Single‐walled carbon nanotube (SWNT)/poly(methyl methacrylate) (PMMA) composites were prepared using coagulation method. The electrical conductivity and the electromagnetic interference (EMI) shielding of SWNT/PMMA composites over the X‐band (8–12 GHz) and the microwave (200–2000 MHz) frequency range have been investigated. The electrical conductivity of composites increases with SWNT loading by 13 orders of magnitude, from 10−15 to 10−2 Ω−1 cm−1 with a percolation threshold of about 3 wt% SWNTs. The effect of the sample thickness on the shielding effectiveness has been studied, and correlated to the electrical conductivity of composites. The data suggest that SWNT/PMMA composites containing higher SWNT loading (above 10 wt%) be useful for EMI shielding and those with lower SWNT loading be useful for electrostatic charge dissipation. The dominant shielding mechanism of SWNT/PMMA composites was also discussed. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers

Lactobacillus plantarum is a widespread bacterial species and is commonly used as a probiotic. L. plantarum PFM105 was isolated from the rectum of a healthy sow. Here we found that L. plantarum PFM105 showed probiotic effect on weaning piglets in which intestinal inflammation and unbalanced gut microbiota happened frequently. L. plantarum PFM105 was identified to improve the growth of weaning piglet and promote the development of small intestinal villi. Antibiotics are often used in weaning piglet to prevent intestinal infection and promote the growth of animal. We found that weaning piglets feeding with L. plantarum PFM105 showed similar growth promotion but decreased diarrhea incidence compared with those feeding with antibiotics. High-throughput sequencing was used to analyze the gut microbiota in weaning piglets treated with L. plantarum PFM105 or antibiotics. The relative abundance of beneficial microbes Prevotellaceae and Bifidobacteriaceae were increased in colon of weaning piglet feeding L. plantarum PFM105, while antibiotics increased the relative abundance of bacteria associated with pathogenicity, such as Spirochaeta and Campylobacteraceae. L. plantarum PFM 105 increased indicators of intestinal health including serum levels of IgM, IL-10, and TGF-β, and colonic levels of SCFAs. We found strong correlations between the alterations in gut microbiota composition caused by feeding antibiotics and probiotics and the measured growth and health parameters in weaning piglets. The addition of L. plantarum PFM105 could significantly increase the relative abundance of metabolic genes which may important to intestinal microbiota maturation. Altogether, we demonstrated here that L. plantarum PFM 105 could promote intestinal development through modulation of gut microbiota in weaning piglets.

Background Alfalfa (Medicago sativa) is an important forage material widely used for animal feed production. Ensiling is an effective method for preserving alfalfa, but it has shown some limitations in the production of high-quality alfalfa silage due to its low water soluble carbohydrates (WSC) content and high buffering capacity. Lactic acid bacteria (LAB) and cellulase are often used as silage additives to promote the ensiling process and enhance fermentation quality. Methods Experiments were conducted to investigate the effects of ferulic acid esterase (FAE)-producing Lactobacillus fermentum 17SD-2 (LF) and cellulase (CE) on the fermentation quality and microbial community of alfalfa silage. After 60 days of ensiling, analysis of fermentation quality and bacterial diversity in alfalfa silages were conducted using high-performance liquid chromatography and high-throughput sequencing methods. Results Alfalfa was ensiled with additives (LF, CE, and LF+CE) or without additives for 60 days. All additives increased lactic acid and decreased pH values and ammonia-N contents compared to control. Among all treatments, the combined addition of LF and CE showed lowest pH (4.66) and ammonia-N (NH3-N, 0.57% DM) content, highest contents of lactic acid (LA, 10.51% DM), dry matter (DM, 22.54%) and crude protein (CP, 24.60% DM). Combined addition of LF and CE performed better in reducing neutral detergent fiber (NDF, 29.76% DM) and acid detergent fiber (ADF, 22.86% DM) contents than the addition of LF (33.71, 27.39% DM) or CE (32.07, 25.45% DM) alone. Moreover, the microbial analysis indicated that LF+CE treatments increased the abundance of desirable Lactobacillus and inhibited the growth of detrimental Enterobacter and Clostridia in alfalfa silage. Discussion Combined addition of FAE-producing LF and CE is more effective than treatments of LF or CE alone in improving fermentation quality and nutrition values of alfalfa silage. This is likely due to a synergistic effect of CE and FAE produced by LF on plant cell wall degradation, indicating that these additives promote each other to improve fiber degradation and silage fermentation. In conclusion, combined addition of FAE-producing LF and CE could be a feasible way to improve alfalfa silage quality.

