The s-BAs exhibits highly desirable characteristics of high thermal conductivity up to 21 W/m·K and excellent elastic compliance similar to that of soft biological tissues down to 100 kPa through the rational design of BAs microcrystals in polymer composite. In addition, the s-BAs demonstrates high flexibility and preserves the high conductivity over at least 500 bending cycles, opening up new application opportunities for flexible thermal cooling. Moreover, we demonstrated device integration with power LEDs and measured a superior cooling performance of s-BAs beyond the current state of the art, by up to 45 °C reduction in the hot spot temperature. Together, this study demonstrates scalable manufacturing of a new generation of energy-efficient and flexible thermal interface that holds great promise for advanced thermal management of future integrated circuits and emerging applications such as wearable electronics and soft robotics.

State-of-the-art experiments and modeling, challenges, and future opportunities for developing high-performance interface materials for electronics thermal management.

Bioinspired materials capable of driving liquid in a directional manner have wide potential applications in many chemical engineering processes, such as heat transfer, separation, microfluidics, and so on. Numerous natural materials and systems such as spider silk, cactus, shorebirds, desert beetles, butterfly wing, and Nepenthes alata have been serving as a rich source of inspirations in the area. During the last decades, great efforts have been devoted to design bioinspired smart materials for directional liquid transport. In this review, we begin by introducing several natural materials and systems with surface structural features contributing for their directional liquid transport property, followed by the basic concepts and theories about surface wettability, droplet motion, and driving forces with different structural features. Then, we summarize some typical applications of such bioinspired smart materials in industrial processes and chemical engineering, particularly in heat transfer, separation, and microfluidic systems. At the end, future perspectives of such bioinspired smart materials for directional liquid transport are discussed.