The accurate, continuous analysis of healthcare-relevant gases such as nitrogen oxides (NOx) in a humid environment remains elusive for low-cost, stretchable gas sensing devices. This study presents the design and demonstration of a moisture-resistant, stretchable NOx gas sensor based on laser-induced graphene (LIG). Sandwiched between a soft elastomeric substrate and a moisture-resistant semipermeable encapsulant, the LIG sensing and electrode layer is first optimized by tuning laser processing parameters such as power, image density, and defocus distance. The gas sensor, using a needlelike LIG prepared with optimal laser processing parameters, exhibits a large response of 4.18‰ ppm−1 to NO and 6.66‰ ppm−1 to NO2, an ultralow detection limit of 8.3 ppb to NO and 4.0 ppb to NO2, fast response/recovery, and excellent selectivity. The design of a stretchable serpentine structure in the LIG electrode and strain isolation from the stiff island allows the gas sensor to be stretched by 30%. Combined with a moisture-resistant property against a relative humidity of 90%, the reported gas sensor has further been demonstrated to monitor the personal local environment during different times of the day and analyze human breath samples to classify patients with respiratory diseases from healthy volunteers. Moisture-resistant, stretchable NOx gas sensors can expand the capability of wearable devices to detect biomarkers from humans and exposed environments for early disease diagnostics.

No abstract

The surge in air pollution and respiratory diseases across the globe has spurred significant interest in the development of flexible gas sensors prepared by low-cost and scalable fabrication methods. However, the limited breathability in the commonly used substrate materials reduces the exchange of air and moisture to result in irritation and a low level of comfort. This study presents the design and demonstration of a breathable, flexible, and highly sensitive NO2 gas sensor based on the silver (Ag) decorated laser-induced graphene (LIG) foam. The scalable laser direct writing transforms the self-assembled block copolymer and resin mixture with different mass ratios into highly porous LIG with varying pore sizes. Decoration of Ag nanoparticles on the porous LIG further increases the specific surface area and conductivity to result in a highly sensitive and selective composite to detect nitrogen oxides. The as-fabricated Ag/LIG gas sensor on a flexible polyethylene substrate exhibits a large response of -12‰, fast response/recovery of 40/291 s, a low detection limit of a few ppb at room temperature. Integrating the Ag/LIG composite on diver fabric substrates further results in breathable gas sensors and intelligent clothing, which allows permeation of air and moisture to provide long-term practical use with an improved level of comfort.

Although flexible humidity sensors are essential for human health monitoring, it is still challenging to achieve high sensitivity and easy disposal with simple, low-cost fabrication processes. This study presents the design and fabrication of highly reliable hand-drawn interdigital electrodes from pencil-on-paper treated with NaCl solution for highly sensitive hydration sensors working over a wide range of relative humidity (RH) levels from 5.6% to 90%. The applications of the resulting flexible humidity sensor go beyond the monitoring of respiratory rate and proximity to characterizations of human skin types and evaluations of skin barrier functions through insensible sweat measurements. The sensor array can also be integrated with a diaper to result in smart diapers to alert for an early diaper change. The design and fabrication strategies presented in this work could also be leveraged for the development of wearable, self-powered, and recyclable sensors and actuators in the future.

Monitoring nitrogen utilization e ciency and soil temperature in agricultural systems for timely intervention is essential to monitor crop health, promote sustainable and precision agriculture, and reduce environmental pollution. Therefore, it is of vital signi cance to develop a multi-parameter sensor for effectively and accurately decoupled detection of nitrogen loss and soil temperature, which is yet to be reported. Herein, this work presents a high-performance multi-parameter sensor based on vanadium oxide (VO X )-doped laser-induced graphene (LIG) foam to completely decouple nitrogen oxides (NO X ) and temperature. By exploiting the laser-assisted synthesis, the highly porous 3D VO X -doped LIG foam composite is readily obtained by laser scribing of vanadium sul de (V 5 S 8 )-doped block copolymer and phenolic resin self-assembled lms. Compared with the intrinsic LIG, the heterojunction formed at the LIG/VO X interface provides the sensor with a signi cantly enhanced response to NO X and an ultralow limit of detection (LOD) of 3 ppb at room temperature. Meanwhile, the sensor can accurately detect temperature over a wide linear range of 10-110℃ with a small detection limit of 0.2℃. The encapsulation of the sensor with a soft membrane further allows for temperature sensing without being affected by NO X , presenting an effective strategy to decouple nitrogen loss and soil temperature for accurate soil environmental monitoring. The sensor without encapsulation but operated at elevated temperature removes the in uences of ambient relative humidity and temperature variations for accurate NO X measurements. The capability to simultaneously detect ultra-low NO X concentrations and small temperature changes paves the way for the development of future multimodal electronic devices with decoupled sensing mechanisms for health monitoring and precision agriculture.