Enterotoxigenic Escherichia coli (ETEC) is a leading cause of infectious diarrhea in children and postweaning piglets. ETEC infection results in induced pro-inflammatory responses in intestinal epithelial cells and dysbiosis of intestinal microbiota. Here, a Lactobacillus reuteri strain, HCM2, isolated from a healthy piglet showed a high survival rate in the harsh gastrointestinal tract environment and inhibited the growth of ETEC and its adherence to intestinal epithelial cells. Pre-supplementation with L. reuteri HCM2 for 14 days reduced the ETEC load in the jejunum of ETEC-infected mice and prevented the disruption of intestinal morphology by ETEC. The colonic microbiota of mice with or without HCM2 pre-supplementation were analyzed, and this analysis revealed that HCM2 could prevent dysbiosis caused by ETEC infection by stabilizing the relative abundance of dominant bacteria. These results indicate that L. reuteri HCM2 has the potential to attenuate the effect of ETEC on the colonic microbiota in infected mice.

Graphical Abstract

Heavy metals are concerned for its adverse effect on human health and long term burden on biogeochemical cycling in the ecosystem. In this study, a provincial-level emission inventory of 13 kinds of heavy metals including V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd, Sn, Sb, Ba and Pb from 10 anthropogenic sources was developed for China, based on the 2015 national emission inventory of primary particulate matters and source category-specific speciation profiles collected from 50 previous studies measured in China. Uncertainties associated with the speciation profiles were also evaluated. Our results suggested that total emissions of the 13 types of heavy metals in China are estimated at about 58000 ton for the year 2015. The iron production is the dominant source of heavy metal, contributing 42% of total emissions of heavy metals. The emissions of heavy metals vary significantly at regional scale, with largest amount of emissions concentrated in northern and eastern China. Particular, high emissions of Cr, Co, Ni, As and Sb (contributing 8%-18% of the national emissions) are found in Shandong where has large capacity of industrial production. Uncertainty analysis suggested that the implementation of province-specific source profiles in this study significantly reduced the emission uncertainties from (-89%, 289%) to (-99%, 91%), particularly for coal combustion. However, source profiles for industry sectors such as non-metallic mineral manufacturing are quite limited, resulting in a relative high uncertainty. The high-resolution emission inventories of heavy metals are essential not only for their distribution, deposition and transport studies, but for the design of policies to redress critical atmospheric environmental hazards at local and regional scales. Detailed investigation on source-specific profile in China are still needed to achieve more accurate estimations of heavy metals in the future.

Aligned Cr-doped ZnO nanorods have been successfully fabricated at 600 °C by in situ doping of Cr into ZnO nanorods using a vapor transport approach. Comprehensive structural analyses indicate that dopant Cr occupies Zn sites in ZnO and nanorods align along the [0001] direction. Photoluminescence spectra reveal unusual features peaked at 401 and 488 nm, respectively. Magnetic measurements have shown that nanorod arrays exhibit ferromagnetism at 10 and 293 K, which is likely due to defect-mediated exchange interactions. Nanomechanical studies have revealed a critical buckling load of 517 µN and a buckling energy of ca. 4.2 × 10 -11 J, respectively, for the Cr-doped ZnO nanorod arrays.

Due to the challenges of antibiotic resistance to global health, bacteriocins as antimicrobial compounds have received more and more attention. Bacteriocins are biosynthesized by various microbes and are predominantly used as food preservatives to control foodborne pathogens. Now, increasing researches have focused on bacteriocins as potential clinical antimicrobials or immune-modulating agents to fight against the global threat to human health. Given the broad- or narrow-spectrum antimicrobial activity, bacteriocins have been reported to inhibit a wide range of clinically pathogenic and multidrug-resistant bacteria, thus preventing the infections caused by these bacteria in the human body. Otherwise, some bacteriocins also show anticancer, anti-inflammatory, and immune-modulatory activities. Because of the safety and being not easy to cause drug resistance, some bacteriocins appear to have better efficacy and application prospects than existing therapeutic agents do. In this review, we highlight the potential therapeutic activities of bacteriocins and suggest opportunities for their application.