Metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) have been one of the most studied materials in recent past and efforts are continuing to uncover their fascinating properties at various levels like gas storage/separation, catalysis, sensing and drug delivery. One of the most intriguing phenomena observed in MOFs is stimuli responsive "dynamic behavior" which can arise either locally from flexible ligands and /or from the global cooperative movement of the frameworks that consequences selective capture or recognition of the specific molecule. Such flexible frameworks shows hysteretic and gated sorption profiles for selective adsobate molecules and also exhibit guest repsonive modulation of opto-electronic and magnetic properties. For example tuning of permanent porosity and modulation of magnetic properties by post-synthetic modification using light in a porous coordination polymer is yet to be accounted. Such synergism, where two different functionalities are combined, would open up the possibility and prospect of finding novel physical phenomena for designing new smart materials. This talk would try to explore some of these stiumuli responsive metal-organic framework systems and their different functionalities.

A luminescent mixed lanthanide metal-organic framework approach has been realized to explore luminescent thermometers. The targeted self-referencing luminescent thermometer Eu(0.0069)Tb(0.9931)-DMBDC (DMBDC = 2, 5-dimethoxy-1, 4-benzenedicarboxylate) based on two emissions of Tb(3+) at 545 nm and Eu(3+) at 613 nm is not only more robust, reliable, and instantaneous but also has higher sensitivity than the parent MOF Tb-DMBDC based on one emission at a wide range from 10 to 300 K.

Porous materials find widespread application in storage, separation, and catalytic technologies. We report a crystalline porous solid with adaptable porosity, in which a simple dipeptide linker is arranged in a regular array by coordination to metal centers. Experiments reinforced by molecular dynamics simulations showed that low-energy torsions and displacements of the peptides enabled the available pore volume to evolve smoothly from zero as the guest loading increased. The observed cooperative feedback in sorption isotherms resembled the response of proteins undergoing conformational selection, suggesting an energy landscape similar to that required for protein folding. The flexible peptide linker was shown to play the pivotal role in changing the pore conformation

Using the achiral diazine ligands bearing two bidentate pyridylimino groups as sources of conformational chirality, five azido-bridged coordination polymers are prepared and characterized crystallographically and magnetically. The chirality of the molecular units is induced by the coordination of the diazine ligands in a twisted chiral conformation. The use of L(1) (1,4-bis(2-pyridyl)-1-amino-2,3-diaza-1,3-butadiene) and L(2) (1,4-bis(2-pyridyl)-1,4-diamino-2,3-diaza-1,3-butadiene) induces spontaneous resolution, yielding conglomerates of chiral compounds [Mn(3)(L(1))(2)(N(3))(6)](n) (1) and [Mn(2)(L(2))(2)(N(3))(3)](n)(ClO(4))(n).nH(2)O (2), respectively, where triangular (1) or double helical (2) chiral units are connected into homochiral one-dimensional (1D) chains via single end-to-end (EE) azido bridges. The chains are stacked via hydrogen bonds in a homochiral fashion to yield chiral crystals. When L(3) (2,5-bis(2-pyridyl)-3,4-diaza-2,4-hexadiene) is employed, a partial spontaneous resolution occurs, where binuclear chiral units are interlinked into fish-scale-like homochiral two-dimensional (2D) layers via single EE azido bridges. The layers are stacked in a heterochiral or homochiral fashion to yield simultaneously a racemic compound, [Mn(2)(L(3))(N(3))(4)](n) (3a), and a conglomerate, [Mn(2)(L(3))(N(3))(4)](n).nMeOH (3b). On the other hand, the ligand without amino and methyl substituents (L(4), 1,4-bis(2-pyridyl)-2,3-diaza-1,3-butadiene) does not induce spontaneous resolution. The resulting compound, [Mn(2)(L(4))(N(3))(4)](n) (4), consists of centrosymmetric 2D layers with alternating single diazine, single EE azido, and double end-on (EO) azido bridges, where the chirality is destroyed by the centrosymmetric double EO bridges. These compounds exhibit very different magnetic behaviors. In particular, 1 behaves as a metamagnet built of homometallic ferrimagnetic chains with a unique "fused-triangles" topology, 2 behaves as a 1D antiferromagnet with alternating antiferromagnetic interactions, 3a and 3b behave as spin-canted weak ferromagnets with different critical temperatures, and 4 also behaves as a spin-canted weak ferromagnet but exhibits two-step magnetic transitions.

