High performance solution‐processed fluorescent and phosphorescent organic light emitting diodes (OLEDs) are achieved by water solution processing of lacunary polyoxometalates used as novel electron injection/transport materials with excellent electron mobilities and hole blocking capabilities. Green fluorescent OLEDs using poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐(1,4‐benzo‐{2,1′,3}‐thiadiazole)] (F8BT) as the emissive layer and our polyoxometalates as electron transport/hole blocking layers give a luminous efficiency up to 6.7 lm W−1 and a current efficiency up to 14.0 cd A−1 which remained nearly stable for about 500 h of operation. In addition, blue phosphorescent OLEDs (PHOLEDs) using poly(9‐vinylcarbazole) (PVK):1,3‐bis[2‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazo‐5‐yl]benzene (OXD‐7) as a host and 10.0 wt% FIrpic as the blue dopant in the emissive layer and a polyoxometalate as electron transport material give 12.5 lm W−1 and 30.0 cd A−1 power and luminous efficiency, respectively, which are among the best performance values observed to date for all‐solution processed blue PHOLEDs. The lacunary polyoxometalates exhibit unique properties such as low electron affinity and high ionization energy (of about 3.0 and 7.5 eV, respectively) which render them as efficient electron injection/hole blocking layers and, most importantly, exceptionally high electron mobility of up to 10−2 cm2 V−1 s−1.

Effective interface engineering has been shown to play a vital role in facilitating efficient charge-carrier transport, thus boosting the performance of organic photovoltaic devices. Herein, we employ water-soluble lacunary polyoxometalates (POMs) as multifunctional interlayers between the titanium dioxide (TiO) electron extraction/transport layer and the organic photoactive film to simultaneously enhance the efficiency, lifetime, and photostability of polymer solar cells (PSCs). A significant reduction in the work function (W) of TiO upon POM utilization was observed, with the magnitude being controlled by the negative charge of the anion and the selection of the addenda atom (W or Mo). By inserting a POM interlayer with ∼10 nm thickness into the device structure, a significant improvement in the power conversion efficiency was obtained; the optimized POM-modified poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2- 33 ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]:[6,6]-phenyl-C butyric acid methyl ester (PTB7:PCBM)-based PSCs exhibited an efficiency of 8.07%, which represents a 21% efficiency enhancement compared to the reference TiO cell. Similar results were obtained in POM-modified devices based on poly(3-hexylthiophene) (P3HT) with electron acceptors of different energy levels, such as PCBM or indene-C bisadduct (ICBA), which enhanced their efficiency up to 4.34 and 6.21%, respectively, when using POM interlayers; this represents a 25-33% improvement as compared to the reference cells. Moreover, increased lifetime under ambient air and improved photostability under constant illumination were observed in POM-modified devices. Detailed analysis shows that the improvements in efficiency and stability synergistically stem from the reduced work function of TiO upon POM coverage, the improved nanomorphology of the photoactive blend, the reduced interfacial recombination losses, the superior electron transfer, and the more effective exciton dissociation at the photoactive layer/POM/TiO interfaces.

A silanol-functionalized polyoxometalate improves the electron collecting interface.

Multiple functionality of tungsten polyoxometalate (POM) has been achieved applying it as interfacial layer for solution processed high performance In2O3 thin film transistors, which results in overall improvement of device performance. This approach not only reduces off-current of the device by more than two orders of magnitude, but also leads to a threshold voltage reduction, as well as significantly enhances the mobility through facilitated charge injection from the electrode to the active layer. Such a mechanism has been elucidated through morphological and spectroscopic studies.

Background: Several studies have assessed the effect of patient education regarding hand eczema (HE) severity and quality of life. Few studies, however, have evaluated patients' knowledge.Objectives: To examine knowledge of skin protection in HE patients following a guided talk, and to identify variables associated with knowledge. Methods: HE patients referred to the outpatient dermatological clinic, BispebjergHospital, between January 2013 and July 2014 were offered a guided talk on HE prevention. HE severity and the Dermatology Life Quality Index (DLQI) score were assessed. A questionnaire comprising 10 questions about skin protection was sent 1 to 2.5 years later.Results: One hundred and twenty patients responded to the questionnaire (response 53.5%). The mean percentage of correct answers was 74.7%. Sixty per cent responded correctly to at least eight questions. Male sex, older age and education for >5 years were associated with a low level of knowledge. Education for 3 to 4 years (P = 0.045) was associated with a higher level of knowledge. No significant impact of previous/current atopic dermatitis, HE severity or previous information on skin protection was found with respect to level of knowledge.Conclusions: Females and patients with education for 3 to 4 years showed the highest level of knowledge, whereas males, older patients and patients with education for >5 years should be brought more into focus in skin protection programmes. K E Y W O R D S education, hand eczema, knowledge, prevention

No abstract

No abstract

No abstract