A template-free synthesis of a hierarchical microporous-mesoporous metal-organic framework (MOF) of zinc(II) 2,5-dihydroxy-1,4-benzenedicarboxylate (Zn-MOF-74) is reported. The surface morphology and porosity of the bimodal materials can be modified by etching the pore walls with various synthesis solvents for different reaction times. This template-free strategy enables the preparation of stable frameworks with mesopores exceeding 15 nm, which was previously unattained in the synthesis of MOFs by the ligand-extension method.

The synthesis of mesoporous Prussian blue analogues through a template-free methodology and the application of these mesoporous materials as high-performance cathode materials in sodium-ion batteries is presented. Crystalline mesostructures were produced through a synergistically coupled nanocrystal formation and aggregation mechanism. As cathodes for sodium-ion batteries, the Prussian blue analogues all show a reversible capacity of 65 mA h g-1 at low current rate and show excellent cycle stability. The reported method stands as an environmentally friendly and low-cost alternative to hard or soft templating for the fabrication of mesoporous materials.

The worlds oceans, where uranium is found quite uniformly at a concentration of 3.3 mg L À1 , present an alternative source of uranium to terrestrial mining for nuclear fuel. Environmental concerns associated with mining will undoubtedly increase as reserves are depleted, thus increasing the utility of more environmentally friendly feedstocks. [1][2][3][4] Hence, before terrestrial resources become scarce, the development of sorbents designed for seawater extraction is of strategic importance to guarantee future uranium resources. From the first inorganic adsorbents, which showed poor selectivity and mechanical resistance, to the most recent polyethylene-fiberbased sorbents containing amidoxime-carboxylic acid copolymers, and more recently layered metal sulfides and metalorganic frameworks, interest in uranium seawater extractions has continuously increased among governments worldwide. [5][6][7][8][9][10] Because the concentration of uranium in the oceans is relatively low, maximization of the adsorption properties of sorbents, for example, through changes in their surface area and pore structure, can greatly improve the kinetics of uranium extraction and the adsorption capacity simultaneously. [11] To facilitate the uptake of uranyl ions with fast kinetics, various sorbents containing the amidoxime group, such as hydrogels, [12] particles and beads, [13] membranes, [14] macroporous fibers, [15] and composites, [16] have been prepared by suspension polymerization, radiation-induced grafting, and even sonochemical functionalization. However, silica beads and most carbon materials have a relatively small accessible surface area for the growth of large polymers or a low number of surface sites available for the grafting of functional groups. Thus, the design of substrates with large numbers of accessible reactive sites for the grafting of polymeric surface groups is necessary for the development of materials with improved uranium-adsorption capacity.Recently, porous polymers based on divinylbenzene (DVB) have been developed for applications in separations and catalysis. [17] For example, the copolymerization of p-styrene sulfonate with divinylbenzene led to a catalytically active porous polymer. This method has the additional advantage that polymers can be obtained with controlled porosity and high surface areas without porogens. It is thus time-and cost-effective, as well as more environmentally friendly than the templated synthesis of carbonaceous materials. [18] Motivated by these findings, we report herein nanoporous polymers based on the vinylbenzyl chloride (VBC) monomer and the DVB cross-linking agent. As well as a well-developed nanoporous structure of micro-and mesopores, the obtained polymers contain large numbers of accessible chlorine species, which can be used as initiators for atom-transfer radical polymerization (ATRP). These materials are the first examples of ATRP initiators in which the initiator species is located within the framework of the mesoporous support. The accessible framework and surface...

Human apolipoprotein E (APOE) exists in three isoforms ε2, ε3, and ε4, of which APOE4 is the main genetic risk factor of Alzheimer's disease (AD). As cerebrovascular defects are associated with AD, we tested whether APOE genotype has an impact on the integrity and function of the blood-brain barrier (BBB) in human APOE-targeted replacement mice. Using the quantitative in situ brain perfusion technique, we first found lower (13.0% and 17.0%) brain transport coefficient (Clup) of [ 3 H]-diazepam in APOE4 mice at 4 and 12 months, compared with APOE2 and APOE3 mice, reflecting a decrease in cerebral vascularization. Accordingly, results from immunohistofluorescence experiments revealed a structurally reduced cerebral vascularization (26% and 38%) and thinner basement membranes (30% and 35%) in 12-month-old APOE4 mice compared with APOE2 and APOE3 mice, suggesting vascular atrophy. In addition, APOE4 mice displayed a 29% reduction in [ 3 H]-D-glucose transport through the BBB compared with APOE2 mice without significant changes in the expression of its transporter GLUT1 in brain capillaries. However, an increase of 41.3% of receptor for advanced glycation end products (RAGE) was found in brain capillaries of 12-month-old APOE4 mice. In conclusion, profound divergences were observed between APOE genotypes at the cerebrovascular interface, suggesting that APOE4-induced BBB anomalies may contribute to AD development.